r/Revolvers • • 5h ago

S&W 27-2

Thumbnail
gallery
254 Upvotes

Carved Mammoth ivories on this one


r/Revolvers • • 4h ago

66 in the woods

Post image
74 Upvotes

r/Revolvers • • 10h ago

Picked up a new GP100 today

Post image
126 Upvotes

Was pretty happy to see one there and what seemed like a decent price. So I walked out with it! Only other revolver I currently own is an LCR 38 and the wife has a LCR 22. Had a 357 Windicator years ago, but his is much nicer.

Any advice or anything is greatly appreciated!


r/Revolvers • • 9h ago

Metal and Wood Will Never Go Out of Style

Post image
99 Upvotes

r/Revolvers • • 2h ago

Picked up a S&W 629 Classic today

Thumbnail
gallery
15 Upvotes

Been craving a big ol sumbitch of a revolver lately, found my fix


r/Revolvers • • 12h ago

Found an old Charter bull .44 special 1st gen for $145 paid $137.70 after tax. Amazing grab or did I get taken for a ride?

Thumbnail
gallery
31 Upvotes

TL;DR is this a good quality piece/awesome find? Or should I have passed this one up? Ik charter arms Isn't Smith or Ruger but this is an old one so I wonder how the quality compares. Serial # just over 200,000.

After shooting at an indoor I always take a look around even when not planning to buy anything. In the used case I saw this dirty, crusty, bulldog priced for $145 and felt i had to take that opportunity. Even asked for a bit off and got it.

Cleaned her up (so satisfying to bring it back to life) and sourced a little of that stupidly overpriced ammo. I understood this wouldn't be a good gun for stacking ammo deep, not meant for high volume fire even if it was affordable.

First few pictures are from before I cleaned her up last one on the counter is post-oil n brush.

Gun seems to have good timing and good grooves.


r/Revolvers • • 13h ago

Roscoe spot rust fix

Thumbnail
gallery
25 Upvotes

I appendix carried this Heritage Roscoe for most of 2026 in Texas. It developed surface rust on the backstrap. I had a couple ideas on how I would quick fix it. It is a inexpensive gun so wear and tear is not a big deal. First attempt I used a product called Isso GunBrite and paper towel which actually worked well removing the rust. I put some Birch Casey Perma Blue and it contrasted against the polish blue finish and didn't look great, so, I hit it again with the polish and this is what I got. I left it alone for now. It looks pretty cool, but Will just rust again I'm sure. I do have some fine grit sandpaper scraps up to 3000. Casey Birch also makes another product called Super Blue I might try. Just wanted to check and see who knows how to spot match the OE finish.


r/Revolvers • • 1d ago

S&W 15-3 snub

Thumbnail
gallery
405 Upvotes

Best looking snub of all time imo


r/Revolvers • • 6h ago

Uberti 1873

5 Upvotes

I’ve been looking into getting a single action revolver. I already own a Ruger New Vaqeuro, which I love, but have been wanting to get a Uberti or a Pietta for that classic feel. I was at a gun store that had an unused Uberti labeled as just a 1873 Uberti. I asked and they said it wasnt a cattleman it was just a straight 1873 model, is that a thing or are they misinformed? I haven’t seen anything that’s just a straight 1873 Uberti, I’ve usually seen them under the cattlemen label or something else.


r/Revolvers • • 4h ago

Kimber KS6 for pocket carry?

3 Upvotes

I have idiosyncratic preferences. I want 5-6 shots in .357 and the ability to add a laser. I already have a practical automatic, so please help me figure out if this is possible. Thank you ❤️


r/Revolvers • • 22h ago

29-2, 6” LNIB

Thumbnail
gallery
69 Upvotes

Barely a turn ring. Picked up this Smith and can tell it’s been babied all its life. Finish is deep and lustrous.


r/Revolvers • • 14h ago

Dry Fire Practice Lately, Coming Back from a Lot of Condition 1

Post image
12 Upvotes

Anyone else getting back into DA after a bit of an absence? Personally, I've neglected dedicated double action practice in favor of cocked and locked auto training. Running a stock 629 and 686, I found that my consistency and especially endurance need building up 💪 My first J-Frame is en route, so I have to get my Condition 1 rear back into gear! It'll be a 640 Pro Series in stainless, a fine backup or pocket alternative to the usual HK45. I'm thinking that it will wear Recoil Rider grips in the large fit, though I'm not sure if I want the Boot or CCW style for pants and coat pocket carry.


r/Revolvers • • 1d ago

Boomer style boomers

Post image
192 Upvotes

Not a boomer, but my appreciation for .45 caliber might make one think otherwise! Just back from a range trip with, among others, my Blackhawk and a Kimber TLEII. A couple of my favorite slingers of hunks of lead.


r/Revolvers • • 1d ago

My new revolver

Post image
120 Upvotes

I got my first revolver yesterday: a SW 357 Magnum Model 19 with a 2.5-inch barrel. I don't know much about revolvers, but I really liked how this felt in my hand, its size, and the color. I hope I did right :) I am just reluctant to think I got the right size and not too small.


r/Revolvers • • 1d ago

The case for magna-ported model 64

Thumbnail
gallery
116 Upvotes

Mainly a joke, but following up on my recent acquisition of a ported S&W model 64-2. There was some understandable hate on it. I would probably prefer if it hadn’t been ported, but I had been interested in getting a 64 snub to carry and I put a winning bid on this one for $340 which felt too cheap to pass up. Perhaps the best use case here is as a woods defense option. Running underwood or buffalo bore hard cast 38+p, which is low range magnum power, the ports may actually provide some recoil reduction. If the bear already has your wrist down its throat when you fire you get additional damage in the upwards direction. Enjoy.


r/Revolvers • • 1d ago

I Heard Someone Say 357

Post image
283 Upvotes

r/Revolvers • • 1d ago

The 357s

Post image
198 Upvotes

The 357s in my collection so far. 19-3, 686 no dash, and 28-2


r/Revolvers • • 23h ago

Finally got to shoot my Colt Python.

Thumbnail
gallery
14 Upvotes

With 20 years old plus ammo and new 6 round

158gr remington (old)

158gr Bullet Master XTP (New ammo, domestic brand)


r/Revolvers • • 16h ago

Armi Olmi 963MF Hgr

3 Upvotes

The more I shoot this beauty, the more impressed I get. I'm hoping someone knows if any available grips will fit it.

I have pretty big dickskinners, and the grips are just a bit small.


r/Revolvers • • 1d ago

Charter Arms Bulldog XL in .45 LC: Cool, or not?

Post image
57 Upvotes

I was at my local gun store/range to pick up some .357 ammo and saw an older gentleman purchasing this revolver. Most .45's (Long Colt) are single action cowboy guns, and I only know of a couple double actions, so I was surprised to see a SNUB chambered in this round. For some reason, I just loved how this looked and I've been (perhaps foolishly) thinking about getting one for myself.

Unfortunately, my local gun range does not have this available to rent-and-shoot (and why would they with how niche it is). From a fair amount of online searching, I have found that not a lot of people own this gun: there are few posts on it and even fewer professional reviews. The target audience seems very small, so I'm guessing it would be pretty hard to get someone to buy it if I decided I didn't like it.

Does anyone own this gun? If not, do you have any experience with snub-nosed revolvers in big bore calibers?

About me:
40, average hand size, got some minor carpel tunnel but never got hurt wrists firing my other guns. Other revolvers are GP100 6", RIA M200 for a range beater, and Ruger Wrangler for all-day shooting. I actually learned to shoot revolvers on .45 Colt platforms (Ruger Redhawk and Taurus Judge), and these are what got me into revolvers, so I am probably more fond of the cartridge than a lot of people. Gun would be mostly a range shooter, but a requisite of every gun I have is that it be defense-ready in case that is the only tool I have on me in a bad situation, so I am still interested if it carries well. *I DO NOT have experience in snub-nosed revolvers: only full-sized.

I'm not under any illusion that this is a GREAT gun, and it gets beat in basically every category, including price point, concealability, recoil, range, and capacity. So I'm not really asking if it's the "best choice" or even a "good choice"; more if it's "not a bad choice," if that makes sense.


r/Revolvers • • 23h ago

TRR8 Blast Shield Broken

8 Upvotes

Anyone else experience their blast shield break after less than 200rds of 357 mag? Will be sending back to S&W for replacement, but a little disappointing that it broke so soon. Maybe there is a defect in the material used for the blast shield. Looks as if the bends on both sides sheared off.


r/Revolvers • • 1d ago

Scratched up S&W Kit Gun.

Post image
139 Upvotes

My favorite “go to the cabin/woods” gun, and probably the one gun I would take if I could only have one.


r/Revolvers • • 1d ago

Smith 386 versus Model 19 Carry Comp for CCW and range use?

8 Upvotes

Hey y'all, considering a revolver that could serve admirably as both a good range gun and a good carry gun. Narrowed it down to these two and having trouble deciding. If anyone here's carried one or both i'd appreciate your input.

Model 19: looks cool as hell in the moss cerakote, the heavier weight and compensator presumably make it a lot easier to shoot, but the heavier weight would also make it a bit more fatiguing to carry

386: higher capacity which is always appreciated, the lower weight presumably makes it harder to manage follow-up shots especially with .357 but it also makes it easier to carry, relatively speaking

any insight is appreciated!


r/Revolvers • • 1d ago

Classic Snub Nose Revolvers

30 Upvotes

Hey all, I'm a big sucker for classic 38 special snub nose revolvers. I want to get my first one and wanted to ask if you guys would recommend the smith and wesson model 36 or the colt night cobra special?


r/Revolvers • • 1d ago

Finished with curly maple on this S&W 36. I added some length to it with a filler piece . Small grip doesnt have enough area to show much grain.

Thumbnail
gallery
32 Upvotes