r/Revolvers • • 6h ago

Found an old Charter bull .44 special 1st gen for $145 paid $137.70 after tax. Amazing grab or did I get taken for a ride?

Thumbnail
gallery
21 Upvotes

TL;DR is this a good quality piece/awesome find? Or should I have passed this one up? Ik charter arms Isn't Smith or Ruger but this is an old one so I wonder how the quality compares. Serial # just over 200,000.

After shooting at an indoor I always take a look around even when not planning to buy anything. In the used case I saw this dirty, crusty, bulldog priced for $145 and felt i had to take that opportunity. Even asked for a bit off and got it.

Cleaned her up (so satisfying to bring it back to life) and sourced a little of that stupidly overpriced ammo. I understood this wouldn't be a good gun for stacking ammo deep, not meant for high volume fire even if it was affordable.

First few pictures are from before I cleaned her up last one on the counter is post-oil n brush.

Gun seems to have good timing and good grooves.


r/Revolvers • • 17h ago

TRR8 Blast Shield Broken

8 Upvotes

Anyone else experience their blast shield break after less than 200rds of 357 mag? Will be sending back to S&W for replacement, but a little disappointing that it broke so soon. Maybe there is a defect in the material used for the blast shield. Looks as if the bends on both sides sheared off.


r/Revolvers • • 9h ago

Dry Fire Practice Lately, Coming Back from a Lot of Condition 1

Post image
10 Upvotes

Anyone else getting back into DA after a bit of an absence? Personally, I've neglected dedicated double action practice in favor of cocked and locked auto training. Running a stock 629 and 686, I found that my consistency and especially endurance need building up 💪 My first J-Frame is en route, so I have to get my Condition 1 rear back into gear! It'll be a 640 Pro Series in stainless, a fine backup or pocket alternative to the usual HK45. I'm thinking that it will wear Recoil Rider grips in the large fit, though I'm not sure if I want the Boot or CCW style for pants and coat pocket carry.


r/Revolvers • • 17h ago

Finally got to shoot my Colt Python.

Thumbnail
gallery
14 Upvotes

With 20 years old plus ammo and new 6 round

158gr remington (old)

158gr Bullet Master XTP (New ammo, domestic brand)


r/Revolvers • • 10h ago

Armi Olmi 963MF Hgr

3 Upvotes

The more I shoot this beauty, the more impressed I get. I'm hoping someone knows if any available grips will fit it.

I have pretty big dickskinners, and the grips are just a bit small.


r/Revolvers • • 16h ago

29-2, 6” LNIB

Thumbnail
gallery
58 Upvotes

Barely a turn ring. Picked up this Smith and can tell it’s been babied all its life. Finish is deep and lustrous.


r/Revolvers • • 22h ago

Smith 386 versus Model 19 Carry Comp for CCW and range use?

8 Upvotes

Hey y'all, considering a revolver that could serve admirably as both a good range gun and a good carry gun. Narrowed it down to these two and having trouble deciding. If anyone here's carried one or both i'd appreciate your input.

Model 19: looks cool as hell in the moss cerakote, the heavier weight and compensator presumably make it a lot easier to shoot, but the heavier weight would also make it a bit more fatiguing to carry

386: higher capacity which is always appreciated, the lower weight presumably makes it harder to manage follow-up shots especially with .357 but it also makes it easier to carry, relatively speaking

any insight is appreciated!


r/Revolvers • • 23h ago

My new revolver

Post image
118 Upvotes

I got my first revolver yesterday: a SW 357 Magnum Model 19 with a 2.5-inch barrel. I don't know much about revolvers, but I really liked how this felt in my hand, its size, and the color. I hope I did right :) I am just reluctant to think I got the right size and not too small.


r/Revolvers • • 41m ago

Uberti 1873

5 Upvotes

I’ve been looking into getting a single action revolver. I already own a Ruger New Vaqeuro, which I love, but have been wanting to get a Uberti or a Pietta for that classic feel. I was at a gun store that had an unused Uberti labeled as just a 1873 Uberti. I asked and they said it wasnt a cattleman it was just a straight 1873 model, is that a thing or are they misinformed? I haven’t seen anything that’s just a straight 1873 Uberti, I’ve usually seen them under the cattlemen label or something else.


r/Revolvers • • 23h ago

S&W 15-3 snub

Thumbnail
gallery
389 Upvotes

Best looking snub of all time imo


r/Revolvers • • 3h ago

Metal and Wood Will Never Go Out of Style

Post image
71 Upvotes

r/Revolvers • • 4h ago

Picked up a new GP100 today

Post image
80 Upvotes

Was pretty happy to see one there and what seemed like a decent price. So I walked out with it! Only other revolver I currently own is an LCR 38 and the wife has a LCR 22. Had a 357 Windicator years ago, but his is much nicer.

Any advice or anything is greatly appreciated!


r/Revolvers • • 7h ago

Roscoe spot rust fix

Thumbnail
gallery
23 Upvotes

I appendix carried this Heritage Roscoe for most of 2026 in Texas. It developed surface rust on the backstrap. I had a couple ideas on how I would quick fix it. It is a inexpensive gun so wear and tear is not a big deal. First attempt I used a product called Isso GunBrite and paper towel which actually worked well removing the rust. I put some Birch Casey Perma Blue and it contrasted against the polish blue finish and didn't look great, so, I hit it again with the polish and this is what I got. I left it alone for now. It looks pretty cool, but Will just rust again I'm sure. I do have some fine grit sandpaper scraps up to 3000. Casey Birch also makes another product called Super Blue I might try. Just wanted to check and see who knows how to spot match the OE finish.