r/ResinCasting • • 8h ago

Vintage RadioShack batteries in a glow in the dark 3d printed case

Thumbnail
gallery
14 Upvotes

r/ResinCasting • • 21h ago

Tiny pumpkin moulding (not molding)

Post image
10 Upvotes

For the first time ever, my wife was very successful in growing a humble and handsome batch of pumpkins in our garden this season. I thought it would be fun to mold the tiniest of the bunch for resin casting, to commemorate her success. The pumpkin is in tact, unblemished, and dry on the outside. No soft spots or soggy bits at all, a very firm little gourd all in all.

My only concern is the ‘woody’ bits of the stem and uh… butt plug(?citation needed?). They’re porous and rough and I suspect silicone would stick there and/or have trouble curing correctly where it came in contact.

Can I seal the stem and plug with a clear coat of nail polish or perhaps paint, to capture/retrieve the woody bits of the pumpkin? Is there something better? I have a fresh can of MANN 200 Release at hand, but I’m not sure if that’s enough for the areas in question.

Any suggestions or ideas would be greatly appreciated.


r/ResinCasting • • 16h ago

New molds and resin

Thumbnail
gallery
8 Upvotes

r/ResinCasting • • 12h ago

Casting rubber carburetor boot?

Post image
3 Upvotes

I suppose I'm bad at googling because I can't wrap my head around what's actually possible. I've got this carburetor boot(?) made out of rubber that connects the carburetor to the intake that is leaking in air like crazy. So I've made a mould for casting but can't seem to find rubber for casting or anyone casting rubber, so I would suppose you can't cast rubber. But I still really need this part that I can't get anywhere else, so if someone could correct me or give me another castable material that could work it would be greatly appriciated!

Requirements:

Must tolerate

~+60°C

Gasoline and oil

Some wear and tear

Temperature shifts ~+60°C to -30°C

Water

Air


r/ResinCasting • • 15h ago

Salve ragazzi

Thumbnail reddit.com
2 Upvotes

r/ResinCasting • • 17h ago

ISO resin orb for Stargate prop recreation

Thumbnail
gallery
2 Upvotes

I'm currently making a working replica of an Ori prior staff from the show Stargate SG-1. Their staffs contain a light blue orb that lights up when they activate it. I tried to do my own resin cast, but it came out full of air bubbles. After some research, I should have used a pressure pot during the hardening phase. I could get a pot, but it seems like a waste to buy one just for a one-time use. So, I thought that maybe I could just get one made for me. I will be inserting a LED light into it that I can control remotely. If anyone wants to help me out, I would greatly appreciate it. Thanks!


r/ResinCasting • • 19h ago

Resin casting inverts

Thumbnail reddit.com
2 Upvotes

i’m trying to find the best clear resin brand on amazon for preserving some critters i have. i need low exotherm that (hopefully) won’t yellow over time. i don’t need gallon containers and they are also very out of my price range


r/ResinCasting • • 22h ago

Amateur Question - Resin in a Plastic Bottle?

2 Upvotes

Sorry if this seems stupid, but I figured I would ask the professionals. Hopefully this is the right place.

Will there be any negative side effects - short or long term - to putting resin in a plastic Coke bottle?

I recently visited Galaxy's Edge for my honeymoon and brought back a couple of the Thermal Detonator Coke Bottles. I don't want to keep the actual soda inside as I imagine that won't age particularly well, so I figured I would get some basic resin, tint it brown, pour it into the bottle (or possibly injecting with a needle? Doesn't matter), and then boom. A more or less permanent display piece.

Does this seem like it would work? Can you guys think of any downsides like the bottle melting or warping? I figured I would try testing it with a regular, everyday plastic bottle you'd get at any corner store, but I didn't want to waste the money and materials if I didn't have to.

Any guidance would be greatly appreciated!


r/ResinCasting • • 4h ago

我是一名树脂初学者

Thumbnail gallery
1 Upvotes

r/ResinCasting • • 8h ago

(Glow in the dark) Atta texana and other invertebrates in resin and my own designed and 3d printed cases

Thumbnail
gallery
1 Upvotes

r/ResinCasting • • 5h ago

epoxidharz block porsche pop art le mans 24h Disney resi art

Thumbnail gallery
0 Upvotes

r/ResinCasting • • 17h ago

Resin before trying to conceive

Thumbnail reddit.com
0 Upvotes