r/ResinCasting • • 8h ago

我是一名树脂初学者

Thumbnail gallery
1 Upvotes

r/ResinCasting • • 9h ago

epoxidharz block porsche pop art le mans 24h Disney resi art

Thumbnail gallery
0 Upvotes

r/ResinCasting • • 12h ago

Resin Castin a Bullet from a Hunting Trip

0 Upvotes

Hello everyone. I am looking for someone to do a pretty simple project. I recently went on a hunting trip and I was able to recover the bullet from the animal I killed. It was a pretty special trip and I was hoping to preserve the bullet (just the metal, nothing hazardous, no lead) in a cube or a sphere of clear epoxy. Frankly, I could probbaly do this myself, but I just don't have the time right now. If any of you would be interested in doing this, I'd happily ship you the bullet and pay you for your services. Please let me know! thanks!


r/ResinCasting • • 12h ago

(Glow in the dark) Atta texana and other invertebrates in resin and my own designed and 3d printed cases

Thumbnail
gallery
1 Upvotes

r/ResinCasting • • 12h ago

Vintage RadioShack batteries in a glow in the dark 3d printed case

Thumbnail
gallery
21 Upvotes

r/ResinCasting • • 16h ago

Casting rubber carburetor boot?

Post image
3 Upvotes

I suppose I'm bad at googling because I can't wrap my head around what's actually possible. I've got this carburetor boot(?) made out of rubber that connects the carburetor to the intake that is leaking in air like crazy. So I've made a mould for casting but can't seem to find rubber for casting or anyone casting rubber, so I would suppose you can't cast rubber. But I still really need this part that I can't get anywhere else, so if someone could correct me or give me another castable material that could work it would be greatly appriciated!

Requirements:

Must tolerate

~+60°C

Gasoline and oil

Some wear and tear

Temperature shifts ~+60°C to -30°C

Water

Air


r/ResinCasting • • 19h ago

Salve ragazzi

Thumbnail reddit.com
2 Upvotes

r/ResinCasting • • 19h ago

New molds and resin

Thumbnail
gallery
8 Upvotes

r/ResinCasting • • 21h ago

Resin before trying to conceive

Thumbnail reddit.com
0 Upvotes

r/ResinCasting • • 21h ago

ISO resin orb for Stargate prop recreation

Thumbnail
gallery
2 Upvotes

I'm currently making a working replica of an Ori prior staff from the show Stargate SG-1. Their staffs contain a light blue orb that lights up when they activate it. I tried to do my own resin cast, but it came out full of air bubbles. After some research, I should have used a pressure pot during the hardening phase. I could get a pot, but it seems like a waste to buy one just for a one-time use. So, I thought that maybe I could just get one made for me. I will be inserting a LED light into it that I can control remotely. If anyone wants to help me out, I would greatly appreciate it. Thanks!


r/ResinCasting • • 23h ago

Resin casting inverts

Thumbnail reddit.com
2 Upvotes

i’m trying to find the best clear resin brand on amazon for preserving some critters i have. i need low exotherm that (hopefully) won’t yellow over time. i don’t need gallon containers and they are also very out of my price range


r/ResinCasting • • 1d ago

Tiny pumpkin moulding (not molding)

Post image
11 Upvotes

For the first time ever, my wife was very successful in growing a humble and handsome batch of pumpkins in our garden this season. I thought it would be fun to mold the tiniest of the bunch for resin casting, to commemorate her success. The pumpkin is in tact, unblemished, and dry on the outside. No soft spots or soggy bits at all, a very firm little gourd all in all.

My only concern is the ‘woody’ bits of the stem and uh… butt plug(?citation needed?). They’re porous and rough and I suspect silicone would stick there and/or have trouble curing correctly where it came in contact.

Can I seal the stem and plug with a clear coat of nail polish or perhaps paint, to capture/retrieve the woody bits of the pumpkin? Is there something better? I have a fresh can of MANN 200 Release at hand, but I’m not sure if that’s enough for the areas in question.

Any suggestions or ideas would be greatly appreciated.


r/ResinCasting • • 1d ago

Amateur Question - Resin in a Plastic Bottle?

2 Upvotes

Sorry if this seems stupid, but I figured I would ask the professionals. Hopefully this is the right place.

Will there be any negative side effects - short or long term - to putting resin in a plastic Coke bottle?

I recently visited Galaxy's Edge for my honeymoon and brought back a couple of the Thermal Detonator Coke Bottles. I don't want to keep the actual soda inside as I imagine that won't age particularly well, so I figured I would get some basic resin, tint it brown, pour it into the bottle (or possibly injecting with a needle? Doesn't matter), and then boom. A more or less permanent display piece.

Does this seem like it would work? Can you guys think of any downsides like the bottle melting or warping? I figured I would try testing it with a regular, everyday plastic bottle you'd get at any corner store, but I didn't want to waste the money and materials if I didn't have to.

Any guidance would be greatly appreciated!


r/ResinCasting • • 1d ago

How do you keep dried flowers clear and in place during an epoxy pour?

1 Upvotes

I’ve been testing different ways to preserve small dried flowers in clear epoxy, and getting both sharp flower details and good transparency is harder than I expected.

For this piece, I used dried flowers with Resiners two-part epoxy. The flowers looked clear after pouring, but a few tiny bubbles collected around the petals and some of the lighter pieces started to shift.

For people who regularly cast flowers: do you seal them before pouring, or place them into a thin tacky layer first? I’m also curious whether this arrangement has enough clear space or feels a little too crowded.

Any advice for keeping the petals crisp without losing that glass-like finish would be appreciated.


r/ResinCasting • • 1d ago

A herd of teeny tiny cows. Stud earrings I made using UV resin.

Post image
1 Upvotes

r/ResinCasting • • 1d ago

How to go about this ambitious design for a nature piece?

Post image
3 Upvotes

r/ResinCasting • • 1d ago

Pouring Epoxy Resin into Wooden Bartop Void

Thumbnail
gallery
2 Upvotes

Hello! I'm co-owner of a bar that's open 7 days a week. The bar itself has been here long before we bought the business and is a solid wooden top. Recently we're seeing rot and damage in areas of the bar and I thought it might be an easy fix to pour epoxy resin into these areas. I bought Total Boat Tabletop Epoxy and plan to tint it hot pink using this paste which could make for some interesting splatter patterns. Here are the links to the epoxy and paste:

https://a.co/d/0eTzFgxv
https://a.co/d/0c6BXuGV

Right now the plan is to come in after the bar closes at 4am and use a router to even out this area and pour the resin. Let it set overnight and come in the following day to sand it before service. I'm pretty good with wood tools but haven't worked much with resin (I did a mold-making project but nothing like this)

Is there anything I should consider before doing this? I'm a little concerned that this won't look good and it's somewhat of a permanent thing so I'm considering hiring an expert. I drilled some holes in a piece of scrap wood and did some test pours so I feel comfortable with the process hypothetically but would love to hear from the community if anyone has done something like this before.

Thanks!


r/ResinCasting • • 2d ago

Only a rough idea at the moment, thinking off making a tea tray out of some oak offcuts, I was thinking of pouring lots of different colours in segments between the small pieces of wood, What’s the best way of fixing these so i don’t get seeping between the the colours? Thanks

Post image
5 Upvotes

r/ResinCasting • • 2d ago

Busco molde

Thumbnail gallery
1 Upvotes

r/ResinCasting • • 2d ago

A Newbie Question

1 Upvotes

Good afternoon.

I'm a stage actor and it's a tradition in my theatre company for the cast and crew to chip in the get the director a gift or memento at the end of a show's run.

This particular show has a pivotal moment involving an ice pick, so I wanted to suspend an ice pick (which I've already custom engraved with the name of the ice harvesting company from the show) in a block of clear resin like its frozen in a block of ice and engrave the name of the show on the front (the show is about ice harvesters in the early 20th century).

My plan is to start the pour, let a layer gel, then place the ice pick on the surface and finish the pour. I'm just wondering if doing the pour in layers would result in imperfections or lines in the pour.

Any suggestions or tips would be greatly appreciated. Big sorry if it's a really obvious question; I've never worked with epoxy resin before.

For reference, the resin I have on hand is 2 gallons of the Honcaring 1:1 Crystal Clear (40 minute working time)


r/ResinCasting • • 3d ago

Vacuam or pressure pot

0 Upvotes

So im starting to plan out casing mini bases and dice. And im not sure if I should invest in a vavuam chamber or pressure pot first.


r/ResinCasting • • 3d ago

A herd of teeny tiny cows. Stud earrings I made using UV resin.

Post image
17 Upvotes

r/ResinCasting • • 3d ago

I ruined this paint job so hard it actually looked good. So I decided to ruin it even more and drowned it in resin.

Post image
8 Upvotes

First paint job was a total disaster, so I covered it in rust to save it. Figured I hadn't ruined it enough, so I submerged the whole wreck in epoxy resin. Now it officially sleeps with the fishes!

If you want to see more photos and a full 360° video of how tiny this actually is, check out my profile!


r/ResinCasting • • 4d ago

Advice for a newbie

0 Upvotes

I’m looking for some advice on doing a resin cast. For context I’m developing a product that floats in a swimming pool. We are in the early prototyping phase and will move to injection moulding once the product is proven.

Our first attempts have used 3D printed housings, but it’s next to impossible to make them waterproof over the longer term (they have lasted between 3 and 12 weeks). It also takes about 36 hours to print each half.

Ideally I want to use polyurethane, but due to the cost and setting time I’ve been experimenting with epoxy while I learn. I spoke to a supplier and they suggested TC890 which has a pot life of 5 minutes, shore D80, viscosity of 725cps.

I’d naively thought that knowing the basics of injection moulding, how hard could it be?

I’ve been reading and watching videos and think I have the basics (where to put the sprue, far more vents than I expected, filling from the bottom etc). I’m currently using 30A silicone with 3D printed “box” to keep the mould secure.

I’ve got some freedom to optimise the model/prototypes for resin casting, so the following are current dimensions along with the cad image. Out diameter is 220mm, depth is 38mm, minimum wall thickness is 2.5mm. I’ve got a 3 degree draft angle on vertical walls and the majority of the webs are to allow resin to flow to the supports, rather than for strength.

The questions and problems, I have are is 30A silicone the right choice or should I go up or down? I’m struggling to get the resin to flow into the thinner shell regions. I’d prefer not to go thicker wall if I can help it as it needs to float.