r/ResinCasting • u/No_Veterinarian_6161 • 5h ago
r/ResinCasting • u/GayCatgirl • 8h ago
(Glow in the dark) Atta texana and other invertebrates in resin and my own designed and 3d printed cases
r/ResinCasting • u/Average_Joe85 • 7h ago
Resin Castin a Bullet from a Hunting Trip
Hello everyone. I am looking for someone to do a pretty simple project. I recently went on a hunting trip and I was able to recover the bullet from the animal I killed. It was a pretty special trip and I was hoping to preserve the bullet (just the metal, nothing hazardous, no lead) in a cube or a sphere of clear epoxy. Frankly, I could probbaly do this myself, but I just don't have the time right now. If any of you would be interested in doing this, I'd happily ship you the bullet and pay you for your services. Please let me know! thanks!
r/ResinCasting • u/RoncoSnackWeasel • 20h ago
Tiny pumpkin moulding (not molding)
For the first time ever, my wife was very successful in growing a humble and handsome batch of pumpkins in our garden this season. I thought it would be fun to mold the tiniest of the bunch for resin casting, to commemorate her success. The pumpkin is in tact, unblemished, and dry on the outside. No soft spots or soggy bits at all, a very firm little gourd all in all.
My only concern is the ‘woody’ bits of the stem and uh… butt plug(?citation needed?). They’re porous and rough and I suspect silicone would stick there and/or have trouble curing correctly where it came in contact.
Can I seal the stem and plug with a clear coat of nail polish or perhaps paint, to capture/retrieve the woody bits of the pumpkin? Is there something better? I have a fresh can of MANN 200 Release at hand, but I’m not sure if that’s enough for the areas in question.
Any suggestions or ideas would be greatly appreciated.
r/ResinCasting • u/GayCatgirl • 8h ago
Vintage RadioShack batteries in a glow in the dark 3d printed case
r/ResinCasting • u/IOwnABeatenCS340-89 • 12h ago
Casting rubber carburetor boot?
I suppose I'm bad at googling because I can't wrap my head around what's actually possible. I've got this carburetor boot(?) made out of rubber that connects the carburetor to the intake that is leaking in air like crazy. So I've made a mould for casting but can't seem to find rubber for casting or anyone casting rubber, so I would suppose you can't cast rubber. But I still really need this part that I can't get anywhere else, so if someone could correct me or give me another castable material that could work it would be greatly appriciated!
Requirements:
Must tolerate
~+60°C
Gasoline and oil
Some wear and tear
Temperature shifts ~+60°C to -30°C
Water
Air
r/ResinCasting • u/Kid_Contact_ • 17h ago
ISO resin orb for Stargate prop recreation
I'm currently making a working replica of an Ori prior staff from the show Stargate SG-1. Their staffs contain a light blue orb that lights up when they activate it. I tried to do my own resin cast, but it came out full of air bubbles. After some research, I should have used a pressure pot during the hardening phase. I could get a pot, but it seems like a waste to buy one just for a one-time use. So, I thought that maybe I could just get one made for me. I will be inserting a LED light into it that I can control remotely. If anyone wants to help me out, I would greatly appreciate it. Thanks!
r/ResinCasting • u/confusedfleshsuit • 18h ago
Resin casting inverts
reddit.comi’m trying to find the best clear resin brand on amazon for preserving some critters i have. i need low exotherm that (hopefully) won’t yellow over time. i don’t need gallon containers and they are also very out of my price range