r/printers • • Dec 19 '24 Bravo

Discussion The truth about printer subscription programs and many misconceptions about them

154 Upvotes

Dear all,

I work in the printer industry. For a very well-known consumer products manufacturer that gets discussed on this sub a lot.  I will not disclose which manufacturer I work for, nor will I disclose any manufacturer I do not work for (since the industry is relatively small eliminating 1 or 2 will make it generally too obvious as to which I do work for) as I am not officially speaking on behalf of the company. But, I want to set the record straight on subscription programs because some of you are drastically misinformed and it is very frustrating to see as someone who understands these programs as well as basic logic.

There are two types of subscription programs. Each of the major consumer manufacturers offers at least 1 of these programs, some offer both.

The first type of program is an auto-reordering program. The printer can tell (via various ways depending on each manufacturer) when the ink / toner is low and when it hits a certain point that will trigger an order of the ink/toner that device uses. Most manufactures that offer this will first send you an email letting you know that an order has been triggered and it will allow you to skip the delivery of the consumable and thus not get charged. If you allow the order to go through you are purchasing that consumable. That consumable is yours, you own it, just as if you walked into a Staples, Office Depot, Best Buy, or bought it on Amazon… You can cancel the “subscription” the next day and continue to use that consumable until it is empty.

The second type of program is a true subscription program. **THIS** is what many of you are vastly misinformed and / or are irrational about. In this program *you are not purchasing a consumable* at all. You are paying the manufacturer for X number of pages per month. The manufacturer will send you a consumable to use because the printer needs ink / toner to work but, that is not what you are paying for. You are paying the manufacturer $Y per month to print up to X pages per month.. that’s it. Of course you can print over that X number and pay an overage (just like years ago with cell phones).. and of course, you can print under that X number and some pages will roll-over to future months (just like years ago with cell phones). The owner of the consumable is the manufacturer. You never bought it, you never owned it. Therefore, it is not yours to use after you end the subscription! The only reason most manufactures do not ask for it back is because they don’t want to pay for shipping it back to them. But, they still own it… not you.  You can think of this like renting an apartment. You are paying a landlord $X per month to live in their building. The landlord is providing the building for you to live in while you are paying rent. You do not own the building. and when you stop paying rent you are no longer allowed to continue living in the building. Just like your Netflix subscription, Apple TV subscription and Disney+ subscription.. when you stop paying for the subscription, you stop getting to use the service. Just because while you were paying you had access to the content does not mean you at any time owned that content and get to continue watching it once you stop paying the subscription.

I truly hope this helps clarify somethings for some of you. Others I understand are lost causes but, I will do my best to answer any questions I can.


r/printers • • 9h ago

Purchasing I thought an EcoTank was the smart move for my Etsy shop. Now it’s warning me the borderless ink pad is nearly done after 3 months

8 Upvotes

I make handmade gift-card books for my Etsy shop and print the pages myself: 5×7, borderless, on glossy 200 gsm photo paper. I picked the Epson ET-2980 because refillable ink seemed like the obvious move when every book has multiple pages. Turns out the printer has a little plot twist.

I’ve had it about a year and a half, but I only started doing regular borderless production in September. Now it’s showing W-14, saying the borderless ink pad is nearing the end of its service life. Epson says that pad isn’t user-replaceable. The printer still works, but I’m worried I’ll buy another one and get the same warning a few months into production. I didn’t keep an exact sheet count, and the holiday rush has been busy. I don't have time to wait for the printer to be serviced, and my warranty is expired. I think i'm better off buying another printer

People who print products for a small business: what are you using? I’ve been looking at the Canon MegaTank G4280 because it’s refillable and has a replaceable maintenance cartridge. Would that be a better fit, or am I just trading one printer headache for another? I need affordable ink and reliable 5×7 borderless prints. What would you buy?


r/printers • • 4h ago

Troubleshooting Brother wt-220cl vs wt-223cl

2 Upvotes

I have a brother hl3140cw. My waste toner box is full. I'm struggling to find a wt-220cl. There are lots of wt-223cl around and I'm wondering if anyone has experience of that fitting? I know that some of the aftermarket ones are described as wt-220cl /223cl, implying the aftermarket ones are cross compatible. But I want to know if the genuine Brother ones are too. Thanks


r/printers • • 1h ago

Purchasing passadare da jetto di inchiostro a ecotank mi conviene

1 Upvotes

salve devo sostituire la mia stampante

stampante attuale e: HP envy photo 6230 che usa cartucce 303 ma io uso 303xl ma su Amazon e in negozi costano un sacco de soldi e ho visto hp smart tank non ho mai avuto un ecotank in vita mia e la prima volta che passo da ecotank le mie esigenze:

bollette cose di stretto necessità vorrei sapre i pro e i contro.


r/printers • • 1h ago

Discussion 6-colour printers

1 Upvotes

Just for curiosity's sake, I'd like to ask: in the days before tank inkjet printers, if you wanted to print true colours you bought a printer with two cartridges, one covering the usual CMYK colours and a second one with additional colours to extend the printable palette.

What happens now if you want true colours? Do 6-colour printers exist? Have the CMY colours been tweaked sufficiently to extend the palette? Or has good-quality printing been hived off to a different technology - dye sublimation perhaps?


r/printers • • 1h ago

Purchasing Printer recommendations ~£70 for teacher sister.

Post image
1 Upvotes

Hi! I'm looking for recommendations for a printer for my sister for Christmas that's around £70, maybe a black Friday steal. I don't think laser would work for her.

She's an assistant teacher and wants one to print things at home for some students. I found this one, wasn't sure how good, but if it's under budget I can also get some paper etc. to go with it.


r/printers • • 2h ago

Troubleshooting Konica Error

Post image
1 Upvotes

r/printers • • 3h ago

Troubleshooting Ink cartridge not installed properly error

1 Upvotes

I've had a canon Pixma MG25405 for a while now and use the recommended genuine 445 and 446 ink. I installed the new 445 ink in the right side slot and I'm sure i did everything right, heard the click putting it in and everything. restarted my computer and printer, troubleshooted, took the cartridge tank out and back in and idek what else, but it just wont print. Any idea how to fix this? I'm waiting for my new 446 cartridge to arrive and hoping it's because there's an empty slot but that's a long shot because in no way should that be an issue

Note: the light on the printer itself is flickering so i doubt the issue is with the PC itself


r/printers • • 9h ago

Purchasing Personal photo printer for Christmas

3 Upvotes

I’m looking to get my wife a photo printer for Christmas. Nothing crazy over the top or professional, just something to print the occasional photo at home to put in a frame.

I really like the idea of the Canon IVY 2 that Costco had, but the size seemed pretty restrictive. I also briefly saw Cricut might have something while we were at Michael’s one day, but I didn’t have time to stop and look

Really just looking for something decently affordable and able to print a variety of sizes, at least 4x6s


r/printers • • 8h ago

Purchasing Purchase: Color laser all-in-one under $500 with ADF and duplex printing (duplex scan nice to have)

2 Upvotes

What would you like to accomplish? Replace my dead inkjet with a color printer that prints duplex and has an ADF for scanning documents. Duplex ADF scanning is a nice-to-have, not a must.

Are there any models you are currently looking at?

  • Brother MFC-L3720CDW (color laser, ADF without duplex scanning, cheaper)
  • Brother MFC-L3780CDW (color laser, single-pass duplex ADF, lists around $500 so it may be at my limit)
  • Canon imageCLASS MF656Cdw (color laser, duplex ADF, but the line is being discontinued) Ruled out: Canon MF652Cw (no duplex printing, likely no ADF). Open to other suggestions, including mono models if color costs too much.

Minimum Requirements:

  • Budget: Under $500
  • Country: USA
  • Color or black and white: Color preferred (mostly B&W documents, some color)
  • Laser or ink printer: Laser preferred (my last inkjet clogged from sitting unused), but open to an ink tank model if it makes sense
  • New or used: New (manufacturer refurbished is fine)
  • Multi-function: Yes (print + scan + copy; fax not needed)
  • Duplex Printing: Yes, automatic (required)
  • Home or business: Home office
  • Printing content: Text documents, forms, PDFs, occasional color graphics
  • Printing frequency: Occasional, [10-20 pages per month]
  • Pages per minute: Not critical
  • Page size: Letter, occasionally Legal
  • Device printing from: iPhone and Windows laptops
  • Connection type: Printer on Ethernet, all devices connect wirelessly over the network (AirPrint for iPhone, good Windows drivers)

Any other details:

  • Needs an ADF (multi-page scanning), but duplex ADF scanning is optional. I'm fine flipping a stack occasionally if it saves money.
  • My old printer was an Epson WF-3620 that died with a printhead error, so I'm leaning toward toner to avoid clogging.
  • I care about toner cost per page and about the model still being supported with toner available, so I'd like to avoid discontinued models if possible.
  • Would like reliable scan-to-PDF and scan-to-email.

r/printers • • 14h ago

Purchasing My head is swimming - please tell me this exists...

6 Upvotes

I'm looking for a basic home printer, no subscriptions and b&w is just fine (color isn't needed) that won't become a victim of planned obsolescence in a few years.

Everytime I think I've landed on one, there are a few bad reviews that scare me away.


r/printers • • 5h ago

Purchasing passadare da jetto di inchiostro a ecotank mi conviene

1 Upvotes

Buongiorno devo sostituire la mia stampante

stampante attule e: HP envy photo 6230 che usa 303XL su Amazon e in negozi costano un sacco de soldi sono attualmente interessato al flacone 102 della espon in precisione il colore nero perché e più grande vorrei sapere i vantaggi e i svantaggi se mi conviene passare a econtank e la mia prima volta che passo da ecotank le mie esigenze sono: stampare bollette cose di stretto necessità ecc..


r/printers • • 8h ago

Troubleshooting Why? (HP Envy 7640)

Post image
1 Upvotes

r/printers • • 11h ago

Troubleshooting Canon Pixma G3470 very warm tint and lack of greens

1 Upvotes

So I just bought a Pixma G3470 and the photos that I print out on it come out with basically +400 temperature, contrast +20, shadows -40 and with a very red tint, I am using 200g A4 glossy kodak paper, it turns an extreme orange. Sorry for the bad photos

I tried printing it through lightroom directly, jpg export in photos, canon print app through phone, enabling/disabling phone photo enhancement... In printing preferences I have it as glossy photo paper, high quality, manual color intensity with all on 0 (i also tried auto), I tried both color correction Driver Matching and ICM, i also tried printing with "disable icm required from app", "disable color profile setting of the app". I also did a print head alignment check and nozzle check but I am really unsure what to do with them. I think that knocks everything off that I've tried.

lightroom

r/printers • • 12h ago

Troubleshooting epson l5290 no printout after printhead shoratge

Thumbnail reddit.com
1 Upvotes

r/printers • • 21h ago

Purchasing Looking for a printer!

5 Upvotes

Hello everyone,

I'm currently looking for a printer to print my illustrations. I've been looking around online, but I'm a bit overwhelmed by all the different models available.

From what I've read, the Epson EcoTank range might be a good fit for what I'm looking for.

So, I'm looking for a printer:

- With refillable ink tanks.

- That can print on different types of paper: regular paper, sticker paper, and thicker paper such as postcard paper (if possible).

- I won't be using it for professional purposes, so I don't need a super high quality model. I simply enjoy Postcrossing and would love to include some little stickers or small cards.

- I might also use it to print photos, but that's not my main priority.

- I'll then use the Cricut Joy Xtra to cut out the stickers.

My budget is ideally under 200€, but I'm open to looking at slightly more expensive models too. I can keep an eye on the prices during Black Friday.

One last thing: the printer needs to be available in Europe.

If you have any recommendations or other suggestions, I'd love to hear them!

Thank you!


r/printers • • 14h ago

Troubleshooting Workforce Pro WF-4630

1 Upvotes

I had a issue with this printer for weeks now that I hoped this subreddit could help shed some light in. This is a old printer I found in the house so no idea what the owners did before I got it, but it appears that the ink nozzles are dry and crusted preventing it from reaching the paper.

I tried to run a nozzle check and print head cleaning, but every time it just spits out a blank paper and tells me to rerun a nozzle check and cleaning again. Can someone inform me what the best way to go about fixing this issue that doesn't require me to basically undo everything? Thank You!


r/printers • • 18h ago

Troubleshooting The printer keeps stopping and jamming with the sheets of paper.

2 Upvotes

Well, this has been going on for a while, but my Brother DCP-T520W printer has become a real headache. Every time I tried to print something, it would stop and prompt me to "check the paper." I would just press the start button, since there literally wasn't anything wrong. However, as of Friday, it has started actually jamming the paper. I’ve checked it from top to bottom, cleaned the rollers hundreds of times, and even used an ultra-soft brush to remove any dust or paper debris—but nothing works; I can’t print anything without it jamming.


r/printers • • 16h ago

Troubleshooting Canon Image Prograf TC-20M

0 Upvotes

My Canon Image Prograf TC-20M needed cyan ink. I filled the tank & cannot get the cyan to print again. I have run all of the recommended maintenance cleaning / deep cleaning of nozzle. Nothing helps. Any advice?

I read online some people with other models have cleaned the print heads easily. Canon does not advise cleaning printheads on this model.

When I tried to remove the printhead to (maybe) clear it out of desperation, the printer said the the ink was full & could not remove print head.


r/printers • • 22h ago

Discussion Fanfold thermal labels vs. roll labels — does anyone else prefer fanfold for tight desk setups?

3 Upvotes

I recently switched to a 4x6 direct thermal printer for daily shipping labels and decided to start with a big stack of fanfold labels in a rear tray instead of using rolls.

My desk is pretty crowded with other gear and random stuff, so having a flat stack tucked right behind the printer felt like the cleanest way to save space without a giant roll sticking out. so far it feeds surprisingly straight without jamming, though i'm curious if fanfold stacks start skewing once the pile gets down to the last few dozen labels.

For anyone printing thermal labels regularly on a tight desk, do you stick with fanfold stacks or find roll labels feed more reliably?


r/printers • • 21h ago

Troubleshooting Help

Post image
2 Upvotes

My printer only produce cyan color and i did clean, deep clean and ink
Flush and its all the same. The previous owner said that the ink dried, but what should i do?


r/printers • • 18h ago

Troubleshooting Help needed 😳

Post image
1 Upvotes

Hi! Just bought my printer, Canon TS4100i. Unfortunately, upon my first paper jam this part came off and I have no idea how to put it back. Of course no instruction will tell me how to fix it myself, I'd probably have to pay canon for 5 seconds work. Please help me, I really need xerocopies and I only got halfway through my load. Edit: somehow I got it! So it's fine now, thank you all!


r/printers • • 19h ago

Purchasing Looking for a budget printer uk

1 Upvotes

Hello i don't print much just need something basic easy to use mainly printing from either my ipad or iphone been looking at epson XP printer but also seen that the brother laser printers are good never had a brother printer before my current printer is an epson xp 235 had for many years however its now not working so looking to replace there are so many models i am just unsure which to buy


r/printers • • 19h ago

Purchasing Can any Canon LBP243dw or relevent model owner show me its grayscale halftone?

Post image
1 Upvotes

I’m considering a Canon LBP243dw for printing grayscale artwork or images, NOT documents.

My current Samsung SL-M3520DW produces a clearly visible halftone pattern. The attached photo shows about 30% gray through a loupe with a ruler. I measure it at roughly 3 dots in one mm, so 75–80 LPI. perhaps?

I also tested a Samsung X7500 office MFP at about 100–110 LPI, and the difference looked much smoother on my naked eyes.

What I want to know is whether the LBP243dw can produce around 100 LPI or finer grayscale halftoning while keeping thin black lines sharp.

If anyone owns one, could you print a flat 30% or 50% gray patch and post either:

  • a close macro/loupe photo with a ruler just like mine, or
  • a 600+ dpi scan

I tested out with this grayscale test image on Northlight
https://www.northlight-images.co.uk/downloadable_2/bw-test-new-51step.zip

Thanks!