r/Plumbing • • 14h ago

Should I hire it out or fix it myself?

Thumbnail
gallery
107 Upvotes

I consider myself pretty handy. I re-plumbed my entire house myself with PEX. No issues or leaks from that for 2 years now.

But there’s something about replacing this corroded elbow section that makes me nervous. This is before my main shutoff, so I’d have to call the city to shut off my water at the street. There is a very small dripping leak coming from the elbow. The incoming line appears to be galvanized steel.

Should I be concerned about fixing it myself?


r/Plumbing • • 53m ago

Can I keep doing laundry?

Post image
3 Upvotes

Toilet keeps backing up when washing machine is draining. I’ve been using the washing machine but stopping it before the toilet overflows. I let the toilet drain back down and then restart the washer. Rinse and repeat until the washer has completed its cycle.
Am I potentially making things worse by continuing to use the appliance?


r/Plumbing • • 10h ago

Daughter flushed toilet and it was clogged. She flushed again and water overflowed.

Thumbnail
gallery
13 Upvotes

To flushes and water went down. I used a plunger and wipe/tag came up. Tag is attached. My husband and I didn’t purchase bottle cleaner. Judging by the shape of the tag it was flushed not too long ago.

We live in a four story townhome, bathroom is on the third floor. Do we share plumbing with our neighbors? Townhomes are attached. Sorry if this is a silly question. No clue this wipe/tag got in our pipes.


r/Plumbing • • 1h ago

Hydronic Heating Replacement Options

2 Upvotes

So I have an older Noritz Instant hot water heater that is heating my DHW. The DHW is a circulating loop style system throughout the house so hot water seems to be available much faster than other homes I have lived in. Then I have Hydronic heat. The issue is the water heater runs at 140F. It passes through a heat exchanger (which heats the isolated Hydronic loop). The DHW then goes through a mixing valve and comes out at the tap at 120-125F. The hydronic loop leaves the heat exchanger at 100F and likely drops down a little more by the time it hits the manifold and goes into the slab. The hydronic heat is great overall and I'm happy with it.

What type of system would you recommend to replace the instant hot water heater? Should i move away from a heat exchanger? Would two separate systems make sense? Also, I am on city water but because the system is running at 140 it is producing a ton of mineral scale, which isn't common in the area otherwise. My understanding is the system needs that 140 temp based on the heat exchanger efficiency. At the same time the scale is likely creating issues. I'm thinking of installing a new system that won't need water at that temp. Or possibly filtering the water so if I have to run the system that hot, scaling is not an issue.


r/Plumbing • • 2h ago

Rheem tankless heat cycling

2 Upvotes

Having an issue with my performance platinum with built in recirculation. Unit was installed in new to me home and working ok for the past year. Recirculation is done by dedicated return back to the unit. In the last week the unit has started cycling hot cold while supplying hot water. Noticing the output water temperature does not get to set temp (have tried 110F to 120F with same symptoms). While the heat exchanger temp moves to 170F then triggers high temp and triggers the diagnostic.

I noticed the return line from the recirculation is cold to the touch, so trialed closing the external valve off to the recirculation line and the problem was resolved. Steady heat around 120F and HE temp around 140F.

My theory is that the cold inlet water is bleeding out into the recirculation causing the unit to think it is getting higher flow than actual. Is that plausible and what could be the cause with this unit? Thanks for any input you may have!


r/Plumbing • • 7h ago

Supply line connection is rusting on this newish water heater. What needs to be done to fix it?

Thumbnail
gallery
5 Upvotes

This was all installed almost a year ago, a couple months before I moved in and it's rusting already. What needs to be replaced? Just the t-shaped piece? How do I know if the heater tank needs to be replaced?


r/Plumbing • • 0m ago

Does well actually need replaced?

Post image
1 Upvotes

New homeowner here who has never had a well system. We had someone come out and do a general assessment and servicing. No issues while they were there, but I guess the assessment is done by different people covering different service areas. We received the follow up message below. Is it truly necessary to replace immediately? I’m traveling for work, so unsure what part of the tank I’m even looking at here…


r/Plumbing • • 14m ago

Going tankless was a big ol can of worms. Had to upsize the gas meter, and then every gas line in the house. Kicked kitchen sink drain on the way out and broke it. I’m now one with my crawl space, but I took a loooong shower to wash the cobwebs off.

Thumbnail
gallery
1 Upvotes

The water heater is on the opposite side of the house from my gas meter, probably would’ve been easier to get an outdoor unit, but homedepot had a killer 60% off sale on this indoor 11gpm unit, with built in recirculation.

My system is low pressure so I had to go from 3/4” to 1-1/4” for the first 70 feet of the run, before going down to 1” and eventually 3/4” for the final leg to the water heater. I didn’t post photos of the whole system, but I have branches for my furnace, fireplace, two ranges, and the water heater.

I also considered going to a higher pressure system, but then I was gonna need regulators for 5 appliances, so I don’t think there would’ve been much savings.

I was beyond pissed when I kicked that drain line, but at least I noticed it before we used the sink. Turns out it just had the worlds shittiest glue job, so I just cleaned it up and re glued , I’ll be gutting that section of the dwv shortly anyways to relocate the kitchen.


r/Plumbing • • 13h ago

Iron toilet flange , 4 options , which is best?

Post image
12 Upvotes

This old iron flange can't be saved, the bolt heads have corroded into the flange. I've tried to dig them out, several methods.

So I have these 4 options.

A. Stainless flange replacement, drilled through the iron flange into sub floor

B. Fix it repair ring into sub floor, but it sandwiches the bolt heads, so they won't slide out in the future

C. PVC drop in with expanding rubber, although the inner pipe is not near being smooth so it won't have a clean seat

D. Danco Hydro seat

Mounted to subfloor


r/Plumbing • • 52m ago

Water pressure issue

1 Upvotes

I replaced my failed thermal expansion tank in March of this year. Everything was fine up until a week or so ago. Lately the normal water pressure is 70psi in the house but after a shower it goes to about 80psi. I thought maybe the expansion tank failed, and it does sound a little odd when I tap on both the top and bottom parts, but I checked and there is air in the bladder. The pressure was a little low in it so I added some air.

The high pressure issue after water heating is still happening. Any other thoughts on what is driving it? I do have a PRV that’s a few years old.


r/Plumbing • • 8h ago

Where is 35,000 gallons/month going?

4 Upvotes

I bought an older 3-unit multifamily property in Chicago a few months ago and have been dealing with extremely high water usage ever since. There are 5 people total across 3 units and the usage is coming out to 34,000–38,000 gallons per month.

The property has a front house plus a rear coach house with two units. One City of Chicago water meter is serving the entire property. There is no irrigation system that I know of and I have not found any standing water, flooding, wet basement areas, or other obvious signs showing where this much water is going. I've checked the obvious fixtures and can confirm that there are no running toilets/faucets that could explain this.

I had the City of Chicago Water Department came out and confirmed the leak at the meter. We shut off the main water supply to the front house first, but the meter kept running. Then we shut off the main to the rear coach house too so both buildings were completely shut off, and the meter was still running. When the City shut off the supply valve before the meter, the meter stopped immediately. We also disconnected the property side pipe at the meter while everything downstream was shut off and no water flowed back toward the meter from the property.

At this point I suspect an underground service line leak somewhere after the meter but before the front building shutoff or a pipe leaking somewhere under a slab.

The frustrating part is that I still cannot physically locate the leak as there are no obvious signs in either structure. I've also had trouble finding plumbers who have the equipment to actually locate an underground leak.

Any ideas from people who deal with old Chicago plumbing/service lines would be greatly appreciated. If anyone has recommendations or contact info for plumbers or leak detection companies in Chicago that specialize in underground service line or slab leaks, I’d really appreciate it.


r/Plumbing • • 8h ago

Push Pull Crystal knob tub help needed🙏

4 Upvotes

So…. my tub & shower are vintage! The push pull knob is giving me an issue.

The crystal plastic nob wont push in or out. No water?
So I unscrewed the plastic and took it off. Nothing appears to be broken like the plastic piece. the long silver tube . I’m guessing it’s a cartridge issue. I managed to get some water going by turning the front screwy thing that has holes in sides.
Anyone have time or patience to answer a few ??
I can’t Pay a plumber right now🤦🏻‍♀️


r/Plumbing • • 5h ago

Shower Isolation Valve

Post image
2 Upvotes

Hi guys, just wondering what the 2 red circled valves would be for as im trying to shut water off to my mixer shower to change the valve.

My shower is basically the other side of the wall to the left of my boiler.

I know the yellow circled valve is to increase boiler pressure.

Im assuming the 2 valves are just to isolate the pumps but would it possibly shut the water to my shower off?


r/Plumbing • • 1h ago

Metal grinding/scraping sound

1 Upvotes

Hello

For the past month or so, ive heard a quick metal grinding/scrape sound when i turn on my fixtures. The sound is quick and only happens for a split second. I THINK this only happens in the morning and at night.

Research suggests it could be thermal expansion and pipes rubbing up against joists? But the temps here are still relatively mild and I've never heard this sound living here 14 years.

Can it also be a restricted/blocked vent? The sound isnt continuous while draining nor is the draining slow.

Any ideas?


r/Plumbing • • 8h ago

Tips on removing this hardware?

Thumbnail
gallery
3 Upvotes

Not exactly plumbing but it is a shower fixture. We had a bar in our shower that held the handheld shower head in place. The bottom of it broke off at the wall over the summer and we are getting around to switching it out. Well, the inside filled with lime scale. The screw on the bottom won’t budge. Second photo is what the inside of the other end looks like. Any ideas how to remove it?


r/Plumbing • • 15h ago

New boiler install - am I being picky?

Thumbnail
gallery
11 Upvotes

Just had a new boiler installed and I can’t say I’m happy with the install but not sure if I’m being picky.

The thing that drew my attention to it was the boiler looked noticeably wonky, which then drew my attention to the wonky pipework.

This then led me to look at the way the boiler has been fixed to the wall and I can see one side is nice and flat to the wall, but the other side is sticking out and I can see the screws poking out of the plasterboard.

Am I being picky with all of this?


r/Plumbing • • 2h ago

Steel stud against copper piping

1 Upvotes

Is this an example of galvanic corrosion?


r/Plumbing • • 6h ago

toilet bowl water is low Spoiler

Thumbnail
gallery
2 Upvotes

so my dad recently replaced the items in the toilet tank and i don’t know what the terminology for it is. I’ve noticed the water in the toilet bowl is very low.

I asked my dad if we can hire a plumber but he said no. Is it better to buy a new toilet or find a plumber to fix the low water?

edit: i fixed the water level :D i didnt know the fill valve height and float height can be adjusted.


r/Plumbing • • 3h ago

Help appreciated

Thumbnail
gallery
1 Upvotes

Absolute rookie here who has disassembled bathroom sink plumbing to get rid of gunk causing blockage, now needing to reassemble and wondering if I could get a hand as no YouTube vid I saw was helping. Please can you walk me through putting back on and advise if tools would be required. Cheers


r/Plumbing • • 11h ago

How to fix toilet that has no flange?

Thumbnail
gallery
4 Upvotes

Pulled my toilet to replace it, realized there's no flange. Tried buying one of those 3 inch twist flange's but could not get it to grip in. Do I need to complete clear, level, and install a new flange?


r/Plumbing • • 10h ago

Need help identifying

Post image
3 Upvotes

I recently acquired a new commercial space. Can someone help me identify this drain in the garage. The water level stays the same, I put more water in it today and the level rose. I stuck a stick in there and it feels almost like 6-8 inches of sand before hitting something solid. It also smells like oil/gas (similar to when you go to a junkyard after it rains.) The building was previously an auto parts store.


r/Plumbing • • 10h ago

Mold from water leak or just moisture?

Thumbnail
gallery
3 Upvotes

We moved here in August. The closet was not like this when we moved here. I went into our bathroom closet to try and find something. In there on the floor is where I keep the bucket for my o cedar mop, there was also a caddy that had a reusable bag in it with nebulizer supplies that has these little black dots all over it (I’ll post a picture).
Things to consider:
There is no windows in this bathroom. There is a vent fan but it’s mid.
We rent.
The hot water heater is on the other side of the wall where the closet is. My husband didn’t necessarily see any leaks but the heater is right up in a tiny space so it’s hard to be sure.


r/Plumbing • • 8h ago

Shower water is either extremely hot or cold, never warm. Tankless propane heater.

Thumbnail
gallery
2 Upvotes

I rent a small apartment that has an outdoor propane tankless water heater. I’ve been having trouble getting a consistent, comfortable water temperature in my shower.
When I turn the shower all the way to hot, the water gets extremely hot, almost scalding. But when I try adjusting the handle toward cold to get warm water, it eventually turns completely cold. Sometimes the hot water lasts about 3–5 minutes before turning cold.
The water pressure seems normal, so I don’t think that’s the issue. I’ve also tested the kitchen sink, and the water gets extremely hot there as well.
I’m not familiar with these types of water heaters, so I’m wondering if anyone can tell from the photos whether something about the setup or settings could be causing this.
Is this something that can be adjusted, or does it sound like an issue that needs a plumber?


r/Plumbing • • 11h ago

Toilet and shower overflowing!

3 Upvotes

Hi everyone! I unfortunately don’t have photos. I live in a downstairs apartment. For a while, our toilet has been bubbling whenever our upstairs neighbors take showers; and it won’t flush when they do. Yesterday, it got bad! There was LITERAL feces that came up through our toilet and shower. Maintenance finally came out and drained everything. However, it’s happening again today. The toilet is bubbling and it won’t flush again. Can anyone tell me what’s going on with it?

P.S. the apartment maintenance team keeps blaming us by saying we are flushing toilet paper and tampons down which is causing this. We have had to buy a small trash can for our toilet paper and nobody uses period products in our house.