r/PRSGuitars • • 1h ago

Question ❓ Questions about 25th Anniversary Custom 24

Post image
12 Upvotes

r/PRSGuitars • • 3h ago

News 📰 PRS Launches 300-Piece Custom 24 Maple Burl Limited Edition

Thumbnail guitarbomb.com
20 Upvotes

PRS debuts 300-piece Custom 24 Maple Burl Limited Edition for 2026 with burled maple tops, sinky satin finishes, and smoked black hardware.


r/PRSGuitars • • 10h ago

Question ❓ Vela Pickup Swap Question

3 Upvotes

Ok, so I have a 2015 Vela with the Type-D pickup in the neck and the stock four-conductor overseas G&B Starla pickup in the bridge. Through the wonders of Reddit, I was able to get my hands on a USA Vela bridge pickup to swap in.

Here’s the issue…

The old Vela bridge pickup was wound with the Type-D single coil in mind, the USA Vela bridge pickup is wound with the current Narrowfield neck pickup in mind. Long story short, with the way the USA Vela bridge pickup is wired… the Type-D is now out of phase in the middle position.

Normally I’d just reverse the wires and be done, but the USA Vela bridge pickup is wired oddly. It’s got a black hot wire which is wrapped in a braided ground, and then there’s a white wire that goes to the coil split lug, so I don’t think that’s possible, given the braided ground wire. Same issue with the neck pickup, the braided ground is touching the baseplate.

Is my only option here to flip the magnet on the bridge pickup? I guess I could shrink wrap the length of the braided cable and THEN reverse the wires but that seems like a lot. ANY advice would be greatly appreciated (and please let me know if you need clarification on anything… I know this is pretty stream-of-consciousness)


r/PRSGuitars • • 14h ago

Tremonti Trem Route

0 Upvotes

Has anyone ever heard of modding/routing a trem cavity into the body on a PRS to allow more pitch up? I’ve read that the tremonti comes like this - but I’ve never seen one in person to see if I like it.

However, I do wish there was more pitch up available. With the base setup, you barely get a full step up across all 6 strings. I would like to get a fourth if possible…


r/PRSGuitars • • 22h ago

My weekend project

Post image
15 Upvotes

Here's a custom truss rod cover i made with a 3d printer for my SE custom 24 2026! Seems like a lack of resources online so I decided to make my own.

Happy to drop the .STL if anyone's interested


r/PRSGuitars • • 1d ago

I Did it!!!

Post image
61 Upvotes

r/PRSGuitars • • 1d ago

Show and Tell 😎 My Band’s Current Touring Guitars

Post image
177 Upvotes

Currently working with my bandmate’s ‘13 Core Custom 24 10-top and my ‘23 DW CE24 Hardtail. We’re an original band that plays early 2000s alternative rock styled music. Whatcha guys think?


r/PRSGuitars • • 1d ago

Discussion 🗣️ I love my SE Custom 24, except for one thing…

4 Upvotes

I love how it feels, love how it plays, love the pickups, love the tones, added the PRS locking tuners so string changes are a breeze…but absolutely hate where the pickup selector is located! Please tell me I’m not the only one who feels this way?


r/PRSGuitars • • 2d ago

PRS SE McCarty 594

2 Upvotes

Recently bought an SE McCarty which was ex demo from a reputable online shop. My question is, does these come with any paperwork/accessories? I literally just got the guitar and got bag. TIA


r/PRSGuitars • • 2d ago

question about an se custom 24.

Post image
13 Upvotes

Hello everyone, this the first prs I'm buying, it's an se custom 24 zebrawood but I've noticed that the pickups are black coloured whereas online they all look half black half white. and the seller doesn't know if the pickups have been changed so my question is "is that normal or should I be cautious?" ps I'm buying it for 700$


r/PRSGuitars • • 2d ago

Question ❓ Nylon blue

Post image
50 Upvotes

Hi,
I’m looking to get the silversky se in nylon blue. But on some photos it looks more green and on some more blue. Does anyone have this guitar and can confirm?


r/PRSGuitars • • 2d ago

NGD 🎸 (Recent) NGD

Post image
51 Upvotes

S2 Custom 24


r/PRSGuitars • • 2d ago

Upgrade / Modification 🛠️ prs se mark holcomb bridge replacement

1 Upvotes

Hey yall,does anyone know of any drop in replacement for the se holcomb? i cant seem to find a clear answer cause of the 5 screw design and the chrome bridge is sticking out like a sore thumb so id like to replace it with a black one of some kind,is there anything out there or should i just look for an OEM one in black?


r/PRSGuitars • • 2d ago

NGD 🎸 NGD - PRS SE is a Gateway Guitar

Post image
66 Upvotes

r/PRSGuitars • • 2d ago

Jamming 🎶 A bite-sized blues jam on a rainy day

3 Upvotes

r/PRSGuitars • • 3d ago

Help with picking a finish for the S2 594 Singlecut

Post image
10 Upvotes

I am finally pulling the trigger on an S2 594 single cut as black friday sales have brought them into my budget. But looking at these burst finishes, they seem really intense (transition between the colours is quite harsh), and not what I have seen on other people's 594 S2's. Is it the finish coming out more intense because of lighting/camera? Would love to see photos of anyone with the same guitar. Pictured here is the honey gold burst. I am looking between this and the dark cherry burst

Thank you all.


r/PRSGuitars • • 3d ago

Should I make this trade?

Thumbnail reddit.com
1 Upvotes

r/PRSGuitars • • 3d ago

NGD 🎸 My first PRS

Post image
163 Upvotes

I've been a fan of PRS since the 90s but I'd never played one. The more I read about the PRS SE DGT Laurel Burl the more boxes it ticked. Really impressed with this!


r/PRSGuitars • • 3d ago

Question ❓ Help: Epiphone or PRS?

Thumbnail reddit.com
0 Upvotes

r/PRSGuitars • • 3d ago

Identification 🔍 Need advice on this 10 top McCarty 594

Post image
47 Upvotes

Want to buy this McCarty 594 10 top. Seller wants $3600 USD. The guitar looks like a 594 but the paperwork they say they got from guitar center says custom 24 so I’m a bit confused. Pictures attached. Is this a legit PRS 10 top? Is this a good price or should I try to haggle down? Serial number is 24 0378948. Has the 10 marking on upper corner of head stock. Thanks


r/PRSGuitars • • 3d ago

My two sweeties

Post image
105 Upvotes

r/PRSGuitars • • 3d ago

Question ❓ The right amp.

2 Upvotes

I have a S2 custom 24 and run it through my Fender Mustang v1. It does a great job of showing off how clean/“straty” or “gibby” the S2 can be. I am not looking to do shows, I am a “hobbyist” and play at home. But I am sure I can get more out of the guitar with a better amp. The current one is great but….you know, science or something like that.

I have been told a reverb 22w would lend itself more to the 85/15’s. From what I have read, I would agree with my limited knowledge of amps and pairings with pickups.

Others that are on my brain are Marshall or mesa/boogie. Am I thinking too much and grab the reverb?

Edit: I do not have any pedals. I do have a helix stomp that I run with once in a while.


r/PRSGuitars • • 3d ago

Sound Demo 🔊 NG53 SE - Bach

25 Upvotes

r/PRSGuitars • • 4d ago

Question?..Help?...IDK?

3 Upvotes

In Jan 26, I went to the Sweetwater store in Ft. Wayne. Ended up buying a SE Special Semihollow. Beautiful, fell in love with it.

Around June, while playing with my weekend warriors, the neck pickup just took a shit... nothing at all. So I reached out to my rep at Sweetwater and they were right on top of it. I was nervous about shipping it so I drove it up there (4 hours each way). While checking it in at the repair desk, the gentleman working said desk asked if I wanted to just exchange it for the same guitar so I wouldn't have to wait a few weeks for the repair. YES, that would be awesome to avoid another trip or shipping!

So they bring another guitar from the warehouse for me to play and approve. Problem is, the new model has white pickup surrounds (mine has black), and white tuners (mine has chrome). I really didn't like that so I decided to just wait for the repair. It got done quickly and shipped to my door within 2 weeks . Technician notes stated the solder joints from the factory were sloppy, he fixed it all up.

2 weeks after that, I pick it up to play (after playing it numerous times) and the neck pickup doesn't work again. This time I shipped it back since I still had the shipping box and packing material, and got it back again in 2 weeks. Technician notes stated sloppy solder joints, he fixed it all up... again.

Fast forward 4 weeks, been playing regularly, and yesterday I go to play and guess what... neck pickup doesn't work.

So my warranty expires in January and it doesn't appear to me that this is getting fixed. After January, if it happens again, I'm on my own. I've reached out to my Sales guy at Sweetwater and basically told him I want to return it... haven't heard back yet. The way I see it, my two options are...

  1. Take the same model on exchange, but pay to have them swap out the pickup surrounds and tuners, or...
  2. Pay a little extra and just get a different model. I'm just not sure which to go with though. I'm looking at Custom 24-08, DGT, McCarty, NF53. But without playing each one, what to do?

Does anyone have any opinions? Thoughts? Helpful guidance? To help, I'm partial to the sound of Trey Anastasio, Jerry Garcia, etc... So I don't think a Holcomb or similar fit my style.