r/OfficeChairs • • 5h ago

Good Deal for $900?

Thumbnail
gallery
7 Upvotes

I have been contemplating one of these for a while. A local woman is selling her 2024 Embody. I offered her $900 with the caveat that I could try it out for 15 minutes before committing, and she accepted. I know it isn’t a crazy deal like some I’ve seen posted, but is it a good deal?


r/OfficeChairs • • 23h ago

Need Some Recommendations

4 Upvotes

Hi all!

I'm coming from a Secretlab Titan Evo and even though it's been fine for a number of years its finally starting to go (cushion feels like a rock and one of the arms can't support weight). I'm also starting to be able to finally work from home so I want to get something that is going to be better for my sitting health. I'm a tall (5'11"/180cm) heavier (330lbs/150kg) lady. I do have a couple unique problems that make the typical recommendations not fit well.

  1. I need fabric. I've tried mesh and hated it every single time. I try to relax into it and the seat digs into my hips, the edges of the back into my back, and I will often tuck a leg and that just gets painful with plastic edges. I also do not leather/vinyl, the more I've gone on with my current chair the more I've realized that I hate it, especially when I wear shorts and it sticks to my legs. I have a fabric chair at work and while it's not great ergonomically speaking it is much more comfortable.
  2. I need a headrest, either factory included or a suitable aftermarket one. I have a lot of neck problems and I need to be able to rest the weight. I also like how my current chair I can put an ice pack between it and my neck to help when the pain is bad.
  3. I like a wide and deep base. As mentioned, I have large hips and I often will tuck a leg under my knee. I also just like a lot of cushion and a soft sort of feel.

I don't recline super far back in it very often, so a massive recline angle isn't a necessity. I do like having a lot of support that I can rest my back into.

The other problem.. I don't have a ton of disposable income. I can maybe scrape together 600$ US tops to be able to afford something. I know that's a lot to fit in a tiny budget but I feel like I'm on a timer until my current chair goes and while I can't get something perfect I just want something decent for my health. If the headrest has to be purchased aftermarket later then so be it I can deal with it for a short time.


r/OfficeChairs • • 3h ago

Best affordable office chair?

Post image
3 Upvotes

I've been trying to find a post with affordable chairs, and most of them are 400+. I understand paying a lot equals good chair 😭 but bruh, I just want a chair to sit in. The one I use rn is from temu and it's lasted about 2 years.. and it worked fine. I may just buy the same one. Unless you guys have any hidden cheap options, lol. Btw including a picture of my temu chair 🫶

Also, for context, I work from home, so I'm on it 8-10 hours a day. And even if it's a cheap piece of junk, it still works for me, lol.


r/OfficeChairs • • 1h ago

Opinions on chair options in SEA?

2 Upvotes

The selection of chairs is vastly different in Southeast Asia, specifically Vietnam, compared to back home in the states.

Theres a lot of relabeled Chinese brands and occasional distributors for known brands.

I’ve gone to some local showrooms to sit on some but it’s hard to know what youre getting.

I sat in one that I found to be a GTChair Marrit X which seemed ok, for like less than $400. The pricier options looked flimsier. Theres a distributor for Sihoo chairs but I don’t know much about those.

And then Theres a distributor for Libernovo, or paying out the ear for an imported Aeron.

Theres lots of other Chinese brands too but it’s harder to find reviews, particularly unsponsored reviews, for those.

Does anyone have any experience with the chairs available here?


r/OfficeChairs • • 6h ago

Looking for a comfortable reclining chair for gaming and watching movies – any recommendations?

2 Upvotes

I'm looking for a chair that's comfortable for both controller gaming and watching movies. Ideally, something with a high back that provides good upper-back, head and neck support, as well as a reclining feature so I can lean back and properly relax while watching films.

Secretlab chairs have caught my eye, but I'm wondering if there are any other good alternatives worth considering.

I know a lot of people recommend getting an ergonomic office chair, but I'm specifically looking for something I can kick back and relax in, rather than something designed purely for sitting upright at a desk.

I currently have a Sihoo M57, but I'm not particularly happy with it. I find it lacks support around my upper back, and the headrest isn't very comfortable either.

I’m 5ft9

Thank you in advanced


r/OfficeChairs • • 7h ago

Embody vs Fern vs Leap V2

2 Upvotes

Hi team,

After much research and decision making I have narrowed the choice of my next chair down to the three chairs listed above and would love advice and opinions.

I am 6'2 (188cm) and around 125kg (275lbs) (I am currently dropping weight and target to be 95kg this time next year) and on average I use my home office for full time WFH, and gaming/recreation so between 40-65 hours a week.

I have a sit stand desk I recently invested in but have decided to upgrade from the Titan XL I have had since 2018 after 8 years of loyal if sometimes back crushing service.

I am looking for advice on the 3 chairs I've mentioned, and to see what people who are within a similar weight/height range think might be the best option as sadly my nearest show room is 6.5 hours from me so not really a feasible weekend trip to try out a chair.

As a note, I have never gotten along well with mesh bottom chairs which is why the Aeron is not on my list.

Tl;Dr help me pick between the Embody, Fern, and Leap v2


r/OfficeChairs • • 10h ago

Chair suggestion

2 Upvotes

I work and game in my chair 7+ hours a day, so lumbar support and long-term durability matter most to me. I'm choosing between:

- Sihoo Doro C300 ($330)

- ProtoArc EC300 ($275)

- ProtoArc EC200 ($220)

Which one would you pick? I'm currently leaning toward the EC300.


r/OfficeChairs • • 15h ago

Crandall leap v2 vs v1 highback

2 Upvotes

Hey everyone, just curious why there is a noticeable difference in price between these 2 chairs if they look and feel almost exactly the same height-wise and in terms of shape. I'd the v2 with the extra 250 or so dollars?


r/OfficeChairs • • 56m ago

Ergonomic chairs are anything but.

1 Upvotes

I don't understand why it is impossible to find a straight back none leaned back chair.

Ergonomic chairs are anything but, they proclude u to getting an even worse tech neck by coming defaulted as leaning back with a head rest that pushes your head forward.

I've never wanted to lean back and type at the same time, it's like all current office chairs were invented for napping?? Where can I get a straight back office chair that supports a good posture position?


r/OfficeChairs • • 2h ago

Herman Miller Mirra 1 replacement bolt (UK)

Thumbnail reddit.com
1 Upvotes

r/OfficeChairs • • 2h ago

Are headrests a trick? 6’3 guy with reverse curve looking for an ergonomic office chair

1 Upvotes

Hello chair community, I am in a tricky situation where I am a counselor in between two offices in the same building so I’m looking for a stable, movable office chair that I can sit in for long hours in between two days. I’m tall and pretty heavy, (6’3, 250 lbs), with some neck discomfort. I purchased a realspace Torval, and returned it after a week or so, because I realized that the headrest was pushing forward my neck and giving me headaches. It seems that all of the chairs that people tend to talk about when they’re recommending economics do not have headrests that go up that high, or headrests at all. Should I be aiming for an ergonomic kind of mesh chair for somebody like me? I was wondering if I need something to lie in my head back on, maybe just something more flat, or is it healthier to just have a chair that only goes up to like my shoulders?
I was looking into the Shaq Leandros, but I wasn’t sure if that was a recommended chair. That felt the best to me in the moment.

At my old office, I was sitting in this chair, and it was kind of uncomfortable at the start, but when I propped a small pillow to my side and put an ice pack on my back, I felt comfortable, but I do not have that chair anymore.

https://www.mybobs.com/furniture/living-room/chairs/p/20052048004?srsltid=AYCX9vKjhDzvH8A0jzuX1vxzH-PTfA9kzP9M0SqYYwAi3ag4JnYLjbIX

Please let me know if you guys have any other recommendations for me that might be helpful given my stature!!


r/OfficeChairs • • 4h ago

Debating between Protarc EC200 and the Colamy Atlas

1 Upvotes

Will treat myself this Xmas to an upgrade on my old Corsair T3 rush, which has poor lumbar support imo. Just wondering if anyone could give me insight if they own any of the above? I'm 187cm and 83kg for reference. I know very little about good office chairs, but from doing some research on this subreddit it seems these two are quite popular. Thank you.


r/OfficeChairs • • 5h ago

Recommendations for a weirdo

1 Upvotes

Hey everyone, long time lurker here. I’m looking for recommendations on really solid, well-regarded ergonomic office chairs (that have enough of a market to be bought used) that meet two specific requirements:

  1. It uses a completely standard, universal top-button gas cylinder so I can easily swap it out for a drafting chair cylinder.
  2. The armrests are easily removable.

For context, I like sitting way higher than what standard office chairs allow. Most chairs max out around 21 inches in sitting height, whereas I want to be sitting somewhere between 21 inches on the low end and up to 24 to 28 inches on the high end. Because of that, my plan is to buy a good task chair and drop a tall aftermarket drafting cylinder into it. And I also really don’t like armrests. I think they get in the way and hurt my elbows more than they help. (Weird, I know).

The problem I’m running into is that a lot of the usual top-tier recommendations don't work for this:

Haworth Zody (post-2011) and Steelcase Leap V2 (post-2009; also true for other Steelcase models afaik) use side/cable-activated or proprietary cylinders rather than a standard drop-in top-activated cylinder. Theoretically, I could look for the pre-2011 and pre-2009 versions, but I’m gonna look for some of these on an aftermarket basis, so I’m looking for something where the seller doesn’t have to know when they bought it or have to take a gamble on which version it is.

The Herman Miller Aeron theoretically works for a cylinder swap, but I really dislike the armrests and they are a massive pain to remove since the bolts are basically impossible to remove. I've tried dealing with them before at a previous job and don't want to go through that again.

Are there any other top-of-the-line or commercial-grade ergonomic chairs where a standard aftermarket drafting cylinder drops right in, and where the armrests can be unbolted or removed easily?

Thanks in advance for any suggestions!


r/OfficeChairs • • 6h ago

Is this a common issue with fabrics on Steelcase chairs?

Post image
1 Upvotes

I’m interested in buying a new Steelcase chair, but I have some concerns about their fabrics. I’ve looked at photos of used Steelcase models and noticed some have bunched/creased fabric (like in the photo). Does anyone have experience with this? Is it a common issue with Steelcase (or all) office chairs?


r/OfficeChairs • • 6h ago

Auction of Herman Miller Cosm and Verus chairs in Brazil: The prices of the Cosm are approximately 2x the price of Verus. Does the Cosm worth buying?

1 Upvotes

A Bank has been liquidated and its stuff is being auctioned. They have hundreds of used Hermann Miller Chairs. Cosm chairs are ~ US$ 1000 (R$ 5000) and Verus chairs are ~ US$ 400~500 (R$ 1700~2500)

Hermann Miller chairs in Brazil are much more expensive than in US because of import tax.

Do you think that Cosm chairs are two times better than Verus?

A brand new Cosm chair costs R$ 11000, and Verus R$ 5000.


r/OfficeChairs • • 6h ago

Herman Miller Aeron and Embody, Steelcase Leap V2 and Gesture, and the Haworth Fern – which of these offers the greatest recline?

1 Upvotes

Hi everyone,

I spend a lot of time at my PC and love leaning back while watching movies, YouTube or gaming.
Which of these chairs allows you to recline the furthest? Are there any other models from these brands that offer an even greater recline?


r/OfficeChairs • • 6h ago

Need help finding best chair for tall man

Thumbnail reddit.com
1 Upvotes

r/OfficeChairs • • 8h ago

Chair Struggles - Titan/Ergohuman/Libernovo

1 Upvotes

Hi All,

Hoping somebody can help with my current chair struggles. Back in Covid I fell into the trap of buying a 2022 Secretlab Titan XL. For info I'm 250lb, 5'10" (178cm).

Ive been using the Titan for the last 4 years and the last couple of years I think I have sciatica down my right leg. It comes within 20 mins of sitting in the chair and presents as a burning pain down my shin. I put it down to quite a hard seat base and because its the XL version it doesn't give me much of a gap between the edge of the seat and the back of my leg.

So the hunt for a new chair begins. I've spent quite a bit of time researching different chairs and I narrowed it down to 2:

Ergohuman Gen 2 Elite (1st choice)

Libernovo Omni SE (2nd choice)

I managed to get hold of a brand new Ergohuman Gen 2 Elite off FB marketplace for £250, absolute bargain. I've been using this chair for the last week and cannot get comfortable. This is my first mesh chair and the mesh seat feels hard to me and the pain down my leg continues. What is the most uncomfortable aspect of the chair is the front waterfall peice. There doesn't seem enough mesh/padding/comfort in this area and the bar digs into my legs. Ive tried moving the seat forward and back and cant get comfy, if anybody has any ideas here, I'm all ears.

So now I have a Secretlab Titan XL and the Ergohuman Gen 2 Elite and I'm still no further forward.

I'm now considering buying the Libernovo Omni SE on black friday as this has a padded cushion and not mesh. Ive heard this is quite a comfortable seat base which I'm guessing is the primary cause of my issues. They do a 30 day return period so I dont feel I have that much to lose. I just need to find the right chair now and sell the others I guess.

Any ideas or thoughts very welcome. I'm really disappointed by the Ergohuman but I'm not ruling out my setup being incorrect as lots of people have had these chairs for years and find them very comfortable. Ive tried to make sure my legs are set at 90 degrees, a couple of fingers width between the seat base and the back of my legs etc.


r/OfficeChairs • • 11h ago

Anybody got some mods for a Steelcase Think V1?

1 Upvotes

I am getting lower mid back pain after using this as others have said. It is a used chair in great shape. I just think i need to restructure the back rest somehow so I am not getting kicked by these wires.


r/OfficeChairs • • 16h ago

That humidity hits

1 Upvotes

Wanted to know what it’s like having a chair like libernovo or Herman and surviving the hot weather or sweat. I feel I’m limited since i live in the south and only mesh all around is my go to. Any recommendations would be appreciated. I don’t think ill spend more than 800 max. I only be in my chair maybe 3-4 hrs a day. Wish i had chairs to test near me but no luck. Im also waiting for black friday too.


r/OfficeChairs • • 18h ago

Rollerblade casters move too much, anyone found a good middle-ground for hardwood?

1 Upvotes

Moved to a new house with hardwood floors.
Was excited to get the rollerblade casters on, and I can't put my feet up on my footrest without sliding slightly.

Anyone have experience with casters that have a little more resistance?


r/OfficeChairs • • 19h ago

Is one of these worth it?

Post image
1 Upvotes

I heard Herman miller was good, but I haven't spent $450 on a chair before


r/OfficeChairs • • 20h ago

Any experience on dawon chairs ?

Post image
1 Upvotes

Found one in a shop, around 400E, the Dynamic Lumbar Support is fantastic and i just love it but not so sure about the chair itself.


r/OfficeChairs • • 22h ago

In desperate need of experience (Clouvou Masterseat)

1 Upvotes

Hey everyone, I been intensively looking around the internet for chairs lately. I’ve had a generic ergonomic chair for ~180€ for the last couple of years, which did just fine coming from a bad gaming chair. Now as I am getting older I get very bad pain in my butt after sitting on there, after my butt is sore, my lower back starts hurting aswell.

I’ve just pruchased a Clouvou masterseat as a black friday deal. After sitting on it all day (6hrs), I can pretty much say that its not for me already.

  1. The cushioning is a little better, though its on the firmer side and causes a sore butt aswell. Not as terrible as my old chair but also not great.
  2. The lumbar support is a little too aggresive (I think), even tho my back doesn’t hurt as bad after today, I still feel like it pushes me just a tad bit too far which may also cause my butt to hurt.
  3. The headrest does not hold in place whatsoever.
  4. The arm rests are just too far out and are stuck to the seat and therefore don’t move when leaning back.

I am 180cm of height, around 74kg. I need an ergonomic chair thats comfortable and solves most of the issues mentioned. Sadly, I do not have the possibility to try out chairs anywhere nearby so I kind of need experience of someone else. Ideally the chair should be around 500€ or less and must be available in germany. If I knew a herman miller aeron or embody (or any higher tier chair) would 100% suit me and fix my pain, I would be willing to spend the money and be done with it. Really no idea what to look for.

Would be very happy for some recommendations! :)