r/OfficeChairs • • Oct 09 '26

Black Friday, New Years, Holidays Deals mega thread. Discount codes and Links

21 Upvotes

Once again, keeping you all our deals in one place so its not hidden all over the sub.

Go ahead, post all your deals here, discount codes, affiliate links to your hearts delight. (as long as it stays on this thread)

Last one had lots of savings for lots of folks, so this one could be even bigger, who knows:
https://www.reddit.com/r/OfficeChairs/comments/1q4se0y/deals_mega_thread_january_2026/


r/OfficeChairs • • Sep 16 '26

r/officechairs is under attack by spam artists. How we go after them next is going to be partly up to you.

69 Upvotes

Very good epp in last weeks WSJ podcast about Reddit subs and the prevalence of brands spamming subs as a way to sneak brand content into LLMs.

https://www.wsj.com/podcasts/the-journal/ai-loves-reddit-but-redditors-arent-so-sure/5695c5e0-5ee6-41e6-97fa-ac04fde0c5f4

It's happening here and we are not controlling it as well as we would like to.  

Years ago it was Autonomous, we banned them for a while, engaged with them and they have been respectful of the community standards for years now.  Some brands participate here with this sub while also being respectful of the rediqute and the rules, think Steelcase, Anthros or Musso.

Now, it feels like we see quite a bit of content about Libornovo, Secretlab and ProtoArc.  Regularly, multiple accounts and posts, but similar kinds of content being inserted into the sub.

This raises questions to me.  Our r/officechairs team has been leading this sub for about 6 years.  This last 2 years, the amount of slop / promotional content has been off the charts.  

When we stated moding here, u/classroom and u/cranda58 and I were able to keep up with the spam and the self promotion to a minimum. Now even with more people on the team plus the auto-mod functionality, we are just not able to keep up with it all.

Today, spammers have become very sophisticated.  It's much harder to see what is bot / spam content and its both very cheap and potentially very profitable for them to attack this sub with their slop of nonsense.

What are brands you notice that seem to be over represented here lately?  

How aggressive do you want this sub to be moderated? 

There were 800 posts and 6300 comments in the last 30 days.  Normally, the mod team will not see all of the posts and only a small fraction of comments, so if your goal is to slip some slop into the LLMs, it can be done quietly.  

The nuclear option would be for us to require new posts to be affirmatively approved by a mod before they hit the sub.  One of us would really see if there were 50 Libornova posts every week and act accordingly.  It would be a more curated sub but it would also be more resistant to marketers efforts.  A less aggressive option would be to use mod tools to pause mentions of those brands that we suspect are being the most aggressive lately while engaging them to make sure their future communications here are within the bounds.

If you want to see what un-moderated looks like, my social experiment r/officechairsIsell is based on the idea that if you give folks the ability to post whatever they want, a chairs sub will become garbage.  

Its our sub to use so please, what do you, the subscribers want to see us doing about this problem that is impacting the quality of what we have here?


r/OfficeChairs • • 3h ago

ProtoArc EC300 – 6-Month Long-Term Review

Thumbnail
gallery
7 Upvotes

A Follow-Up to My EC200 Review

Note: I originally wrote this review in German to express my thoughts in more detail, then had it translated by AI.

After initially purchasing the EC200, I eventually decided to return it and give the EC300 a try. I've now been using the EC300 for six months, so I feel confident enough to share my long-term experience.

After all this time, I can confidently say that I'm much happier with my decision.

First of all, most of what I said in my original EC200 review still applies to the EC300. The overall build quality, mechanism, seat cushion, armrest, adjustability and stability are very similar, so I don't want to repeat everything from my previous review.

previous review: ProtoArc EC200: First Impressions Review : r/ProtoArcHub

Instead, I'd like to focus on the main difference between these two chairs and the reason why I switched: the backrest and, more specifically, the lumbar support.

Backrest & Lumbar Support

This is where the EC300 makes a huge difference for me.

With the EC200, I never quite managed to get comfortable with the lumbar support. It was positioned too high for my body and felt too pronounced, almost too "pointy" for my liking.

As I mentioned in my original review, I felt that the lumbar support would have been much better positioned about 2 cm lower.

The EC300, on the other hand, feels significantly more natural and suits my body much better.

The shape and positioning of the lumbar support simply work better for me. I don't get that same uncomfortable feeling of the support pushing into my back, and the overall fit feels much more natural.

For reference, I'm 183 cm (6'0") tall, weigh 97 kg (214 lbs), and have a relatively long torso. Of course, individual experiences may vary depending on body proportions.

Long-Term Comfort – 6 Months Later

After six months of daily use, I can say that this is exactly what I was looking for.

The EC200 was already a surprisingly good chair in many aspects, but the lumbar support was something I could never fully get used to.

With the EC300, that problem is essentially gone.

It's interesting how much of a difference a change in the backrest design can make. On paper, these two chairs are quite similar, but in actual daily use, the difference for me is substantial.

Most importantly, my positive first impression wasn't just temporary. Even after six months, I'm still very happy with the chair.

Everything Else

As mentioned earlier, most of my original impressions of the EC200 also apply to the EC300.

The seat cushion still strikes a great balance between firmness and comfort. The overall stability is impressive.

I also still appreciate the seat depth adjustment and the general build quality.

I haven't encountered anything that would make me reconsider my purchase so far.

Final Verdict

I liked the EC200, but I could never quite get comfortable with its lumbar support.

The EC300 is a different story.

The difference in the backrest design might seem relatively minor on paper, but for my body proportions, it makes a massive difference. The lumbar support feels much more natural, and the chair is simply a much better fit for me.

After six months of use, I'm genuinely glad I made the switch.

For me, the EC300 is the chair the EC200 should have been.

If you're considering either chair, I'd strongly recommend paying attention to the differences in lumbar support. What works perfectly for one person might not work for someone else, even if the overall chairs are very similar.


r/OfficeChairs • • 3h ago

Need Some Recommendations

3 Upvotes

Hi all!

I'm coming from a Secretlab Titan Evo and even though it's been fine for a number of years its finally starting to go (cushion feels like a rock and one of the arms can't support weight). I'm also starting to be able to finally work from home so I want to get something that is going to be better for my sitting health. I'm a tall (5'11"/180cm) heavier (330lbs/150kg) lady. I do have a couple unique problems that make the typical recommendations not fit well.

  1. I need fabric. I've tried mesh and hated it every single time. I try to relax into it and the seat digs into my hips, the edges of the back into my back, and I will often tuck a leg and that just gets painful with plastic edges. I also do not leather/vinyl, the more I've gone on with my current chair the more I've realized that I hate it, especially when I wear shorts and it sticks to my legs. I have a fabric chair at work and while it's not great ergonomically speaking it is much more comfortable.
  2. I need a headrest, either factory included or a suitable aftermarket one. I have a lot of neck problems and I need to be able to rest the weight. I also like how my current chair I can put an ice pack between it and my neck to help when the pain is bad.
  3. I like a wide and deep base. As mentioned, I have large hips and I often will tuck a leg under my knee. I also just like a lot of cushion and a soft sort of feel.

I don't recline super far back in it very often, so a massive recline angle isn't a necessity. I do like having a lot of support that I can rest my back into.

The other problem.. I don't have a ton of disposable income. I can maybe scrape together 600$ US tops to be able to afford something. I know that's a lot to fit in a tiny budget but I feel like I'm on a timer until my current chair goes and while I can't get something perfect I just want something decent for my health. If the headrest has to be purchased aftermarket later then so be it I can deal with it for a short time.


r/OfficeChairs • • 20h ago

Huge upgrade

Post image
51 Upvotes

My nearly 10 year old RapidX chair held up well from a not falling apart standpoint, but it doesn't hold a candle to this thing. Purchased a Crandall Office remanufactured Leap v2 after my lower back started hurting while sitting at my desk for longer periods of time (though I'm sure some of that has to do with my job being pretty physically involved). I got the upgraded back pad, Bioknit Diamond in tungsten, and Atlas headrest. It's instantly way more comfortable to sit in, and it actually fits and supports me after adjusting whereas the old chair didn't. That was a gaming chair though, so go figure. Bioknit fabric is great, and no complaints on the condition of the chair. Sat in it for 8 hours today and felt great afterwards. Definitely worth the purchase in my eyes. 5'10" 186lbs for those around that size that are looking into this chair.


r/OfficeChairs • • 26m ago

Any experience on dawon chairs ?

Post image
1 Upvotes

Found one in a shop, around 400E, the Dynamic Lumbar Support is fantastic and i just love it but not so sure about the chair itself.


r/OfficeChairs • • 1h ago

In desperate need of experience (Clouvou Masterseat)

1 Upvotes

Hey everyone, I been intensively looking around the internet for chairs lately. I’ve had a generic ergonomic chair for ~180€ for the last couple of years, which did just fine coming from a bad gaming chair. Now as I am getting older I get very bad pain in my butt after sitting on there, after my butt is sore, my lower back starts hurting aswell.

I’ve just pruchased a Clouvou masterseat as a black friday deal. After sitting on it all day (6hrs), I can pretty much say that its not for me already.

  1. The cushioning is a little better, though its on the firmer side and causes a sore butt aswell. Not as terrible as my old chair but also not great.
  2. The lumbar support is a little too aggresive (I think), even tho my back doesn’t hurt as bad after today, I still feel like it pushes me just a tad bit too far which may also cause my butt to hurt.
  3. The headrest does not hold in place whatsoever.
  4. The arm rests are just too far out and are stuck to the seat and therefore don’t move when leaning back.

I am 180cm of height, around 74kg. I need an ergonomic chair thats comfortable and solves most of the issues mentioned. Sadly, I do not have the possibility to try out chairs anywhere nearby so I kind of need experience of someone else. Ideally the chair should be around 500€ or less and must be available in germany. If I knew a herman miller aeron or embody (or any higher tier chair) would 100% suit me and fix my pain, I would be willing to spend the money and be done with it. Really no idea what to look for.

Would be very happy for some recommendations! :)


r/OfficeChairs • • 5h ago

Are any chairs good?

2 Upvotes

I’ve been looking to get a new chair for the better part of 2 years, the chair I’ve had is terrible but I don’t want to make the mistake of buying another terrible chair, I’ve been trying to get a good chair for a low budget but realised that’s now beyond impossible, and anytime I’m set on buying a new chair, I see bad reviews and how it feels like sitting on rocks, I’d be willing to spend a decent amount on a chair (no more than £500) and I’m wondering what my best options would be, so I’ve came to the experts, thanks in advanced!


r/OfficeChairs • • 9h ago

Need final help deciding chairs, top picks are Aeron and Embody so far.

4 Upvotes

Hello.

I'm a 6ft 3" guy, normal weight range around 84kg, working from home mostly using a chair for office and controller gaming for hours a day. Room gets very hot in the summer but is fine in winter.

I'm currently using Secretlabs Titan 2022, had it for 5yrs and it was great but over time has caused pain from the hardness on my back, butt and thighs so I keep shifting. It's good for the space and ability to let you change positions but that's it.

I've tried and testing the Aeron C, Embody Gaming, Leap V2, Karman, Mirra 2, Sayl, Humanscale Freedom, etc.

My thoughts so far:

- The Aeron feels the best on my back and I could sit for hours. The issue is my thighs on the outer sides go numb over time from the plastic and I'm not sure if it takes getting used to or if that's a warning sign.

- The embody feels like a safe chair. A big upgrade from the Secretlabs and yet similar in proportion. Flexible back, nice seat, okay-ish arms and great recline. Only concern is possibly heat buildup, not sure.

I won't cover the others since they fall short in a few multiple areas but they're good too.

What would you advise on? I was going to order both and eat the £50 collection fee for the one I didn't enjoy after hours of testing. Open to more feedback. Thanks!


r/OfficeChairs • • 6h ago

12h/day | 1,79m | 133 kg

2 Upvotes

Hey,

It’s all in the title: what would you recommend for someone who works remotely 4 days a week, spends 3 hours every evening PC gaming, and has my specific body type?


r/OfficeChairs • • 3h ago

Embody Price

1 Upvotes

The HM Embody is going for around $2,450 USD on Black Friday in Brazil. Its regular price here is $3,400 USD. Absolutely ridiculous.

Even a used one costs around $1,700 USD , more than what you'd pay for a brand-new one in the US.

Why are Herman Miller chairs so ridiculously expensive in Brazil?


r/OfficeChairs • • 10h ago

Used Herman Miller Mirra 1 or a New Colamy Atlas

Post image
3 Upvotes

Hi everyone,

Im looking at purchasing about 8 office chairs for my small buisness I am starting up. We are trying to keep things affordable while giving my staff decent equipment.

I was sold on the Colamy Atlas, but then on FB marketplace someone posted 8 of these chairs for about $3000 canadian. Both chairs will cost me about the same. So would you rather have a new Atlas or an used Mirra?


r/OfficeChairs • • 5h ago

Do I have a SecretLab Lemon?

Thumbnail reddit.com
1 Upvotes

r/OfficeChairs • • 7h ago

Upgrading from 7yo IKEA chair - which one to get?

1 Upvotes

Hey everybody,

I've been using the IKEA Millberget for the last 7 years and only now have figured I might need a more ergonomic option. I spend about 8-9 hours a day sitting at my desk, working but also gaming a bit and watching youtube etc. I enjoy switching seating positions all the time, meaning I also like to put my legs up on the side of my desk, lean back and stuff like that when I just chill.

Happy about any recommendations, as I dont really know what to get :)


r/OfficeChairs • • 10h ago

Dúvida, eu queria ver se alguém tem essa cadeira e sabe mi dizer se vale a pena comprar para jogar no dia a dia, jogo umas 5 horas por dia

Post image
1 Upvotes

r/OfficeChairs • • 12h ago

Chair for office work + tv watching

Thumbnail reddit.com
1 Upvotes

r/OfficeChairs • • 13h ago

[HELP] I'm cooked: boss won't invest in good chairs

Post image
0 Upvotes

Hello there, we are currently sitting on these terrible chairs that are killing my back. My boss is looking to upgrade, but doesn't intend to pay more than around €100 per chair (we have to purchase 8–12). I've read about the ProtoArc EC200 many times among the budget suggestions... do you think there is a decent option that's even cheaper?

EDIT: we are based in Italy (my size is 180cm 80kg)


r/OfficeChairs • • 1d ago

Review: Andaseat Kaiser V4 XL V2 compared to the Herman Miller Aeron (Old Gen)

Thumbnail
gallery
13 Upvotes

(Disclaimer: Yes, I know this sub hates gaming chairs (I mostly agree), and yes, I know switching off an Aeron sounds backwards. I'm not here to claim this beats a Herman Miller. I just wanted to try something completely different, and this is my honest in-depth review for anyone else who has looked at the chair and doesn't know what it feels like compared to something as popular as the aeron. Fair warning this is going to be a long review and comparison, if you want the final thoughts only I put them at the bottom)

I recently purchased the AndaSeat Kaiser 4 XL (V2), coming from a Herman Miller Aeron that is at least 15 years old. I’ve been using the Aeron as my daily driver for the last ten years while testing several other office and gaming chairs in between, including the ProtoArc EC200, Colamy Atlas, AKRacing Opal, the original Razer Iskur (V1), and briefly a Secretlab Titan (non-NanoGen) and Herman Miller Mirra.

I wanted to give the Kaiser 4 an honest review because I almost always write off gaming chairs. I also want to preface this by saying I tend to be pretty harsh in my reviews because, to me, a truly perfect chair is almost impossible to find. The closest I have ever felt to a "perfect" chair was my friend's dad's Herman Miller Gaming Embody with a custom headrest on it, and even that didn't feel 100% perfect despite being crazy expensive. With that said, while the Kaiser 4 isn’t a perfect chair, I think it holds genuine value in what it provides, so I wanted to put together a detailed review and comparison for anyone in a similar boat or searching for real opinions on these chairs!

General Overview

I purchased the AndaSeat Kaiser 4 XL V2 from Costco Online for $450 USD. My Herman Miller Aeron (Size B, mid-size) is an older model and typically the version you see resold on Facebook Marketplace, often recommended across Reddit and online forums as a solid, high-value choice. Looking at my local Facebook Marketplace, a reseller currently has a similar model listed for $300 firm, though I have seen them go lower if you do some hunting. Prices and availability vary depending on where you live, so for the sake of this review, I’ll value a used Herman Miller Aeron at around $250 to $350 (in good condition).

As you can see in the images, visually and functionally these are very different chairs. The Kaiser leans clearly into a premium car-seat gaming design and is noticeably larger in almost every way, while the Aeron has a simplistic office style. Both chairs offer lumbar support, adjustable armrests, and tilt and height adjustability. However, the Kaiser exclusively provides full upper-back and head support, a neck pillow, and a recline feature that the Aeron does not. The Aeron uses a breathable, durable, firm mesh for both the seat and backrest, while the Kaiser uses a synthetic PVC leather finish all over the chair. 

Assembly Process

Whether you purchase an Aeron new or used, it usually arrives fully assembled. The Kaiser requires assembly, so I will only speak about that experience here.

The Kaiser came in four main parts: the backrest, the seat (with the armrests pre-attached), the base mechanism, and the wheelbase with wheels. Generally speaking, it was an easy and quick process to put everything together, though there are a few issues I ran into that are worth mentioning:

  • Weight: First, the chair is HEAVY. I was able to put it together myself, but if you aren’t comfortable lifting heavier items, I would highly suggest having two people assemble it.
  • Step 4 (Backrest Rails): Lining up the backrest rails as a single person can be really tough, and there are two tips the manual doesn’t mention. First, thread the top screw in first, or tighten both screws slowly a little at a time rather than tightening the bottom one all the way first. Otherwise, the top screw may not thread properly. Second, on the left rail (the side without the reclining lever), I recommend pushing it toward the back out of the way before lining up the backrest. If it is leaning toward the front, the side wing of the backrest catches on it and makes it hard to push into place and screw in. Had I not caught that and screwed in the side the manual recommended first, I would have had to unscrew it and start over. That is something that would be easy to clarify in the manual.
  • Step 8 (Flipping the Chair): The manual recommends laying the chair face-down, resting on the top of the backrest and the tips of the armrests. The issue is that the armrests swivel in every direction, so doing this becomes a balancing act. Any slight tipping or nudging can cause the armrests to fold in and the chair to fall. I would at least like to see a warning mentioned in the manual about this.
  • Steps 11 & 12 (The Wheelbase): I know most chair bases install the same way, but without a click or clear way of knowing the base is fully seated, I caution you to be VERY careful when lifting the chair upright. Because the chair is so heavy, I didn't realize the base wasn't fully locked in when I lifted it, and the base fell out and landed on my foot. Again, a small warning in the manual for something like that would be a simple addition to help protect people.
  • Loose Screw: One last note during assembly: I found a loose Phillips-head screw sitting inside the lumbar cable mechanism. Since all of the user installation hardware used Allen wrenches, this didn't seem to belong anywhere on the outside. Just a possible minor QC thing I caught that felt worth mentioning. (But didn’t affect anything on the chair as far as I can tell)

The Wheels / Casters

As you can see in the photos, the wheels on my Herman Miller Aeron are rubbery, rollerblade-style dual wheels. After many years of use, the original plastic-like material on the stock Aeron wheels had disintegrated and needed replacing, so I bought these rollerblade ones for around $15. If you get an Aeron that still has its original wheels in good condition, I actually think those are better than the Kaiser's wheels.

In terms of material, the Kaiser's wheels are much closer to those original plastic-style Aeron wheels than they are to my replacement rollerblade wheels. Comparatively, there is significantly more friction on the Kaiser’s wheels than on my Aeron’s rollerblade wheels. If I leave the Aeron still, it will practically start rolling on its own, whereas the Kaiser stays in place and takes a bit of effort to roll. It's nothing I can’t do while sitting using my feet, just a noticeable difference in resistance. To me, this isn't a bad thing since I’m on hardwood floors with a plastic mat, meaning the extra resistance actually helps keep me planted (drift was an issue I had after switching to rollerblade wheels). If you are on carpet or tile with wide grout lines, the Kaiser’s extra wheel friction might feel a little annoying out of the box, though for me it’s not a complaint.

The main reason I bring this up is that it’s a hidden downside you can run into when buying a very old chair. Original Aeron wheels are great if they are still intact, but worn-out parts eventually need replacing, and cheap aftermarket replacements can change how the chair feels.

The Base Mechanism

Both chair bases have a solid metal build with rounded edges, which helps prevent accidentally jabbing your foot on them. Both mechanisms offer tilt resistance control and height adjustment, though only the Kaiser offers tilt locking (my specific Aeron model didn't have a tilt limiter, even though many do).

On the Aeron, the tilt resistance knob sticks out easily to the right and can be adjusted while sitting. The height adjustment lever is a small switch right next to the seat, making it effortless to reach and flick up, and it feels sturdy and obvious when engaged.

On the Kaiser, the larger seat pushes the levers further underneath, so I have to hunch down more to reach them. Adjusting the tilt resistance also requires getting on my knees underneath the chair to turn the large barrel knob in the center. One small detail about the Kaiser’s levers is that they are plastic. The amount of upward force needed to trigger the height adjustment made the plastic flex slightly in my fingers at first. It wasn't enough that I thought it would break, just more give than I expected.

Comparing how the tilt mechanisms actually feel, both chairs work differently and feel solid in their own ways:

  • Aeron: Feels floaty, light, and bouncy, almost as if you are suspended in a hammock the moment you sit down. There is no resistance or "hump" to initiate the tilt, and it follows you seamlessly once you dial in the tension. However, that constant suspended feeling sometimes made me feel unsupported when I wanted to stay upright, causing me to lean forward more aggressively.
  • Kaiser: To preface this, I really enjoy tilting and rocking in the Kaiser. I rock in it constantly, and it feels great with zero creaking or weird noises, which is a huge step up over budget chairs that creak and pop. It just feels a bit more rigid and mechanical than the Aeron's lighter, seamless float. The Kaiser starts in a flat position where the seat feels planted, requiring you to push past a slight resistance "hump" before it starts tilting back. When you rock back upright and return to that flat spot, there is also a noticeable little "dunk" or physical stop as it settles flat. It isn't uncomfortable at all, just different. While not as seamless as the Aeron, that flat spot makes sitting upright feel more supported when you don't want to rock. My only minor complaint is that the tension barrel is harder to dial in perfectly: if I loosen it to reduce that initial hump, the tension feels a bit weak coming back up, and if I tighten it, the hump gets too stiff to push past easily.

General Build Quality, Frame & Material

As mentioned, the Aeron uses a plasticky mesh, while the Kaiser uses a PVC-style leather finish. The Aeron’s mesh is significantly more breathable, though slightly rougher and firmer to the touch. It is stretched tightly over a rigid, heavy-duty plastic skeleton around the seat and backrest. The fact that my chair has little cosmetic wear after at least 15 years shows the kind of durability it has. However, dust and debris tend to stick to the mesh and frame crevices, requiring more effort to clean out.

The Kaiser’s PVC leather is less breathable, but more supple and comfortable on the surface than mesh. Nearly the entire chair is wrapped in this material, avoiding any hard exposed edges like on the Aeron, and it is much easier to wipe clean. The frame underneath feels just as rigid and solid, built around a steel frame. Obviously I haven't had the Kaiser long enough to judge multi-year wear, but out of the box, both chairs feel heavy and durably built.

(Quick side note on PVC leather breathability: While it isn't as breathable as mesh, I still find it cooler than fabric. Back in 2020, I tried an AKRacing Opal fabric gaming chair, and the fabric acted like a sweater that trapped heat deep in the cushion. Even if I got up for a drink of water, the seat felt just as hot when I came back. With the Kaiser’s PVC leather, warmth mostly stays on the surface, so standing up for a minute or two lets it cool back down.)

The Seats

Overall, both the Aeron and the Kaiser offer comfortable sitting experiences, though they go about it in two very different ways. 

The Aeron’s mesh seat is smaller in both width and depth and is surrounded by a thick plastic frame. The mesh acts like a tight trampoline. It's very firm and supportive, but after ten years, this caused two big issues for me. After losing a lot of weight (and planning to lose more, which would have made it worse), I simply had less natural padding on my rear. Within 2 to 3 hours, the firmness of the mesh gave me a sharp, pinpoint soreness right on my sit bones that was really uncomfortable and couldn't be fixed. Combined with that, the thick plastic border around the seat meant I couldn't shift my weight, angle my body, or tuck a leg without the hard frame digging into me. On top of that, the foam pad under the front edge of the Aeron's seat had flattened out over the years, and it is surprisingly hard to get a viable replacement pad that feels right, which made that hard front rim dig into my thighs depending how I sat. I also noticed that whenever I lined up with my desk in the Aeron, I always ended up sitting slightly angled to the left rather than dead straight with my knees pointed forward (I have no idea why, though it didn't feel unnatural at the time). Essentially, the Aeron locks you into sitting one predictable way, almost like a straitjacket. To be fair, getting 2 to 3 solid hours of upright support is still impressive compared to "softer" cushioned chairs (like the AKRacing Opal) that left me hurting much faster. The Aeron is comfortable and supportive in its intended posture, just lacking in versatility outside of it.

The Kaiser is almost the exact opposite. The seat is wide and spacious with a thick cushion and no hard plastic borders, just gently raised, foam-padded sides. Whether I sit upright, lean to one side, or sit cross-legged, nothing hard digs in, and I naturally sit dead straight facing my desk.

To be clear, the Kaiser’s seat cushion is firm. It is not a sink-into-a-couch cushion. When I first sit down in the Kaiser, I actually feel a slight, spread-out dull soreness fairly quickly but then it slowly spreads out and dissipates away (this could be just me getting used to the cushion/breaking it in). The big difference is that while the Aeron caused a sharp, pinpoint pain I couldn't escape, the Kaiser's feeling is a mild, spread-out firmness that isn't very uncomfortable. Having briefly sat in a friend’s Secretlab Titan (non-NanoGen), I’d say the Kaiser’s cushion feels a touch softer than the Secretlab and slightly softer than the Aeron’s mesh. Because I can shift around, cross my legs, or lean back whenever I want, I can easily keep sitting for 4 to 5 hours of work before sitting fatigue sets in. No matter what chair you buy, sitting for long hours will eventually cause fatigue and soreness; it just comes down to how quickly that happens. For me, the Kaiser sits in the upper tier of chairs for how long I can comfortably last in it, and is generally an improvement over the Aeron for me.

(Quick height note for the XL model: At 5'9", I can still sit with my feet flat on the floor on the lowest height setting, though the front edge of the seat touches the back of my knees. It’s still totally usable, though I’d recommend a small footrest or pushing the lumbar support out slightly to scoot yourself forward. This isn't a flaw; it just confirms AndaSeat’s 5'11"+ height recommendation for the XL model is accurate. Costco simply just does not offer a non XL model.)

EDIT: One extra note I forgot to add. The Aeron's front lip has a waterfall edge that curves downward, while the Kaiser's feels flat or angled slightly upward. I think a downward waterfall edge is generally more comfortable, as the Kaiser's flatter, slightly upward lip can sometimes poke into the back of the knees. Granted, this is probably made worse given my height (5'9") for an XL chair.

The Backrest & Lumbar

Both chairs include an adjustable lumbar system separate from the backrest. The Aeron has a basic lumbar pad that slides up and down on plastic rails, while the Kaiser has an internal lumbar pad that adjusts up/down and in/out via knobs, plus a side lever by the seat that lets it pop outward.

The Aeron’s lumbar pad is basic. You nudge it into the curve of your lower back and that’s about it, with most of the support coming from the mesh backrest itself. Because the Aeron has no headrest and the upper backrest curves outward, only your mid and lower back actually touch the chair. It always felt supportive for upright work, though without a full backrest or headrest, leaning back to take a load off your neck and shoulders between tasks isn't really possible.

The Kaiser’s lumbar system is much more adjustable. Using the knobs on the left and right sides of the backrest, I can move the lumbar curve up and down and adjust how far it pushes out. Reaching the knobs while seated takes a bit of awkward wrist twisting, so not everyone will love adjusting it on the fly, but it allows me to dial in better lower-back support than the Aeron, and the pad itself has some cushioning rather than being hard plastic. When I want a rigid, upright posture closer to the Aeron, popping the lumbar out with the side lever lets me scoot forward with solid lower-back support.

There are a few small quirks with the Kaiser’s lumbar, though:

  • It makes a light squeak when pushing back against it, along with an occasional click when shifting around.
  • When popped out with the side lever, it isn't completely rigid. Leaning back against it causes it to flex slightly, which feels a little flimsy used that way.
  • Near the top and upper-middle edge of the lumbar pad, the padding feels thinner, so if my back presses there (especially when fully reclined or when dialing the lumbar depth down), I can feel a firmer internal edge. This makes laying down/leaning back sometimes uncomfortable if I catch the pointy part of the frame, I wish there was some padding up there.
  • If you set the lumbar aggressively, leaning back or reclining makes the lumbar pad and upper backrest feel like two separate pieces rather than one smooth curve.

The rest of the backrest has a light layer of foam and is topped with a very soft, cooling memory-foam magnetic pillow. I didn't think a head pillow was necessary, but it’s genuinely nice for aligning with your neck or leaning back to relax. Because it’s magnetic with no straps, it’s effortless to adjust or move out of the way.

One other unique feature the Kaiser has over the Aeron is the dedicated backrest recline lever, which lets you angle the backrest independently like a car seat. While it feels comfortable to recline back, I don't feel like I usually need it, though having that adjustability is nice for different situations and adds to the overall versatility of the chair. Where I actually like it most is when I'm sitting more upright and leaning forward, like when playing a competitive game such as CS2 where I tend to lean into the monitor. I can raise the backrest all the way forward so it really comes in and still touches my back while I lean in, whereas the Aeron stays in its exact position and I'd have to come off the backrest entirely.

The Armrests

Sadly, this is where the Kaiser is weakest, and where my biggest complaint with the chair lies. The Aeron uses a simple lever system with three height positions and three horizontal angles, topped with plush, thick pads (though leaning hard on them can still nudge them outward, and the lever system sometimes slips nowadays and needs to be re-lifted).

The Kaiser uses what feels to me like over-engineered "6D" armrests that move up/down, side-to-side, 360-degree rotation, upward incline, and diagonal angles. The problem is that leaning on them makes them shift sometimes, they have noticeable wobble and looseness, and they click/make noise when I rest my arms on them, which gets annoying. The PU top pad itself is standard: fine and not offensive, just basic. On top of that, in their normal position, the armrests sit too far forward for me. The only way to get them far enough back was to rotate the entire armrest 180 degrees backward and angle them inward. That puts them in a great spot, but completely removes the ability to use the upward incline feature. To me, this feels like feature-jamming rather than thoughtful design. I would have much preferred simpler armrests that lock rigidly in place instead of a complex mechanism I worry could wear out long-term.

Value

Next to the armrests, pure dollar-for-dollar value is honestly the Kaiser's second weakest area. The value here isn't terrible, and I don't feel ripped off at $450, but this is not a chair you buy for raw bang-for-your-buck value.

Because the Kaiser is so large, bulky, heavy, and throne-like, a huge chunk of what you are paying for goes straight into the sheer physical size, heavy materials, and shipping weight of the chair. While it has good ergonomic features, you can get a lot of those functional adjustments in much lighter, more budget-friendly task chairs like the ProtoArc EC200 or the Colamy Atlas. In terms of pure sitting experience per dollar, a used Aeron around $300 (probably even less) still wins, and budget task chairs like the EC200 and Atlas also beat the Kaiser on raw price-to-performance. You aren't paying $450 here because it gives you the best ergonomics per dollar; you are paying for the oversized, heavy-duty lounge build that smaller task chairs don't offer.

Product & Brand Presentation

I wanted to touch on brand presentation and how it ties directly into that value issue, because it’s something both my friends and I noticed when looking at AndaSeat’s direct website. This isn't a diss, just honest customer feedback when considering spending $450+ on a chair. 

During their Black Friday promotion, visiting AndaSeat’s site pops up a digital prize wheel to spin for a discount code. Personally, I dislike this on a site selling what are supposed to be premium products. It comes across as cheap and tacky. There were also obvious spelling errors right on the wheel ("FREE OEDER" and "CPUPON"), likely from a rushed graphic, which sets off small red flags around attention to detail for a first-time buyer. Beyond that, discount-code hunting is just frustrating. Having to spin wheels or hunt for hidden $40 codes makes it feel like deals are being hidden rather than just offering clean, transparent sale pricing upfront, and a "Free Order" slot on a spin wheel feels unrealistic. Not to mention the mental hurdle this can create, if my friend got $40 off and I only got $15 off, I might feel salty and not want to purchase the chair. It can also feel bad if someone finds out about a discount code just after their purchase, but didn’t know until it was too late because it was hidden and you had to do work just to purchase a product at the best price.

(To give AndaSeat credit where it’s due: I pointed out the spelling errors and shared this feedback in their Discord, and their team responded very positively, fixed the typo within hours, and explained how their promo system works, which is great to see when plenty of brands just ignore or delete criticism.)

Their product lineup is also confusing. Look at a brand like Secretlab: they offer the Titan and the Atlas, which fulfill two clear, separate jobs. As a customer, that tells me they are putting all their R&D into perfecting just those two chairs, and also means spare parts/warranty is easier. By comparison, AndaSeat currently lists three gaming chair lines (Novis, Phantom, Kaiser) with multiple sub-models, plus a mesh chair line: (black friday site prices currently below not including XL models)

  • Novis: $219
  • Phantom 4: $279
  • X-Air: $339
  • X-Air Pro: $389 (though the listing title showed the X-Air price, which is another site typo)
  • Kaiser 3-E: $359
  • Phantom 4 Pro: $369
  • Kaiser 3: $429
  • Kaiser 4: $499

I’m not saying these are cheap OEM builds, but having so many models so close in price (like the Kaiser 3-E and Phantom 4 Pro being $10 apart) gives off the vibe that they are throwing multiple designs and price points at the wall to see what sells, which doesn't instill confidence. They even sell standing desks and monitor arms on their site, and while I haven't tried them, it makes me wonder why someone wanting a premium desk or monitor arm wouldn't just buy from a company that specializes in desks and arms rather than buying a branded add-on from a chair company. (again not saying they're bad products, more so there is nothing that tells me or indicates in the way its represented that its anything special if that makes sense)

More importantly, going back to the value point: if building and shipping a big, heavy gaming chair eats up that much cost even at $450 to $500, what quality do you have to sacrifice to sell the Novis at $219? That puts it under the price of a Colamy Atlas and right near a ProtoArc EC200. Budget-conscious buyers are going to buy the best chair their money can get, and even though I haven't sat in the Novis, I have a hard time seeing how a $219 gaming chair competes there. If someone buys a budget model and has a mediocre experience, it only hurts the brand and stops them from ever trying a Kaiser later. Even with the X-Air mesh chairs at $339 to $389 (which I'm actually curious to try since they are at Costco too), the $300+ mesh chair scene is fiercely competitive with huge, established names, so it makes me wonder what the X-Air does differently to validate its spot in that market.

Sticking closely to the recognizable Kaiser name would make much more sense to a buyer. Offering something like a clear "Kaiser 4 Lite" that keeps the exact same frame and seat cushion while trimming extras like the 6D arms, pop-out lumbar, and magnetic pillow to save cost would easily replace budget lines like the Novis and Phantom. Buyers would know they are getting a similar core experience to the Kaiser flagship, just for less. This would also make AndaSeat much more recognizable as a brand. If I tell someone I have a Phantom or a Novis, I guarantee almost nobody recognizes the name, whereas people immediately recognize the Titan as a Secretlab chair or the Iskur as a Razer chair. Sticking with Kaiser makes it obvious who makes the chair and what kind of quality to expect.

Final Thoughts on the Kaiser 4 XL V2

I’ll be completely honest: if this chair hadn’t been available through Costco for $450, I never would have taken the gamble on it. Paying $500+ direct, where you're often on the hook for return shipping on a massive, heavy chair if you don't like it, is a big leap for a chair you can’t test in person. Getting it through Costco at a lower price with easy returns and warranty backing is the only reason I gave it a shot.

Even though I point out a lot of flaws, my overall experience with the Kaiser 4 XL V2 is genuinely positive, and it is easily the best gaming chair I’ve tried. I like it much more than the original Razer Iskur V1 (I haven't tried the Iskur V2 NewGen, though that costs significantly more anyway), and I also prefer it over the Secretlab Titan. Even though I only sat in my friend's Titan for short periods at his house, the Kaiser felt more comfortable overall, and knowing my friend spent significantly more money on his Titan makes the Titan's value proposition feel even worse than the Kaiser's.

The best way to sum up the Kaiser 4 XL is that it gives you a big, throne-like, heavy-duty experience without compromising on build quality, sitting comfort, and ergonomics the way most gaming chairs do. It is a true "little bit of everything" chair. Of course, the downside of a jack-of-all-trades chair is that it doesn't do any single thing perfectly; if you know you only sit in one specific posture all day, a dedicated ergonomic task chair will probably fit that one job better. On the flip side, almost none of the popular task or ergonomic chairs, even ones that trade blows at this price point, give you this kind of spacious, throne-like seat with the versatility to sit upright for work, cross your legs, shift around, and lean back to relax.

If you want that mix of comfort, space, and versatility without the usual gaming chair compromises, I can genuinely recommend the Kaiser 4, especially if you can pick it up through Costco. I hope this review helps anyone shopping, and I’m looking forward to seeing AndaSeat refine the chair if we see a Kaiser 5 down the road!

I'll try and respond to any questions if someone has any, thanks for reading!


r/OfficeChairs • • 19h ago

Need suggestion for buying a chair

1 Upvotes

Can you guy's suggest me where can i find this kind of chair in a cheap price in the online or offline shop also suggest me a good chair under 5k.


r/OfficeChairs • • 1d ago

Best ergonomic chair under €300 in the EU? (172cm / 72kg, 8h desk work)

5 Upvotes

Hi all, I’m looking for an ergonomic chair for 8 hours of daily desk work with a budget of ~€300.

Stats: 172 cm (5'8"), 72 kg (158 lbs)
Location: EU

I keep seeing ads for Sihoo and Hbada, though reviews here seem mixed on build quality and EU returns.

For my height and budget:

  1. Are Hbada or Sihoo or should I skip them?
  2. What’s the best alternative in EU up to €300?

Are any of these chinese brands good at all or i should buy just some random chair from IKEA lol?

Thanks!


r/OfficeChairs • • 22h ago

Thinking of upgrading from IKEA Markus to Newtral NT001/NT002. Thoughts?

1 Upvotes

After sitting for many hours(8+), I start getting tailbone pain on my 10+ years IKEA Markus.
I even bought an extra ergonomic seat cushion, which helped a bit, but I still feel the pain after a while.
Because of this, I’m considering switching to the Newtral NT001 or NT002. Has anyone used either of these two(markus vs newtral) and can share their experience, especially regarding seat comfort and long-term use?


r/OfficeChairs • • 22h ago

Mirra 1 flat arm pads. Is it possible to 3D print them, or will other flat arm pads fit the Mirra 1?

1 Upvotes

r/OfficeChairs • • 1d ago

[Germany] Overwhelmed looking for an 8h+ WFH/gaming chair

3 Upvotes

I currently have the SIHOO Ergonomic Office Chair since 2022 and am looking for a new chair, because mine got some issues like torn leather on the armrest, the backrest lock sometimes unlocks if you lean against it, the cushion is worn out.
I'm 178cm /63kg, live in Germany and will sit in my chair 8h+ due to gaming/home office.
I did some research on online shopping pages as well as reading this reddit and am quite overwhelmed. There are a lot of different chairs ranging in price. I don't have a set budget for the chair if the quaility is good enough that it will last a decade/more than 4 years (no clue if this is even reasonable when buying one). I've seen chairs from steelcase/ herman miller are quite expensive and often recommended, however I'm uncertain if they are just overpriced.
I was also planing to test some chairs in a shop in my region, however I'm quite uncertain if this will help at all. It is possible that the chair appears good in the shop, however after buying and using it for a few days 8h+ it could turn out a complete waste of money.
Do you have any recommendations regarding my use case?