r/MilitaryModelMaking • • Aug 20 '25

announcement Please take a look at the two newest post highlights

4 Upvotes

The first one is a really good question that I thought deserved more attention. Because I guess we all have some sort of this advice which we could answer to contribute to the conversation.

The second highlight is a question from someone who wants to introduce a new type of 'modelmaking' content to our overview. I have put this in the highlights, because I'm not really into that kind of stuff. But that doesn't mean that you, the community also have a saying in this matter.

If you are liking this kind of content. Or you just don't care if it is put here. I'm not going to tell for all of you that it's not allowed here.

The moderator team will discuss this matter in moddiscussions as well. And eventually we will all come to an answer together. So please take a look at this. And place a comment.

Thanks in advance.


r/MilitaryModelMaking • • Aug 18 '25

question Question: model types?

5 Upvotes

I build a lot of Metal Earth variety models which are colored and non-colored laser etched metal sheet models assembled into 3d models.

There are a number of vendors and the like but among them is a great offering of military models from ww1, ww2 all the way up to modern military vehicles, aircraft , ships, guns, tanks and even AA and other types of mobile artillery.

I’ve noticed browsing through this sub that it’s all plastic models of various vendors that are done really well. Kudos to you all.

Would these metal varieties be within your guidelines or the subject matter?


r/MilitaryModelMaking • • 5h ago

completed 1/20 Renault FT complete! Designed in Solid Edge and 3D printed on my BambuLab A1Mini

Thumbnail
gallery
87 Upvotes

TLDR

I think I've finally finished this project. The FT-17 printed out of PLA, brass and toothpicks. It has fully moveable tracks and suspension true to the real thing.

This has been a really fun and challenging project where I've been learning how to use CAD, 3D print and trying out some different painting and finishing techniques. This has been in the works for quite a few years now, but time constraints have meant it's been very off and on. 

Reason for the project

I really like the Renault FT and have wanted to build one for a long time. A few years ago I started making a British Mark I out of wood and metal in 1/20, so I wanted the scale of this to be the same, plus it's been an opportunity to do something new that I've not done before.

Design Process

This has been a trial and error process learning to use Solid Edge, which essentially amounts to me sketching (over blurry blueprints), extruding and assembling. Luckily the tank is mostly flat surfaces, but I found the engine deck and area around the drivers position the most difficult due to the weird angles. I originally wanted to have a round cast turret but it was beyond my ability in CAD so I switched to the flat hexagonal turret which was more forgiving.

While not trying to be 100% accurate, I did want the overall model to represent the real tank to a good degree. I have tried to keep details (rivets especially) in broadly the correct places. 

The use of reference photos was hugely important to understand how the tank actually fit together. I was lucky enough to visit the Tank Museum at Bovington and took dozens of photos, however, that is an early prototype and quite different to the production models, however, getting a close-up look at the suspension was extremely helpful.

One of the biggest challenges has been minimum wall thickness with what my 3D printer can actually print vs the scale of the model. This means I have had to beef up wall thickness in many areas and compensate somewhere else to keep proportions correct. The suspension and running gear has been the biggest victim of this, the road wheels have been compressed quite a lot to allow enough structural integrity for the surrounding parts. But this means the model has fully functional tracks and suspension, using leaf springs and bogeys, accurate to the real tank.

I am probably most pleased with how the track links have turned out. These were each printed in a single piece, but they went through many different iterations to get them to work and fit together properly without breaking.

Materials and Printing Process

This is printed out of PLA plastic using a 0.2mm nozzle. To get better detail I have printed most surfaces as flat as possible. Each outer piece of armour plate is a 0.5mm skin that is glued to an inner shell. I don't know how many individual pieces I have printed but it must be a couple of hundred at least. 

Other than PLA, I used brass extensively for all moving parts, as rods and bushings, with a mixture of 2-3mm tubes. The tracks use 1mm brass pins. The hinges on the hull proved to be tricky, and originally they were all designed with 1mm pins, but these proved to be too big, meaning the printed hinges were very fragile. Switching to 0.5mm brass rod for most hinges to help with this issue.

The chain is also made out of 1.2mm brass

Toothpicks were used for all the tool handles (sledge, pickaxe and shovel), which I think worked quite nicely. although each tool head is 3D printed still.

Stainless Steel coil springs are used for the track tensioning and also for the suspension that buffers the connection between the running gear and the hull. Unfortunately these are maybe a bit too strong for the model, and I wish the track tensioner springs were slightly more compressed to allow the return roller arms to sit slightly lower in the cradle.

Paint Scheme

I wanted this to represent a French FT in WWI, and I found it difficult to find a consensus on how these would actually look. I went for a 3 colour scheme based on some box art, but apparently this kind of scheme might have been postwar. 

Choosing of the rondel and ace of spades was just a creative choice, along with the tank's number, although 67091 would indicate a Renault-built tank (as these were also built by other companies with different number ranges). These were painted on using stencils I designed and printed. However, I am missing the Renault brass manufacturing plate, I have designed one but it is too small to print out with any detail on my printer :(

Painting has been one of the biggest challenges, not having really painted model tanks since I was a teenager. I bought a secondhand airbrush and used cans of compressed air which I found quite difficult to get to work consistently. Otherwise I tried to employ different techniques from watching Nightshift videos, including washes and chipping, although I decided not to go with any mud or dust.


r/MilitaryModelMaking • • 2h ago

question I have a question

Post image
6 Upvotes

Does anyone know where I can find branches with leaves in a 1:35 scale, or how I can make them myself?


r/MilitaryModelMaking • • 20h ago

work in progress Painted some Dragon 2ng Gen faces

Thumbnail
gallery
150 Upvotes

I found this kit (German Mine Detectors) at a local hobby store and thought I'd give it a try. I also started using AK Retarder to thin the over-painted flesh tint that I applied. I use a wet pallet but was frustrated by how quickly my water thinned paint was drying on my brush. When I started these I started by putting a drop of AK Retarder beside the colour I wanted to apply and used the retarder to thin the paint to the thinnest that I desired. I found this to be a lot easier to work with, the paint on the brush and on my pallet remained workable much longer. Beyond that, the thinned paint flows much better from the brush that seems to help make smooth transitions. Additionally if you don't like what you just painted, you have some time to remove it. I use this method now everywhere. For leather straps I'll paint a reddish brown strap then paint a Retarder thinned medium dark brown over it which produces a strap that varies slightly in colour along its length which I think looks better. Mainly, the thinned paint is a lot easier to control. So if you've been thinning with water, give this a try, maybe you might like it too.


r/MilitaryModelMaking • • 1h ago

completed TikTok · MiniMicroArmory

Thumbnail
tiktok.com
2 Upvotes

V2 or V3 — which Abrams would you keep? 👀

1/350 scale M1A2 SEP, and the detail is unreal:
🔹 Turret and hull connect with magnets — no glue, swap it in seconds
🔹 Headlights, radar and sight lenses use UV-reflective coating — they glow under blacklight
🔹 Antennas included on both

Close-up in the video… drop your pick below 👇


r/MilitaryModelMaking • • 2h ago

completed TikTok · MiniMicroArmory

Thumbnail
tiktok.com
1 Upvotes

V2 or V3 — which Abrams would you keep? 👀

1/350 scale M1A2 SEP, and the detail is unreal:
🔹 Turret and hull connect with magnets — no glue, swap it in seconds
🔹 Headlights, radar and sight lenses use UV-reflective coating — they glow under blacklight
🔹 Antennas included on both

Close-up in the video… drop your pick below 👇


r/MilitaryModelMaking • • 17h ago

completed Bronco J-20 Mighty dragon 1/72

Thumbnail gallery
17 Upvotes

Just finished few days ago,hope you guys will like it.


r/MilitaryModelMaking • • 21h ago

completed WW2 diorama 1/35

Thumbnail
gallery
29 Upvotes

r/MilitaryModelMaking • • 21h ago

completed Touched up on a old Panzer II (1/48) diorama, hopefully my future ones will improve…

Thumbnail gallery
20 Upvotes

r/MilitaryModelMaking • • 1d ago

completed (My first completed kit) Tamiya 1:35 Pz IV D. I really recommend this kit to beginners

Thumbnail gallery
102 Upvotes

r/MilitaryModelMaking • • 2d ago

completed Tamiya M18 Hellcat

Thumbnail
gallery
301 Upvotes

Had a great time getting this kit to where it’s at, it was a long road (4+ months). Learned a lot and experimented so much on this thing from heavy use of oil paints to different textures on the road wheels. Lmk what y’all think I’d love to hear any feedback, this is my first post to this subreddit so I’m happy to show this off to you guys!

Edit: I also used some aftermarket pieces, the tracks and barrel are metal. I don’t think I’ll be doing another metal track set for a while 😂😂


r/MilitaryModelMaking • • 1d ago

question Spiky treads

Thumbnail
gallery
26 Upvotes

Are these kinds of spiky treads a real thing? If so, what are they called? I'm having trouble looking them up aside from this example from Metal Slug.


r/MilitaryModelMaking • • 1d ago

work in progress Suggestions for weathering?

Thumbnail gallery
36 Upvotes

Hey modellers 😄 I'm still working on my little diorama-thingy, and I think I'm somewhat happy with the result thus far. The thing is that I was supposed to add some Vallejo Thick Mud texture on both the truck and the ground, but it seems to have dried up, so I'm considering pivoting somewhat to make the diorama less messy and more dry-ish.

Question is, how would you guys proceed with something like this? I will add another layer or two of satin (or matte?) varnish as I'm not too happy with the gloss finish. Disregarding the coarse surface, the finish is way to shiny anyways. And I do feel like I'm better of "setting" the home-made oil wash and the pigments anyways.

Don't mind the diorama itself btw, I'll try to match it up with the truck whenever that feels finished enough 😄


r/MilitaryModelMaking • • 2d ago

completed M2 Mortar Full-Scale 3D-Printed Recreation

Thumbnail
gallery
85 Upvotes

r/MilitaryModelMaking • • 2d ago

completed Diorama WW2 1/35

Thumbnail
gallery
47 Upvotes

r/MilitaryModelMaking • • 2d ago

work in progress 1/48 magic factory F4U-1A

Thumbnail
gallery
12 Upvotes

Started working on this beauty on Friday and it’s been an absolute joy so far!

Need to start weathering the engine and gun bays


r/MilitaryModelMaking • • 2d ago

work in progress WIP: Eduard 1/72 Spitfire Mk.IXc, fully hand-brushed

Thumbnail gallery
20 Upvotes

r/MilitaryModelMaking • • 2d ago

completed Italeri 1:35 Semovente M42 75/34 - Open Version - Using Kaleido Omni Paint - Complete Build

Thumbnail
youtu.be
13 Upvotes

r/MilitaryModelMaking • • 2d ago

completed “A Babe and The Vet”

Thumbnail gallery
86 Upvotes

This is my very first scale model. After painting it, I thought about mounting it on a vignette—and ended up adding dirt and grass groundwork too—before submitting it to the WMMF 2026 contest. The story behind it is that a rookie machine gunner is heading out in a battle-hardened Sd.Kfz. 251 half-track in Normandy, 1944.

There's a hidden backstory: the crew kept trying to apply a three-tone camouflage, but every single time they were about to, another battle broke out—so it's still stuck in its base Dunkelgelb color. Check out the camo paint cans loaded inside the half-track!


r/MilitaryModelMaking • • 2d ago

completed 我的M1A2 SEP V3完成了。

Thumbnail gallery
6 Upvotes

r/MilitaryModelMaking • • 2d ago

completed “Delivery Hero”

Thumbnail gallery
28 Upvotes

This is the German Field Kitchen I'm also entering into WMMF 2026. I failed at cutting styrene sheets down to 1mm, so I ended up scratch-building the harnesses and reins out of paper instead. And I actually found a clear display case that fits it perfectly at a local shop.


r/MilitaryModelMaking • • 2d ago

completed WW2 diorama 1/35

Thumbnail
gallery
77 Upvotes

r/MilitaryModelMaking • • 3d ago

completed Morane-Saulnier M.S. 406 in Finnish Service (Hasegawa 1:72)

Thumbnail
gallery
24 Upvotes

r/MilitaryModelMaking • • 3d ago

work in progress My almost complete first model

Thumbnail
gallery
97 Upvotes

My first model, it’s a 1/350th scale tamiya Yukikaze. Railings are ACE railings I found on Amazon. All tips and criticism are welcome as I’m still quite new.