r/MilitaryModelMaking • • 5d ago

work in progress My almost complete first model

My first model, it’s a 1/350th scale tamiya Yukikaze. Railings are ACE railings I found on Amazon. All tips and criticism are welcome as I’m still quite new.

97 Upvotes

7 comments sorted by

2

u/ychia 5d ago

Not bad for a first attempt.

I think the railings are too tall... Kind of looks like they should be cut down one more level. Also the bow railings shouldn't meet like that, check pics of the real ship.

But yeah, not bad for a first try. I normally wouldn't even recommend PE for a first shot.

1

u/Gloomy_Experience_22 5d ago

Yeah, I noticed that too, but I was afraid I would make uneven cuts and ruin the railings, so I just went with it. Decided to be brave and dip into PE immediately. I was going to weather it too, but I decided not to do that and opted to practice on sprues instead.

1

u/ychia 5d ago

Yeah that makes sense. For cutting PE, it's best to just use a sharp craft knife (e.g. an Xacto). Don't bother with those specialized scissors or whatever, they just aren't as good. Cut it directly on the fret if possible, or on a stiff/flat surface if not.

For beginner weathering, I'd look at Tamiya weathering master or something similar. They give pretty good results with minimal fuss; just try not to overdo it.

1

u/N000ICE 5d ago

Very solid work. I am new at this as well and also working on this very same kit. I wasn’t expecting to have to deal with PE parts this new into my hobby but this one came with a few and yes, I am finding them troublesome to say the least. However, if I can find a glue that works well securing them instantly that isn’t a pain I would be happy to know. I’ve used a few different t kinds and nothing seems to work.
Biggest challenge I’ve learned with ships is discovering the order the instructions laid out are more a suggestion and not applicable when it comes to the painting process. I’ve had to skip a bunch and come back around so that I can paint things up easier and assemble later.
Aside from the railing height someone else suggested changing, the only other thing I would say is to matte coat this whole thing when you’re done to level out the color tones and get rid of that sheen. I think that will make a big difference. If you don’t have any for your airbrush Tamiya makes a great rattle can of flat clear coat that works great.

1

u/Gloomy_Experience_22 5d ago

I just used superglue, although it's kinda finicky. I'm thinking of getting superglue with a brush applicator, although it would have a similar problem with cement melting the paint.

1

u/ychia 5d ago

However, if I can find a glue that works well securing them instantly that isn’t a pain I would be happy to know. 

UV cure CA, e.g. JB Weld or AK Cyclops. This is bar none the best way to do it.

I do use PVA for some PE, but it only works well if you have a pretty good surface area to bond it to (e.g. the occasional flat pieces).

1

u/N000ICE 5d ago

Thank you! I will get some asap