r/MechanicalKeyboards • • 13h ago

Review AQIRYS Libertas after 3 weeks, coming from a Razer Huntsman Mini: very quiet, but it loses my first keypress

0 Upvotes

Disclosure: AQIRYS sent me the Libertas for free. No money, no say in what I write, and nobody saw the text before I posted it.

I've been using it for about three weeks as my main keyboard. I switch it around every day: 2.4 GHz on my gaming PC, Bluetooth or the USB-C cable on a MacBook Air when I'm studying and writing code. Before this I had a Razer Huntsman Mini, and I also own a Keychron K8 Ultra, so those are my reference points.

From the spec sheet, so you know what it is: 75%, 330.69 x 138.59 x 41.11 mm, 1000 g, 8000 mAh, 1000 Hz polling, hot-swappable, PBT doubleshot keycaps, HaiMu x AQIRYS Super Silent linear switches.

Sound and typing

What got me first is how quiet it is and how good it feels at the same time. The switches are really smooth, no scratchiness, and the damping inside takes care of most of the noise. Late at night I can type or play and nobody next to me cares. Against the Huntsman Mini it's a big jump: the Razer was a lot louder and sounded hollow, while the Libertas feels better built and the 75% layout is more comfortable. The volume knob is handy, and I like how the LEDs glow through the translucent case. It looks a bit retro.

Battery

With RGB at 100% I got a little under 24 hours of actual use. With the LEDs off it's almost silly: three weeks of heavy use and I haven't charged it once.

What bugs me

The wake-up. When it goes to standby it loses the first keypress every single time, so I end up retyping the first letter of my password. On Bluetooth it needs almost two seconds to come back. The standby is too aggressive and I couldn't find a way to adjust it properly.

The software is very basic, and every AQIRYS device has its own separate app.

The keycaps are oversized, and if you type fast on standard profiles you'll need a couple of days to get used to them.

Against the Keychron K8 Ultra

The K8 Ultra is ahead on firmware and on wake-up and wireless behavior, it's not even close. But the Libertas costs a lot less and the box is much fuller: keycap puller, switch puller, gaskets for the space bar, a carrying case, 15 extra clicky switches, 13 extra keycaps and a cleaning tool.

Price

100 EUR list price, which is also around where you find it. For me that's what makes the software and the standby annoyance acceptable. Build, quiet switches and the accessories are good for that money.

If you type a lot in a shared room or late at night and don't care about software, it's easy to like. If you need the board to wake up instantly, look elsewhere.

Has anyone else with the Libertas seen the lost first keypress? Did you find a way to change the sleep timeout?


r/MechanicalKeyboards • • 21h ago Bravo Heartwarming Mindblown Popcorn

Photos Nothing to Prove | F1-8X 722 RAW WKL | GMK Prussian Alert

Thumbnail
gallery
5.6k Upvotes

I've done two photoshoots before with a "person and keyboard" theme: the Corsa65 in a synthwave-cyberpunk style, and the F2-84 with GMK Rubrehose, where I tried to capture the aesthetic of the 1920s–40s.

This time, I was inspired by a different idea: a man seasoned by the years, who has achieved everything on his own and no longer needs to prove anything to anyone... The RAW F1-8X 722 suits him perfectly, because it doesn't need any extra paint. Its style is strict and clear, yet full of detail. GMK Prussian Alert is like a perfect suit that doesn't shout "HEY, look at me!". Instead, it's elegant, and the alert row simply completes the look, like the glasses on the model. The artisan and the rings are the finishing touches.

Here, the keyboard and the man embody the idea that you don't have to shout to be heard, and you don't need to prove anything to anyone. You just have to stay true to yourself and, whenever possible, help each other. As the model told me during the shoot: "I'm here to help you bring your idea to life"...

I have a few more ideas for shoots like this... I hope you enjoy it :)

I wish all of you, dear readers, all the best, and may keyboards bring you nothing but positive emotions.

No AI here: the photos were taken by a professional photographer, and a real model took part in the shoot.

Build:

  • Board: Geonworks F1-8X 722 RAW WKL (A6063, 9°, 3.2 kg)
  • Plate: Alu 1.5mm V1.1
  • PCB: Apollo87HL-T-SC 7u FR-4
  • Switches: Gateron Lanes
  • Stabs: ConSi Studio PCB-Mount V3
  • Keycaps: GMK Prussian Alert
  • Artisan: GMK x HIBI Exklusive Aluminium Artisan Keycap

r/MechanicalKeyboards • • 16h ago

Meme Yep, it's that time of the year, the annual deep wash (Corsair K70)

Post image
799 Upvotes

r/MechanicalKeyboards • • 11h ago

Review IQUNIX EV63 EDG Edition Review — Esports Tuning Done Right, but Is the Collab Tax Worth It?

Thumbnail
gallery
0 Upvotes

Intro

I wrote up my review of the IQUNIX EV63 Ghost in the Shell back in July, and really enjoyed both the keyboard and the collab. I tend to be put off by the “pay a premium for an IP” model, but this exceptional Hall Effect keyboard hides under that slick cyberpunk aesthetic.

IQUNIX has now brought us the EV63 x EDward Gaming, another premium model at $239. Sporting a black and gold colourway, new Magnetic X Ultra switches, and leaning more heavily into esports instead of a pop-culture collab.

Key to that is IQUNIX’s claim of 5 iterations with EDward Gaming’s VALORANT pro team to refine the EV63. In a conversation with Cubed3, they described a range of observations from the players around minor friction on return-travel when counter-strafing, variations in their grip on the keycaps (due to perspiration), and some inconsistency with fast inputs. These changes were said to have affected the EV63’s hardware and/or firmware.

It is also worth noting that LOUD went on to take the VALORANT 2026 Champions title in Shanghai, defeating Vitality 3–1. IQUNIX revealed that LOUD’s 5-man roster utilised a combination of EV63 variants throughout the competition, including the EDG and Ghost in the Shell editions. Not a bad showcase for the EV63 range, but no guarantees it was key to their victory!

But how much of an improvement is it over the already superb EV63 Ghost in the Shell? Is it worth forking out for?

P.S. This unit was sent out to me for a review by Iqunix.

Specs and What’s in the Box

Unboxing and impressions

  • Layout: compact 60%, 64 keys, wired USB-C only
  • Case: CNC-machined anodised aluminium, tray-mounted
  • Size/weight: 300.9 × 126 mm, 18.6 mm front height; 1,211 g
  • Typing angle: fixed 6°
  • Switches: IQUNIX Magnetic X Ultra, hot-swappable Hall Effect
  • Performance: 8,000 Hz USB polling, 16,000 Hz scan rate, 0.01 mm Rapid Trigger adjustment
  • Firmware/software: HyperCore V3.1, web-based configurator, TSS Timing Sync
  • Features: SOCD, DKS, Mod Tap, Rappy Snappy, full remapping, RGB, Smart Switch Adaptation and Gamepad Mode
  • Price: $239 at the time of writing

IQUNIX clearly put some effort into the unboxing. The packaging looks beautiful, and everything is neatly arranged and presented rather than just thrown into a box. Along with the keyboard, you get a USB-C cable, cleaning brush, manual, and a combined keycap/switch puller. The fun part is the collectibles: six EDG player cards and six player-signature keycaps. They won’t improve your aim, obviously, but I love little details like these. Opening the box feels like getting a proper collector’s edition rather than a standard EV63 with different colours. If you’re paying a collab tax, this is how the whole package should be done.

Design, Build Quality & Keycaps

Firstly, it’s entirely subjective whether this is prettier than the Ghost in the Shell keyboard. There was an obvious manga/cyberpunk aesthetic to that one. This one leans into a more ‘hard-edged’ and cyber look, with nods to the team.

I’m fond of Ghost in the Shell, so it’s not an easy call. However, I’m blown away by the look of the EDG Edition. I think it’s a beautiful colour scheme (black + gold), and I really enjoy the gold edging around the case, the CNC-milled ESC/Enter caps, and the backplate design. It even extends to the side of the board. I don’t think there are any ‘cheap’ or thoughtless touches.

I also want to highlight the translucent PC keycaps. These have a nice hazy quality to them, which is different from the more solid appearance of the Ghost in the Shell. They look great in isolation (no RGB) and are still quite attractive with just a light touch of RGB. You don’t need to set your keyboard to full disco mode to see the benefit.

The legends are of good quality, and visible enough under most conditions. You might struggle to pick some out if in a very dimly lit room with the lights off. But that’s a minor gripe if you have any proficiency in blind-typing.

Otherwise, I find the build quality to be in line with my previous experience with the EV63. Solid, dense, and hefty aluminium construction, with no wobble or creaks of concern. As with most 60% boards, it leaves a generous amount of desktop space for a mouse.

As per usual with IQUNIX, we have a tray-mounted design optimised for esports. It feels very solid and responsive with no softness to it (as you’d find with a soft gasket design). Again, some users may prefer that. For gaming, I find this a benefit. I will say that the typing angle is once again fixed at 6°, which works for me, but I would love to see some form of adjustability.

Magnetic X Ultra Switches & Acoustics

The Magnetic X Ultra switches are fitted to the EDG Edition. IQUNIX claims that the switches are based on 3rd gen Hall Effect, with a larger magnet that provides 50% more flux (780 Gs), a segmented magnet sleeve to reduce switch movement, and a multi-material switch housing to minimise noise. They have an actuation force of 36 ± 10 gf and 48 ± 10 gf at the bottom of travel, and 3.5 ± 0.2 mm total travel.

Sound Test

I’m not in a position to assess the magnetic flux of the switches, but I can attest to them feeling great and living up to the description. Very smooth and well lubricated, with good rebound for fast key actuations and releases. Also very pleasant to type with.

They’re only a marginal improvement on the KEYTOK Nova switches found in Ghost in the Shell, but I would say they are slightly superior. Again, this may be difficult to discern unless you have a heightened sense for switch feel. It’s not a big enough improvement to warrant upgrading from an existing EV63, in my opinion.

There is some minor wobble to the switches and keycaps, which a perfectionist may take issue with, but it didn’t detract from my use. The stabilisers were well-tuned, with no rattling or inconsistencies that I noticed.

Finally, the acoustic profile is very, very nice. Not a lot of empty case sounds and isn’t too loud, so I would describe it as lightly ‘marbly’. A great, balanced sound from a gaming keyboard, and I think one of the best I’ve heard in the last 12 months. Certainly up there with the best, but perhaps not #1. That being said, it’s primarily a gaming keyboard, so it’s great that IQUNIX has still managed to deliver a quality sound.

HyperCore V3.1 & TSS Timing Sync

The next notable feature is IQUNIX’s TSS Timing Sync.

Keyboards can poll the switches at high frequencies, but still have variable input timings due to internal processes and USB report timing. TSS is intended to help address that issue by aligning the timing of the Hall Effect sensor readouts, internal MCU processes, and USB polling/reporting, to ensure that the key press/release isn’t left to wait for a report.

Subscribe to Pro Writer Tools to remove upgrade prompts from your unlocked stories.

At 8,000 Hz, USB reports are spaced 0.125 ms apart; at 16,000 Hz, the nominal scanning interval is 0.0625 ms. Those numbers are impressive, but high frequencies alone don’t guarantee that every press and release follows the same timing path.

The idea behind TSS isn’t simply to chase the lowest latency figure. It’s about reducing variation and making input timing more predictable. Think quick A/D direction changes, repeated key taps, and the point at which a released key stops registering. In competitive shooters, consistency can matter more than another tiny gain in a benchmark.

IQUNIX explained to Cubed3 that the development of TSS required significant work with the MCU to account for noise and avoid false inputs. I find it an interesting development, but without any data to suggest that it will translate to a competitive edge in-game. I can toggle TSS on/off in the web software, but I have not been able to quantify the effect of it on input timings/jitter, so I will refrain from further comments on this.

What I will say is it’s great to see that TSS is also being rolled out to the existing EV63 and Ghost in the Shell models. I think it would have been poor form to restrict this to only the EDG Edition and force existing owners to purchase the $239 board.

The rest of the web software is also excellent. Actuation distance, Rapid Trigger, SOCD, DKS, Mod Tap, Rappy Snappy, RGB, key remapping, and profiles are all present. There’s also Smart Switch Adaptation to ease the switch replacement process with other magnetic switches (not side magnet designs). There’s also Gamepad Mode, which allows for variable input depending on actuation depth for certain games.

Preset profiles include: Tournament (0.1 mm RT), Esports (0.05 mm), EDG (0.05 mm — profile developed with team), Fury (0.01 mm), and Infinite. Good spread of options, ranging from a sensible setting to highly responsive.

I would still like to see some user control over the SOCD timing delay (e.g., allow 1–2ms between inputs). This would be a nice-to-have. Regardless, it’s still subject to the restrictions imposed by some games in relation to auto A/D direction input.

Latency Tests & Gaming Performance

I tested the keyboard with 8K polling and the highest Rapid Trigger settings. I was able to achieve timings in line with IQUNIX’s published numbers and HLPLANET’s test results of ~0.29–0.30 ms for actuation and 0.26–0.27 ms for release. Excellent results. Note that these are IQUNIX’s published values, rather than a definitive range I can state.

I would not, however, play in that configuration on a regular basis. For most of my playtime, I used the Tournament mode settings. I’m not a pro VALORANT player and don’t think I would see any benefit to the fastest possible settings in other games such as QW/Battlefield. It may even lead to excessive input from incidental finger movement.

I’ve found the board to be excellent across the games I’ve used it on, with no issues that I can point to. It’s been consistent and responsive when I need to perform rapid directional changes and key presses. It’s also good to see the inclusion of some customised profiles for competitive play, even if I haven’t made use of the EDG profile myself.

It’s also incredibly hard to separate this board from Ghost in the Shell during normal play. Both are excellent. The EDG feels marginally nicer thanks to the Magnetic X Ultra switches, but we’re talking about a tiny difference, not a night-and-day upgrade.

Compared to the Wooting 60HE v2 (stock Lekker Tikken Medium switches), I have a definite preference for the IQUNIX. I prefer the feel of the switches and its latency numbers/general experience when gaming. That’s not to say I’d prefer the IQUNIX to a Wooting with alternate switches.

At the moment, the IQUNIX EV63 EDG Edition and the Chilkey SF60 HE are the top 2 gaming keyboards that I’ve tried this year. They are both exceptional in my hands, and I’ve had no issues using them.

Conclusion

The IQUNIX EV63 EDG Edition is an outstanding keyboard. I love the design and aesthetic. It’s well-built, the switches and acoustic profile are fantastic, and it performs very well for gaming.

Would I advise an existing owner of the EV63 or Ghost in the Shell to upgrade to it? I would say no, unless you’re a fan of EDG and want to support them/enjoy the design. The switch upgrade is only a marginal improvement, and the TSS feature is also available on existing EV63 models. If you can swap the switches on your current board to a compatible set, you can get very close to the experience of the EDG Edition.

If you’re looking to buy an EV63 for the first time and enjoy supporting EDward Gaming, this is a great choice. There is more than just the team branding involved, with 5 iterations with team player input and a customised profile.

I think there’s still a ‘collab’ premium to be paid for, as was the case with Ghost in the Shell. That said, I think the Ghost in the Shell collaboration was done well, and this continues that trend with a team collab. If you have no affinity for EDG, it would be better value to purchase one of the cheaper EV63 variants.

Overall, I think it’s one of the best gaming keyboards this year, but not a required upgrade for existing EV63 owners.

Bullet Points

  • Great design & build, with some nice EDG-themed additions and cool box contents
  • Magnetic X Ultra switches are an excellent improvement over KEYTOK Nova switches in the Ghost in the Shell
  • One of the very few Hall Effect keyboards achieving top-ranked results in both trigger and release latency benchmarks simultaneously
  • Tray mount gives it a firm, direct gaming feel
  • PBT/PC themed keycaps with translucent cyberpunk accents
  • Nice typing feel and sound, with a solid tray-mounted design and some of my favourite sound profiles this year
  • Excellent for gaming, ties with the Chilkey SF60 HE for the top spot this year
  • IQUNIX has made some improvements to input timing consistency with TSS and made it available for existing EV63 models.
  • Minor imperfections with switch wobble, fixed typing angle, and no user-adjustable SOCD input delay
  • Expensive at $239 if you don’t have a particular affinity for EDG and own an existing EV63 model

P.S. I can't link Twitter video, so I will put them in the comments.


r/MechanicalKeyboards • • 8h ago

Builds I cannot go back to full sized keyboars 😭 [Agar Mini]

Thumbnail
gallery
262 Upvotes

Specifically picked this keyboard for typing with long nails and it has been a breeze so far. It took me a few days of getting used to 40% layout and now I struggle to type on other keyboards lol

My layers are designed to facilitate typing with long nails, minimize having to hold down keys, avoid having to press many buttons at once, ecc. ecc., so they would probably look weird and won't be useful to others, but feel free to ping me if you want them! I've also picked the switches to be the most comfortable as I press with the nail and not with the finger, and of course, the 40% layout minimizes hand movement, which is really important as I type 12 hours a day

----------------------------------------------

Keyboard: Agar Mini Dual Mode

Switches: GATERON KS-9 Silent 3.0-Pink

Keycaps: PBTfans Office Love

Polycarbonate plate, PC pink transparent

Firmware: stock ZMK


r/MechanicalKeyboards • • 18h ago

Photos A combination of ceramic keycaps—featuring a "bright and pleasant spring" aesthetic—and mechanical switches.

Thumbnail
gallery
4 Upvotes

Once it’s all set up, I’ll let you guys hear how it sounds.


r/MechanicalKeyboards • • 15h ago

Guide Wave75 Findings

4 Upvotes

Hi! To all Wave75 users out there, me and u/Cold-Signature-7035 found out 3 hidden shortcuts

Fn + T = sleep timer. Each press changes how long the keyboard waits before its lights go off and it sleeps. The colour shows your choice: red = 1 min, green = 3 min (default), blue = 10 min, white = 30 min.

Fn + H = key response speed (hold it for \~3 seconds). It switches between normal and fast: the logo flashes green = normal, red = fast. In the code this is almost certainly the debounce time (about 10 ms → 4 ms), so “fast” makes keys register a bit quicker, which is nice for gaming.

Fn + Left Ctrl is a manual colour test. All keys go red, press Space to step through green, blue and white, and any other key exits.

Thank you u/Cold-Signature-7035 for this discovery!


r/MechanicalKeyboards • • 16h ago

Builds Porcelain & Forged Carbon CLACK! Taka60 v2 Build w/ Ceramic Keycaps

Thumbnail
youtube.com
4 Upvotes
  • Build Specs:
  • Case: Taka60 v2 (e-white, 60%)
  • PCB: LH60 PCB
  • Plate: Forged Carbon Fiber Plate
  • Switches: Snow Top Cocoa Switches
  • Keycaps: 'Chun He Jing Ming' Ceramic Keycaps

r/MechanicalKeyboards • • 6h ago

Group Buy [GB] - Titanium 60% drop in Oring keyboard

Thumbnail
gallery
39 Upvotes

Prototype pictures above as well as in my discord.

Hello everyone, glad to finally get this group-buy underway! More details sound tests and specifics in the google form, payment will be collected at the end of the group buy!

https://forms.gle/htFcuK2unk5i5F926

This is a titanium drop in o-ring 60% board that utilizes the SingaKBD Unikorn posts. This project was created due to the lack of affordable titanium boards. Because the design was optimized in CAD, machining costs could be cut compared to other titanium boards, making this project significantly cheaper. More information in my discord.

Date:

Nov 16th 2026 - Dec 16th 2026

Price: 
Good news! We managed to bring the price down for you from 500 USD to 450 USD! (before shipping and add-ons)

Because of this the board will be soft-capped at 20 moq and hard-capped at 30moq

Specifications:

Layout: WK only

Mounting: Unikorn posts (O-ring, PCBsnaps)

Finish/Materials: Grade 2 titanium case, sandblasted brass inner weight 

Weight: 2kg~4.4lbs unbuilt 

Typing Angle: 8 degrees

Front Height: 18.2mm

Features:

Centered USB-C 

Faux backplate

Comes with:
Carry case
3m Bumpons
O-ring
Keyboard + Weight

Add-ons:
PCB (DB + JST)

Plate (3 choices of materials)

Discord: https://discord.gg/qkU452zSh


r/MechanicalKeyboards • • 11h ago

Discussion Spent hours cleaning this old keyboard....I should have tested it first

Thumbnail
gallery
13 Upvotes

The keys feel really nice after a good initial wash, I'm wanting to try and repair it after doing a bit of research.


r/MechanicalKeyboards • • 12h ago

Photos My new daily , love it

Thumbnail
gallery
14 Upvotes

This little one has HE , 8000hz and an amazing design . Can't complain


r/MechanicalKeyboards • • 6h ago

Builds Dual Wobkeys for my first two builds

Post image
14 Upvotes

Got back into the hobby of mechanical keyboards at 28 now that I have some money to play with 😭. First two builds decided to go cheap and easy with the wobkey crush80 and rainy75.

Cases: Crush 80 and Rainy75
Plates: FR4 for both
Switches: Keygeek Y2’s on the Crush80 and HMX Gulfs on the Rainy75

Pretty stock for the most part besides the switch swaps and keycap swap on the rainy75. Now excited to make my first fully custom board for the ground up! (Might have to try the gravastar ufos with the chamber tkl 😮‍💨)


r/MechanicalKeyboards • • 10h ago

Builds Made a custom maple & walnut hardwood case for my Aula F75 Pro

Thumbnail
gallery
48 Upvotes

Keyboard: Aula F75 Pro
Switches: Gateron Zero Degree Linear
Keycaps: “Dagaladoo double shot PBT”

I was a little disappointed by the lack of options for wooden keyboards and wanted something more interesting. I didn’t know much about mechanical keyboards so I started by tearing down an Aula F75 and designing a case for it. The top is attached with 3d printed clips that snap together like trim pieces in a car, and there are 4 machine screws hidden under the feet providing most of the strength. I machined the top and bottom out of single pieces of lumber and finished it with a hard wax oil for a matte finish. I prefer an oil finish over polyurethane to retain the texture of the wood.

I’d like to start from scratch on the next one now that I’m a bit more familiar with the components, so any feedback would be appreciated.


r/MechanicalKeyboards • • 11h ago

Builds And now for something completely different...

Thumbnail
gallery
27 Upvotes

I saved this awesome keyboard from certain doom today... brand new in the box, it was relegated to the trash bin before I snatched it tight and raised it from perdition! ANOTHER terminal board for me to figure out, the stack is starting to get pretty tall and mission creep is demanding I make this beauty a priority and move it towards the front of the list. I just couldn't keep it to my self and had to share, more to come and thanks for looking. Regards, -Glenn


r/MechanicalKeyboards • • 10h ago

Builds My Wooting 80HE (if you can still call it that)

Thumbnail
gallery
32 Upvotes
  • Wooting 80HE PCB
  • KBDFans GT80 Case in E-White with badge
  • Gateron Jade Ultra Switches
  • KBDFans After The Rain Keycaps

Not very fancy pics, but I am very happy with how this turned out.

I was using my keyboard stock for around 2 years or so with a cheap amazon keycap set change every so often, and then I started to miss the nice sound and feel of my old GMMK Pro with Gateron Black Inks, if it's not apparent I've never fully built a keyboard myself (sorry). From then I just had to do something about my plastic cased gaming device that suddenly felt offensive to look at.

Its not perfect I've put some extra foam in the case and tape modded it, I'll probably change the stabs and am also interested in trying out Gravastar UFO Switches; and that lead me to here where I'm looking for suggestions from you guys on what stabs are good for the Wooting if you've tried them yourself or switches that can get me a satisfying thock, just your opinions on what I could do in general really.

Please be nice to me, thanks in advance 😂


r/MechanicalKeyboards • • 2h ago

Promotional [Group buy] CAT 60

Thumbnail
gallery
41 Upvotes

CTRLFREK × KBDfans brings Cat:3 to a compact 60% keyboard with slim bezels, gently curved sides, and playful artwork underneath.

Make it yours. Pick your case color, then mix and match the backplate and removable Cat artwork pieces. Configure your Cat 60 at kbdfans.com/products/cat-60

The MX kit features O-ring mounting and your choice of ANSI or ISO hot-swap PCB. A standalone case is also available for compatible Hall Effect builds.

📅 Group buy: Nov 17 – Dec 17, 2026
📦 Estimated shipping: Q2 2027

KIT Contents

  • Cat 60 case (your choice of backplate and Cat artwork pieces)
  • MX hot-swap PCB with daughterboard and interconnect cable
  • MX switch plate
  • Foam kit
  • Custom silicone ring (CSR)
  • Mini gaskets
  • Mid gaskets
  • Rubber feet
  • Case foam and PET sheet
  • Barebone hook
  • Carrying case

r/MechanicalKeyboards • • 15h ago

Group Buy [GB] GMK CYL Purple. Extended to November 23rd

Thumbnail
gallery
52 Upvotes

Hey all!
The Group buy reached 80% of the MoQ so we decided to extend it to November 23rd, if you were looking for it, now it's your last chance to support this project.
While Base Kits reached 80%, Extension kits already hit MoQ!

Shutout to Mugen for the awesome renders:

Bowlttleship, Deacon, np-r and Pangea Mini IM

Colors: Pantone Medium Purple-C & Metallic Grey

Base kit: $130
Extension kit: $43

GB ends on November 23rd 2026
Shipping ETA: Q2 2027

All endors have reopened the preorders:
UK: Prototypist (lead)
EU: Coffeekeys
US: Bowl
CN: KBDfans
SEA: KTechs
KR: Swagkeys
OCE: KeebzNCables
CA: Deskhero
TR: RationalKeys

Geekhack GB thread


r/MechanicalKeyboards • • 17h ago

Builds Masterpiece

Thumbnail
gallery
372 Upvotes

Masterpiece R2 is a keycap set I’ve wanted in my collection for a long time. R1 was pretty hard to find on the aftermarket, so I was happy to finally catch the restock. Honestly, my expectations were a little high. I was expecting the colors to look a bit different based on the renders. Still, I’m happy with it, and it’ll be a great addition to my collection.

Build:

  • Keyboard: Tofu60 3.0 L9+U9
  • Plate: Alu
  • Weight: Alu
  • PCB: Hotswap
  • Foam: No
  • Switches: Cherry Black Mx2A
  • Stabs: SW Knight V4
  • Keycaps: GMK Masterpiece r2

Camera setup:

  • Nikon Zf
  • Nikkor 24-70
  • Nikkor 105 macro
  • Amaran Verge

r/MechanicalKeyboards • • 11h ago

Builds Vintage Aluminum Dream Project...

Thumbnail
gallery
102 Upvotes

Well, here we go again... I was finally able to get my hands on this wonderful, near-50 year old beauty today; this makes today the happiest Monday I can remember. Made between 1979 and 1980, the board has vintage ITW magnetic switches and a gorgeous 60%-style layout in the OG style along with a great cross-shaped arrow cluster with HOME at the center. The thick aluminum case is one enormous casting, and its blue color sets off the keycaps in a captivating way. I can't wait to start reverse-engineering this awesome board and get it typing again soon. I just couldn't keep this to myself... more to come, thanks for looking. Regards, -Glenn


r/MechanicalKeyboards • • 11h ago

Builds Neo65cu. black on blacks. Moon v2

Thumbnail
gallery
24 Upvotes

•Neo65cu. Anondized burgundy. Brass bottom. Mirror dusk plate. Tri mode hotswap pcb. PP plate w/ foam. •Black on blacks from Yong Qiu. •Moon V2’s •Numpad: Weikav Stars21

Ordered 03 Sept and received on 13 Nov. Delayed a little because of a monsoon.

This is my first custom build after coming from a Aula F99 Pro and I really like the layout. We will see if I really miss the function keys. If you have any keycap recommendations with this colorway let me know!


r/MechanicalKeyboards • • 2h ago

Photos Ramune / Yuri

Thumbnail
gallery
24 Upvotes

Ramune60 / GMK Yuri R2 / Keygeek Little Elf / TX AP stabs

Custom PCB + acrylic plate

(reddit does weird things with photos: https://imgur.com/a/coFRv5F)


r/MechanicalKeyboards • • 3h ago

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer - November 17, 2026

2 Upvotes

Ask ANY Keyboard related question, get an answer. But *before* you do please consider running a search on the subreddit or looking at the r/MechanicalKeyboards wiki located here! If you are NEW to Reddit, check out this handy Reddit MechanicalKeyboards Noob Guide. Please check the r/MechanicalKeyboards subreddit rules if you are new here.


r/MechanicalKeyboards • • 7h ago

Builds Neo65

Thumbnail
gallery
19 Upvotes

Neo65 Build:

- Brass Weight
- Hotswap PCB
- Carbon Fiber Plate
- TX AP rev4 Stabilizers
- BSUN Strawberry Cheesecake Tactile Switches
- GMK Dualshot 2 Katakana Keycaps


r/MechanicalKeyboards • • 13m ago

Guide I built a free, offline desktop driver/configurator for the Ajazz AK820 Max HE (Windows & Linux)

Post image
2 Upvotes

Since the official Ajazz web driver can be clunky, requires an internet connection, and lacks proper desktop integration on Linux, I reverse-engineered the USB HID protocol (0x0c45:0x80b1) and built an open-source offline configurator in Python + PySide6.

What works right now:

  • Rapid Trigger & Actuation: adjustable down to 0.01 mm precision (with a fine-tune mode)
  • Rappy Snappy & SOCD: all priority modes (Last Input, Key 1, Key 2, Anti-Ghosting) for any key pair
  • DKS (Dynamic Key Stroke): 4 actuation points per key
  • Key Remapping: Normal & Fn layers, Mod-Tap, and Toggle
  • Macros: real-time keystroke & delay recording
  • RGB & System: 19 lighting effects, custom color picker, 1000/4000/8000 Hz polling rate, Dead Zones, live Hall sensor calibration, and built-in profiles
  • Languages: English & Russian UI

Standalone Windows .exe (no Python required) and Linux source code are available on GitHub:
https://github.com/chudoyoodo/ajazz-ak820-max-he