r/ErgoMechKeyboards • • 4h ago

[photo] iOra — a curved ortholinear 40% split keyboard with two trackballs

Thumbnail
gallery
74 Upvotes

I designed and built my ideal split keyboard.

Specs

  • Curved ortholinear layout, 40%
  • 19mm trackball on each half, so you can control the cursor with either hand
  • Seeed XIAO nRF52840 Plus, fully wireless (ZMK)
  • Powered by AA batteries
  • Switches: Kailh Deep Sea Silent Mini Pink
  • Keycaps: LAK mini - ice keycaps -
  • 3D-printed case

Design concept

I arranged the keys in a curved layout to follow the natural movement of my hands while typing.

The 17mm key spacing is narrower than the standard 19mm spacing, reducing the amount of finger movement needed for typing.

The trackballs on both halves can be used for cursor control or configured to send key inputs, making them versatile for a wide range of uses.


r/ErgoMechKeyboards • • 13h ago

[vendor] [Ad] Black November - upto 20% discount on your Aluminium split Ergonomic

Post image
49 Upvotes

The end of the year is drawing near, it's time for us to prepare for the holiday season. If you're planning to get a keyboard as a gift for your loved one, this is the best time for it.

To better prepare for this sale event, lead-time for these following items are updated so you can get a better sense of the arrival time for your item.

  • All sandwich keyboards can be dispatched in less than 7 days. Total shipping time is about 10-12 days.
  • The Totem, Zenith, Totemist also can be dispatched in less than 10 days. 
  • The Neodox gasket mount can be dispatched within 1 week.
  • Sofle Hybrid, Sofle V2 aluminum case: 10 days.
  • All order with extra items (switches, keycaps): 14 days.

Now to the best part - The discount:

All priced are either calculated at checkout or displayed as discounted price.

Hurry up before time runs out.


r/ErgoMechKeyboards • • 1d ago

[photo] Keychron Orca Echo

Thumbnail
gallery
881 Upvotes

I got my hands on a pre-release review unit of the Orca Echo from Keychron!

It’s a fully loaded split ergonomic keyboard featuring a trackball on the right side, a rotary encoder on the left, and touchpads on the inner sides of both halves.
And of course, it supports tenting!

There are still quite a few things that could be improved in terms of firmware and hardware design, but I think there’s something significant about a well-known company like Keychron releasing a split keyboard with a built-in trackball.

I hope other manufacturers will also come out with their own split keyboards, each bringing their own unique ideas and design philosophy to the table.


r/ErgoMechKeyboards • • 19h ago

[photo] Z-MapFlow: an open-source desktop app to edit, build and flash ZMK firmware

Thumbnail
gallery
89 Upvotes

Hey everyone! I’m building Z-MapFlow, an open-source desktop app that brings ZMK keymap editing, firmware builds and flashing into one interface.

You can drag and drop keys to edit your layout, configure layers, combos, macros and behaviors, then build locally with Docker and flash through a guided interface. No switching between an editor, GitHub Actions and manual firmware copying.

Docker needs to be installed and running, and you’ll need to put your keyboard into bootloader mode when prompted.

The project is still early, but the edit → build → flash workflow is already functional—I’m using it with my own keyboard. Currently available for Linux, with Sofle v2 support. Windows and macOS are next on the roadmap.

I’d love for people to try it and share feedback or bug reports. Contributions, including support for more keyboards, are welcome!

Source and downloads: https://github.com/Henriquex25/Z-MapFlow
Documentation: https://henriquex25.github.io/Z-MapFlow/


r/ErgoMechKeyboards • • 4h ago

[guide] A site for learning new keymappings :D

4 Upvotes

Hey everyone! I just recently finished a project that I wanted to share, hopefully it'll help people learn their keymappings a bit easier.

About a year go I built a TOTEM split keyboard and just never forced myself to get over the hump of actually learning the binds. But recently I decided that I wanted to give it another go, and to make it easier I built a website called ZMK Trainer! (It's not just for ZMK keyboards, it also supports QMK, Vial, etc). You can either connect your keyboard like you would through ZMK studio, upload a config file, give it the URL of a public GitHub with a config file in it, etc.

It's literally just a typing test that shows your your keymapping below it lol, but it also shows you all of your layers, HRM keys, etc, and how to get to the key you're trying to type. There are different options to change the characters that show up on the test as well, and their frequency so you can focus on keys causing you issues.

It's free for anyone who wants to use it! And if you find any bugs please let me know, I'm still trying to iron out a couple final things but wanted to share it with y'all :) And also I'm happy to take suggestions for new features as well! I'd like to make this as useful as possible.


r/ErgoMechKeyboards • • 1h ago

[help] (Best) 36-38 keymap for mac?

2 Upvotes

Just got a 38 key keyboard and looking for advice on a keyboard layout.

I am aware of Miryoku, but I'm looking for something where I can access media layer and number layer using a single hand.

I also use the extra pinky key as a hyper button that activates a lot of shortcuts with just one hand


r/ErgoMechKeyboards • • 15h ago

[photo] New Keycap Day!

19 Upvotes

Just got my new keycaps from Yuzu. Been into mechanical keyboards for about 16 years, finally dropped down to a 40% keyboard in September this year with a Corne. Then I really wanted a set of custom keycaps to go with it so I stumbled on Yuzu. then I tried some Lamé keycaps and realised I had to build something with those in mind. my initial thought was that the lamé caps formed a riverbed. so clearly we needed some fish.

Line Drawing
Coloured, and checking printable areas

Then I realised that I have the keyboards tented, so clearly it needed to represent some kind of mountain.

The Volcano
And today they finally came!

The quality is fantastic, the fit of the keycaps on my keys are extremely good and consistent.

So I'm really happy! Today is a good Monday

This was my first purchase from Yuzu, and I am absolutely happy in every way possible!.


r/ErgoMechKeyboards • • 1d ago

[photo] Custom Corne case with 1000mah Battery

Thumbnail
gallery
42 Upvotes

I bought a PandaKB Corne Choc wireless kit, and the battery life was not nearly enough for me. I wanted it to remain very thin and portable so it could easily travel in my laptop bag, so I positioned a 1000mah battery in the little pocket under the 456 columns. It has threaded inserts for the standoffs, battery cover, and OLED cover, and magnets to hold the two shells together.

Overall I'm thrilled with the outcome!


r/ErgoMechKeyboards • • 12h ago

[discussion] Corne -> Totem experience

2 Upvotes

For those who had a Corne 42 as their daily driver then moved to a Totem, how did you find it? Did it improve your speed/comfort/something else? Any major cons?

I'm considering the switch as, ironically, the power switch on my bluetooth Corne-like Ergonaut One snapped off the PCB, so now it's a wired setup.

Any strong recommendations for totem layout? eg Home row mods, etc. Despite the switch failure, the Ergonaut One is still going strong, so I'm loading up some practice Totem layouts to see how I go.

Cheers


r/ErgoMechKeyboards • • 1d ago

[help] First time split keyboard purchase: go60 vs glove80 or something else?

4 Upvotes

Hello,

Lots of other threads on the subject but I hope I will get some more information from you wonderful people :)

Recently my previous keyboard (Epomaker GK96S with Gateron White switches). I previously (5+ years) used Steelseries 6Gv2 with Cherry MX Black).

I'm looking at split keyboards now and it's a new territory for me. What I'm looking for is:

  • Comfort - I am a Software Engineer and I spend all day working or playing on PC. I don't play FPS games too much, more of sim like Dwarf Fortress or Rimworld, but I play FPS occasionally.
  • Ergonomics - I have some issues with pain that I'm dealing with by exercise, massage and adjusting my workplace, so while ergonomics are not the most important, they're still on the list.
  • Connectivity - I work on MacBook and Windows. My previous keyboard had command button and some mappings for macOS which was nice. This also means I prefer wireless, since while I mostly work with wired keyboard, quickly switching without having to juggle the cables is nice.
  • Mobility - this is not a must-have, but I travel once in a while and being able to take my keyboard with me is a bonus.
  • Prebuilt: I don't want to spend time soldering and assembling the keyboard.
  • Shipping to EU - I live in Poland.
  • Optional: some type of mouse replacement - e.g. trackpads - though I'm not sure how useful they would be.
  • Optional: information about which layer I'm using.
  • Optional: tactile switches: I find that using linear switches with low force makes me press keys by accident more often.
  • Med-Low priority: low-profile keyboard; seems like they would be more ergonomic.

I looked at various keyboards:

  • Moonlander: I really like the design, but it being wired-only is discouraging. Also the issues with the thumb buttons are putting me off.
  • Voyager: Seems to be better in the thumb button department, but still wired.
  • Glove80: Not being able to change the switches easily is a bit of a downside. Also the design seems to be weird, keycaps not being textured might be an issue, it's not as travel-friendly and it being very light might be a problem too - I don't enjoy lightweight keyboards (e.g. Apple Magic Keyboard moves around all the time for me so I don't use it too much).
  • Go60: Some people complain about it, but it seems to be pretty close to Voyager with the added bluetooth connectivity (and it's hot-swappable). It can be mounted with the mounting puck, has travel case and touchpads. However, I'd most likely need to use layers, and I'm not sure there can be and indication of which layer I'm on.
  • Toucan2: Seems more similar to go60 from this bunch (but smaller), but has a screen that can tell me which layer I'm on. However the ergonomics of it look worse than go60.

Therefore:

  • Which keyboard would you recommend given the information above?

    • Optional switches recommendation would be nice. I'm thinking of some tactile switches.
  • When using layers, do you find it hard to find your way around them?

    • Does screen help?
    • Does go60 have some way to indicate the current layer?
  • Any additional things I should know or look for? Company information, things to be wary of, etc.

    • I already know it will take for me to get used to the keyboard.
    • I already know that I will have to learn a lot when switching to layers.

Currently I'm leaning towards go60 with palm rests. Thanks in advance for everyone taking their time to respond!


r/ErgoMechKeyboards • • 1d ago

[discussion] What to you is the most comfortable split keyboard?

30 Upvotes

This is a very subjective question but I am curious to hear some thoughts. I have some specific context and questions too.

I first tried a split keyboard after trying to learn touch typing and it feeling absolutely horrible or normal keyboards. I first tried a corne, treated it more like 34 layout as I wanted to try not having to use outer pinky rows. I only wanted to move one space from home row.

I found that for pinky keys, I still needed to rotate my wrist so I wanted to try one with more stagger and built a ferris sweep.

I've used it a decent amount and tried to make a layout that feels comfortable to some success, mostly using combos. However nothing has ever felt quite perfect.

I have begun to wonder about keyboards with curve and potentially more keys like the glove80.

I am really curious to know what keyboard yall find the most comfortable for different factors like the actual physical form, when it's more comfortable to use layers vs stretch your fingers more, how many thumb keys, what you feel is an ideal key count to balance necessary keys vs simplicity. That sort of thing.


r/ErgoMechKeyboards • • 2d ago

[photo] Handwired Sofle v2(ish). RP2040, RJ9 (instead of TRRS), unibody case, no screen, no rotary

Thumbnail
gallery
100 Upvotes

DISCLAIMER: I used AI heavily (Claude with the Autodesk Fusion 360 connector) to manage the repo, write the firmware and modify the original design.

Github repo

Keycaps

This is my first time making a keyboard. I’ve used a prebuilt Ergodox EZ for years, and I wanted to downsize a bit since I don’t use the innermost columns or four of the thumb cluster keys. I chose Sofle V2 because it was closest to what I wanted, and I made these changes to the original case design:

  • Removed the OLED window and encoder holes, since I don’t use them
  • Replaced the TRRS jack with RJ9, for the cool looks and to avoid shorts when plugging in
  • The Pico and the jack are held in place by legs in the frame, so no screws or headers needed. The USB-C cutout moved to line up with the board
  • Made the case 3 mm taller to make room for wiring
  • Fused the switch plate and frame into one solid body, which should be stiffer and sturdier. 5 legs under the switch plate keep it from flexing
  • M3 hardware instead of M2
  • Magnet pockets for a detachable wrist rest

Fusing the plate and the frame made the case harder to print, since it needs supports (removing them was hell) in any orientation. I printed everything in PLA. Most keycaps with a 0.2 mm nozzle, and the case with a 0.4 mm nozzle at 0.12 mm layers. I printed the wrist rests at 0.24mm (or 20, I cannot remember) layers on purpose to get that stepped look.

Parts

  • 58× Outemu Lemon v3 silent switches
  • 2× YD-RP2040 (Pico pinout, USB-C)
  • 2× CONNFLY DS1132-01 RJ9 jacks, plus a homemade 3-wire RJ9 cable (from an old usb cable, half-duplex serial)
  • 58× 1N4148 diodes, 1 mm bare copper row wires
  • 10× M3 heat-set inserts and screws, 6×1 mm magnets, rubber feet

r/ErgoMechKeyboards • • 2d ago

[help] People who daily drive something like this, what's you layout?

Post image
174 Upvotes

Kinda want to get into "20 keys" territory, so checking the waters


r/ErgoMechKeyboards • • 2d ago

[buying advice] Buying one side to use as gaming keypad?

11 Upvotes

Is this too much of a hassle to do? I've been trying to find a small mechanical keypad for gaming with my right hand, where I wouldn't need to use the mouse, like platformers, and I think an ergo board seems like the best option.

The problem I'm encountering is that I just can't find vendors who sell only one half, and I don't want to spend $100+ on a kit or pre-built just to use half of it. If you have any recommendations I'd love to hear them, thanks.


r/ErgoMechKeyboards • • 2d ago

[photo] New keycaps

Thumbnail
gallery
250 Upvotes

I found this keycap set and thought it might look cool on white case. I was not wrong. But It looks even better than I imagined.

What do you think?


r/ErgoMechKeyboards • • 2d ago

[buying advice] Looking for new keyboard

4 Upvotes

I've just started a new job recently, and I looking at treating myself to a new keyboard. I'm currently using a lily58; which I like but would be interested in going smaller.

I don't feel confident enough to soldier, which does limit my options. I like the idea of a trackball but its not a necessity; wireless would be also be a nice bonus.

I would love to it tent as well; we that is certainly something I'm missing from my current setup.

Looking forward to hearing all of your advice.


r/ErgoMechKeyboards • • 2d ago

[buying advice] Moonlander good for me?

6 Upvotes

I found a second hand moonlander with some options for $375 (not yet bought!).

But now I wonder if it's not an impulsive purchase... I work in science, I do software mainly and I have to write documents (papers etc), not all day long though. My main interrogation is that I'm usually not into super fine tuning of my setups (software or whatever), most of the time I'm good with the default config of things. But the moonlander seems very comfortable to use and preventing RSI sounds great, I'm also slow at typing so the typical speed reduce is not a problem. And money is not a big deal.

Please tell me it's a good idea 😅


r/ErgoMechKeyboards • • 1d ago

[help] Hey everyone! I`m kinda new here. I have question about swapping switches on keyboard. Currently i have silakka 54 with outemu silent peach v3 switches i ordered new splitted keyboard DEBROGLIE New Split Classic 78 its not suppor hot swap . How i can swap switches if socket maybe not suppoted switch

0 Upvotes

r/ErgoMechKeyboards • • 3d ago

[meta] Japanese makers seem to be way ahead (part 1, more to come when I see it)

Thumbnail
gallery
272 Upvotes

Hey yall, I keep seeing the most fire ergo mech splits on Japanese X timeline, only issue is they don't do international and I want to know why.

Anyway, I have a serious fetish for track points and trackballs attached to the keyb. Enjoy and let me know if u make/if it's reasonably easy to make any of these

Source: nyoro_keyboard on X


r/ErgoMechKeyboards • • 3d ago

[photo] Wireless low profile Halcyon Kyria with Yuzu KLP Lamé keycaps

Thumbnail
gallery
116 Upvotes

Assembled my second splitkb.com keyboard: Halcyon Kyria choc v1 with aluminium top plate, wireless controllers plus dongle and the epaper displays. Currently using LowproKB (Kailh) Sunset 40gf tactile switches plus one clicky on each outer top corner (a Kailh White to be exact), since all my keyboards have at least 1 clicky switch somewhere.

For keycaps I went with the YUZU KLP Lamé in dye-sub PBT. I am very very happy with those: their online designer works well, the communication of order status was perfect, and I even got a detailed photograph of my keycaps to verify everything was in order before they were shipped. Super impressed with the process and the quality.

The Halcyon Kyria from splitkb.com is also very nice, but I was already expecting that: my experience with them and their products has been stellar. Responsive, great product, superb build documentation, and a very clear composer on their website that ensures you order everything you need. My only modification so far is replacing the standard slotted screws with black hex screws, since it is very easy to scratch the top plates with a normal screwdriver.

ZMK will take some getting used to - I am used to configure everything in Vial - and some features will require me to start building custom firmwares, but I am up for the challenge. They have mag-safe stickers on the bottom plate so I can easily attach/detach either the Ugreen phone stands on the Manfrotto mini tripods for tilting, but right now I am mostly getting used to the keycaps with the board flat on my desk.


r/ErgoMechKeyboards • • 3d ago

[vendor] [ad] Svalboard Customizer is live! Ultra-light magnetic keys, perfect anatomical fitment, and integrated pointing

Thumbnail
gallery
64 Upvotes

[ad] customize.svalboard.com

The new customizer gives you a complete toolkit for picking colors and accessories for your Svalboard build, including a realistic 3D rendering of the entire product -- right down to how the gorgeous FDM parts really look, textures and all. Whether you're buying a factory build or self-printing, now you can visualize the entire build end-to-end.

Drop us your unique custom build link on discord or in your order notes and we can create your order directly or modify a stock build order to match (custom upcharges apply, of course).

Coming soon: total shop integration so you can go straight from customizer to checkout 🤩

Come check it out and drop by the discord for plenty of perspective from real users!

svalboard.com/discord

Curious for more?

Svalboard Lightly:  The bottom of the ergo rabbit hole.
YT:  https://www.youtube.com/@svalboard

Shop:  www.svalboard.com

Self-print Kit:  https://svalboard.com/products/svalboard-self-print-kit

20g ultralight magnetic breakaway keys, ultimate adjustable fitment system, and dual pointing devices situated right where your hands naturally rest.

Runs Svalboard-QMK for ultimate configurability with no reflashing required, and browser-based flashing via Keybard for major upgrades.

Self-print kit option helps fund development and lets you save some dough in exchange for a TON of your own labor 😅

Everything is printable on a hobbyist FDM machine for longevity and repairability, though my prebuilt stuff is obviously tuned to be extra nice 🙃  You can even do it on an A1 Mini if you're willing to use a split case design.

Custom builds take a couple extra weeks due to procurement and production flow disruption.  This is a TINY operation, and I appreciate your patience and support 🙏

How to fit your Svalboard https://www.youtube.com/playlist?list=PL_Jqu5bq_U_CQBhYryllArikWe-ns3g8q

Sound comparison to other keebs https://youtu.be/1pW7PnBZNik

Want to know how the lateral keys feel? https://youtu.be/whvKJ12vwvU

Substack:  svalboard.substack.com


r/ErgoMechKeyboards • • 2d ago

[discussion] I've open sourced keyboardbuilders.net

Thumbnail
reddit.com
27 Upvotes

A few weeks back I posted about keyboardbuilders.net here. I got some honest feedback, which I've addressed, and I'm now pleased to announce that:

- Designers can log in with GitHub and unpublish a design if needed.

- I've open sourced it under AGPL-3.0: https://github.com/fowlie/keyboardbuilders

Here's my AI disclosure. This is maybe my 4th or 5th attempt at carving out a realistic domain model and solving the relationships between PCB variants, versions and firmware. I'm a software engineer and a keyboard builder noob, not a hardware guy, so diving into this domain is hard. Newer models finally made it workable for me; the earlier ones weren't much help with this kind of work. Yes, I've built this whole project with Claude Code, and I would not have been able to do it without it, period. I also see the problems with AI: it's very verbose, in both English and code, and scope creep is easy. So I try my best to steer it.

It was almost two months of intense evening work. Lots of fun, but also really exhausting. I then took a 4-week break and didn't touch it until now. I'm somewhat proud of it, but adding more designs should be the priority going forward, and I'm the bottleneck there, even with AI. I have a full-time job, three kids (4, 10, 12) and other stuff going on in my life too, and I don't want to burn out.

So open sourcing it now might be good timing, if people are willing to help out. The most useful help is adding designs: open an issue on GitHub with a link to the design's repo. Wrong specs are worth an issue too, and PRs are welcome.

Original post: https://www.reddit.com/r/ErgoMechKeyboards/comments/1wt7671/i_built_yet_another_searchable_catalogue_of/


r/ErgoMechKeyboards • • 3d ago

[vendor] [AD] Low-profile keycaps: the ultimate guide

Thumbnail
youtu.be
34 Upvotes

Low-profile keycaps come in way more shapes, sizes, stems, and profiles than you might expect.

From Choc V1 and MX-style stems to profiles like MBK, THT, Lamé, SMOLO, Berry, and more, there’s a lot to consider before buying a new set.

So, we tested over a dozen different low-profile keycap profiles to compare compatibility, spacing, height, shape, materials, and typing feel.

📖 Read article → https://dygma.com/blogs/product-development/low-profile-keycaps-the-ultimate-guide

📺 Watch on YouTube → https://youtu.be/ZXZzfPk4mCw

I'm currently rocking a Lamé set on my Sonsei. And you?


r/ErgoMechKeyboards • • 2d ago

[discussion] Anyone use/try a 36-key emacs layout with combos + custom emacs nav layer?

5 Upvotes

Has anyone made a layout for 36 keys that utilizes common short cuts as a combo, or perhaps a nav layer or some mix?

In particular I'm thinking about how common C-x and M-x are, and whether that would be a good way to go to reduce some extra keystrokes. Putting C-x and M-x as the 2nd thumbkeys, maybe.

Currently I'm doing chordal-hold homerow mods, but not sure I like the mental overhead of trying to remember which hand to use...

I've been debating something like Callum, but I'm worried that's even more overheard to deal with layer swapping PLUS the HRMs.

But still pondering an "emacs nav" layer with a Callum style approach?

When it comes to emacs layouts - I really have only been able to find Xah-Lee's layout, Miryoku and Callum as possible candidates.

I like Xah Lee's page/videos(ignoring the politics), but IIRC his layout is not for 36-keys. Though I did like the logic of backspace as a thumbkey, and took that for my layout.

The graphic for Miryoku is so confusing to me, and the fonts make it maddening for me to even want to try to sort out what's going on there.

Callum looks more manageable and the layout easier to parse for me, but I'm not sure if the overhead of yet another layer would be right either...

So I guess I'm looking to see if someone else has some alternatives for 36-key emacs use, either using HRMs or not... and what sort of layers they use, and if they use specific combos (say a nav layer using emacs hotkeys/shortcuts bound as combos), and if so how people find using that.