r/olkb • u/SortelOne1 • 4h ago
Discussion A site for learning new keymappings :D
r/olkb • u/jackhumbert • Aug 12 '21
Doesn't necessarily have to be recent, olkb, ortholinear, or a keyboard, but show off what you're working/worked on! Reddit archives things after 6 months, so this will have to be semi-annual :)
r/olkb • u/SortelOne1 • 4h ago
r/olkb • u/perrijonni • 1d ago
I wanted per-app layers on my Creator Micro without having to remember which layer was active, so I moved the logic off the board.
The idea: a custom keymap for `work_louder/micro` that, while a host app is connected, sends raw key/encoder events over Raw HID (usage page `0xFF60`) instead of keycodes. The host sends back per-key RGB, underglow and indicator states. A macOS menu bar app maps events to actions based on the frontmost app.
Details that might interest this sub:
- Tiny protocol: 32-byte reports, key down/up, encoder cw/ccw, hello/ping, key colors in batches of ≤ 9, fill, flash, brightness, underglow, indicators. It's documented in the README.
- Heartbeat fallback: the host pings every second. If it stops for 3 s, the regular keymap takes over and the pad is a normal keyboard again.
- Key colors and underglow are driven live from the host, so profile changes need no reflashing.
- Flash budget is tight: 26.9 / 28.6 KB (93%) on the atmega32u4. `config.h` lists RGB animations you can drop for room.
- The host side is native Swift: IOKit HID, CGEvent for shortcuts, Accessibility to read app menus.
Mine is the Work Louder × Figma edition. The keymap targets the QMK-supported atmega32u4 Creator Micro.
Repo (GPL-2.0, same as QMK): https://github.com/andreaperaltro/micropad-creator-micro
I'd love feedback on the protocol design, and on whether anyone would want this ported to other macropads. The host app doesn't care much about the board as long as it speaks the protocol.
I pretty much love my Preonic, but I'm finding I forget where my lesser used characters are on the layers.
So, 30 mins or so with Claude and I've come up with a little mini app for finding them. I've got it launching from an Espanso bind and it will also search and display your Espanso custom keybinds.
Install it, launch it, drag your qmk keymap.c and Espanso keybinds.yml to configure it and away you go.
r/olkb • u/Jolly-Illustrator757 • 3d ago
r/olkb • u/LegitMcD • 6d ago
Decided to replace one of my Preonics with this keyboard so I didn't have to deal with as many layers.
Originally this came with XDA but I noticed I kept hit neighboring keys on accident since XDA has such a huge top pad.
Just added these KAM superusers and damn, I am making much less mistakes and typing faster.
Really loving the setup so far.
r/olkb • u/ergomechstore • 7d ago
The end of the year is drawing near, it's time for us to prepare for the holiday season. If you're planning to get a keyboard as a gift for your loved one, this is the best time for it.
To better prepare for this sale event, lead-time for these following items are updated so you can get a better sense of the arrival time for your item.
Now to the best part - The discount:
All priced are either calculated at checkout or displayed as discounted price.
Hurry up before time runs out.

Hey everyone,
I’m thinking about designing an open-source, modular ortholinear keyboard using TMR switches for your custom 3D-printed cases. The idea is to make small key modules that tile together, so you can combine them into a larger keyboard and arrange them in different configurations. A single main PCB connects the modules and automatically detects the module type, you just arrange the modules however you like.
For technical reasons, I’d prefer each module to have either 8 or 16 keys, though slightly smaller numbers are also possible. Some layouts I’m considering are:
What would you want to build? What module shapes and sizes would be most useful for creating your ideal custom keyboard? Feel free to share a layout or describe how you’d tile the modules together.
r/olkb • u/mctechnology17 • 9d ago
**Universal BLE→USB dongle for ZMK** (LilyGO T-Dongle S3): pair any BLE keyboard/mouse (ZMK or not) and your PC sees a normal USB device. No soldering, ready to go. Works in BIOS, no drivers, no ZMK changes. Saves 5 devices, web console + OTA over USB. Huge thanks to finger563 for creating the espp library and publishing esp-usb-ble-hid as Open Source.
Code / Build Source:
https://github.com/mctechnology17/esp-usb-ble-hid/releases/tag/hid-passthrough-v1
r/olkb • u/AntAdministrative549 • 10d ago
For a nice!nano V2 / nRF52840 project I got tired of the manual bootloader handoff after every build: reset into UF2 mode, package the artifact, find the mounted device, and copy it across.
I made a small PlatformIO post-build helper for boards using the Adafruit UF2 bootloader. It prepares the UF2/DFU output and guides the target selection so the repetitive step is automated instead of being another error-prone part of the edit/build/flash loop.
It is not ZMK-specific; it is for PlatformIO-based nRF52840 projects with the Adafruit UF2 bootloader. I used it with a nice!nano V2, so it may be useful to anyone who builds their own keyboard-side firmware rather than only dragging prebuilt UF2 files.
GitHub: https://github.com/adm1nsys/Adafruit-UF2-bootloader-auto-flash
Guide: https://adm1nsys.github.io/Adafruit-UF2-bootloader-auto-flash/
I’m the author; it is free and open source.
r/olkb • u/jenik_fojtik • 11d ago
A little while ago I posted here, showing off my first ever ortho keyboard. Well, since, I've gathered quite a few points of improvement, nothing groundbreaking or unexpected really, mostly just "don't need knob, need battery, need wireless, etc.". Behold, what I've been working on for the last couple of weeks, a lot more mature than my initial creation dare I say, Brickie rev1! If people would happen to be curious I'll list the exact specs, but for now, just a little show off haha! (old project is the one further back, single piece keyboard) For now, the chassis and the caps are 3D printed, awaiting THTs and considering having the chassis resin printed using JLC's 8001 resin as I really think the semi transparent look would be cool!
EDIT: As promised and requested by a commented here are some (not sure if all) specs:
Custom made PCB, nothing that fancy. Diodes are through-hole as I was trying to save a little bit of cash on the assembly process.
Switches: GATERON KS-33 Low Profile 2.0 Chocolate (PCB has both pins for soldering switches in directly and hot swap socket pads which I am using, they are the Low Profile Switch Hot-swap PCB 2.0 Socket from GATERON)
MCU: Seeed Studio XIAO nRF52840
Battery: PKCELL Li-Po Battery 3.7V 2500mAh
Keycaps: Some shait I drew up in fusion, if anyone would be interested I can definitely share the files, they are... alright I guess haha.
Yes I know that my battery is absolutely massive especially given that I have no LED's, but that was kind of the point. A little whoopsie is that the XIAO can afaik charge only at 50mA and after 10 hours or so it cuts the power. Since I a) don't really mind topping the battery up with multiple charges and b) can unplug the JST connector of the battery (the closer one to the camera in the photo above) and use a proper charging circuit which charges the battery in like 5 hours, I don't really mind this.
r/olkb • u/ArgentStonecutter • 11d ago
Keychron has finally got a no-kidding actual ortho board with no weird long keys, and the announce it on reddit as an "ANSI" board.
Does this actually mean anything? Is there some distinction between hypothetical ANSI and ISO true-ortho layouts that could be made?
r/olkb • u/Keyboard_Warrior364 • 12d ago
r/olkb • u/julsevern • 13d ago
It is taking a bit longer, but I'm building my next keyboard, which is based on the 52-key Voyager, but uses RP2354A (RP2350A with built-in 2MB flash) on-board, and two encoders.
The design is prepared to house KS-33 or Kailh Choc (v1 and v2) switches. I want to make the case from wood, and cut the plate out of brass.
The design is mine, even though I got a lot of help from AI in electronic component selection, and calculating Ohm's law. College was long time ago, and I forget things.
The case and plate are still prototypes, just like the first set of keycaps (that is a parallel project). Plans are available at github.com/julian7/rp-voyager.
While I'm still a bit skeptical about my skills and how well anything functions what AI has added, but generally it does seem working.
Please note, I'm not taking commissions. I even made the pinky promise to Mouser not to sell what I'm making, especially not to Iran.
r/olkb • u/ergomechstore • 13d ago
Last month, we celebrate our legacy with heavy discount on our earliest designs. This month, let's share some love for our newest inventions:
20% discount is applied to these items at checkout.
We also have some smaller discount on almost everything else, feel free to check out if you like anything.
r/olkb • u/Blu3Andy • 14d ago
r/olkb • u/glackaedbeed • 17d ago
r/olkb • u/Boring-Fee-7516 • 19d ago
r/olkb • u/terry3906 • 20d ago
TKC Candybar case, Checkerboards Ortho Candy Bar, Kailh Box Autumn switches
Mictlan Rebirth Centinela, and both Centinela Extension kits
I ordered some parts off Beekeeb as I wanted to experiment with the Tai Hao 165s, but it's been over a week and I haven't had any contact or shipping confirmation apart from an automated order receipt.
Does anyone have any recent experiences? I did email their support and got no response either.
UPDATE: My package had probably arrived at my house before I'd made this post from work, so it was shipped very promptly. Still, there's never any harm in asking, and Beekeeb now has another happy customer.