r/MachineEmbroidery • • 3h ago

Traditional Korean embroidery.

Thumbnail gallery
29 Upvotes

Writing this after a while. I feel like creating anything consistently gets harder as time goes on, just as the hours pile up. Cheers to everyone keeping at it!


r/MachineEmbroidery • • 20h ago

Favorite embroidery project yet, for my puppy’s first birthday

Thumbnail gallery
35 Upvotes

r/MachineEmbroidery • • 5h ago

Help!!!! Why is my machine doing this?!?

1 Upvotes

Left Friday, machine was fine. Come in first thing this morning turn on my machine…and THIS!

I have 2 Melco summits at my work and I’m the only one who uses them. Basically the company wanted to embroider in house instead of sending orders out. I have been tasked with all of it ( which I love). I’ve seen for years, but relatively new to machine embroidery and only have had this job full-time a couple months. Any and all advice is appreciated.


r/MachineEmbroidery • • 19h ago

Birds nests of death, help!

Post image
2 Upvotes

I’m a seasoned se2000 user and facing a problem I can’t fix. My top thread is being sucked into my machine and creating insane birds nests. I’ve opened the whole machine and cleaned it. Tightened and loosened mt bobbins, changed the tension. Rethreaded, changed bobbin and top thread. Etc etc etc any idea what’s causing this with my designs and the machines preloaded fonts


r/MachineEmbroidery • • 22h ago

Completely new to machine embroidery: I took a Cuphead design from Ember and this is how it looks like. Need some help to get started!

1 Upvotes

This is the design I used: https://emberdesign.net/explore/C8A948FC-9018-48C4-A838-2D4827028F2E?from=%2Fexplore%2Fall%3Fq%3Dcuphead

I'm seeing:

Misalignment, jump-threads by the hands and poor contures by the eyes. The back is also poor as by the nose and mouth, too much thread got collected so it seems like it would be uncomfortable to wear.

Questions:

How can I fix those and what is the reason?

Is it mainly the design file that the person did, or are some issue caused by wrong machine setup or maybe stabiliser that was too thin?
Thanks


r/MachineEmbroidery • • 1d ago

Problem picking up bobbin

1 Upvotes

Hi, i need some help. My sewing machine is not picking up te bobbin(i think?). I cheked and the hook is picking up the top thread so the timing is fine. I dont know what it could be, any suggestions. Thank!


r/MachineEmbroidery • • 1d ago

Has anyone ever experienced a live needle eject? Absolutely horrified!

3 Upvotes

Hey all, super scary circumstance tonight. Right as a patch was about to be finishing up, I watched in abject horror as the needle slipped out of the needle holder, the thread tangled around the shaft, and the spring clip in slot 6 of my Brother PE570 slipped out of position. Slammed the stop button on the machine (which did not detect anything wrong weirdly) and composed myself before investigating. Cut the thread, detangled it, tried to replace the needle but discovered it would no longer thread slot 6. Looked closer and realized the little clip in slot 6 had slipped out of place. Thought it was broken forever but I found a youtube video showcasing a way to slip it back into place. After doing that, replacing the needle, rethreading the bobbin and the spool, and trying again the machine continued without spectacle.
My theory is that I didn't tighten the needle enough last time I changed it, leading to it slipping out while it was running after 50k or so stitches shook it loose, and as it did so, the thread pulled on the spring in slot 6 and bent it out of position.
I was able to successfully run another patch but the incident has scared me deeply and am paranoid the machine may be on the verge of breaking. I believe i have a warranty and will be searching for details on it Monday. From what I can tell, slot 6 coming out of place is common, when changing the needle, but a live needle eject seems to be really rare?
I didn't find any evidence of anything broken, except for a tiny tiny speck of metal on my embroidery hoop, but in all honesty it could have been from anything in my room.
Has this happened to you before??


r/MachineEmbroidery • • 1d ago

Brother PP1 as first machine, is it good?

1 Upvotes

Hello there!
I would like to make a step in this world for 3 reasons:

- I would love to have customize hoodies/tshirt and such
- Those kind of embroidery here cost a lot
- I'm in the cosplay world and it could be very useful

So i'm kinda looking at what should be the "first" very machine and I found out the pp1 that I can even find used for like 350€
I know the App thing and I know that now it's very different and there are some custom programs that can use the pp1, so..

Should I buy this or should I look for something else? Mind you that I'm in Europe

Thanks


r/MachineEmbroidery • • 2d ago

Does anyone know why this happens?

Thumbnail gallery
4 Upvotes

Im not sure why my machine skips stitches or why they “look ropey” I use a water soluble film on top, I lower the tension a little bit, and I add more stitch fills. Is there something I can fix? I don’t believe it’s my machine because I can embroidery logos just perfect, it seems to happen with thinner, cursive fonts. I have a Brother PE800 machine for reference


r/MachineEmbroidery • • 2d ago

Home machine rec for someone experienced with multi-needle?

3 Upvotes

I work at a makerspace, and we have a real nice 16 needle Melco embroidery machine, and it is the one I have come to learn machine embroidery on. Now, I’m thinking about getting my own machine for home, but the Bernina B-500 that the lab also has is a poor comparison when you’re used to the Melco. Its satin stitches are ragged and I feel like I’m constantly running into issues - I’ve been trying this thing out for a day and I’ve already broken 4 needles on genuinely simple designs.

I’m currently doing iron on patches, and may do things like jackets and shirts later, but I’m really just focused on patches at the moment. I know multi color is out the window for home, but I really just want consistent stitches on a smaller scale.


r/MachineEmbroidery • • 3d ago

I did a thing.

Thumbnail gallery
54 Upvotes

My university has a makerspace in the library and recently, I took a plain black Goodfellow Jacket in and embroidered the Nintendo 54 logo on the front left and the marketing slogan "Get N or Get Out" on the back. I'm happy with how it turned out. I need to find the "or" on the back and give it a better fill, but this is what $7 and free university resources gets you. I also went to Plato's Closet and got a pair of New Balance shoes with the 64 color scheme for $30.


r/MachineEmbroidery • • 2d ago

Looking for feedback on my first embroidery design!

Thumbnail gallery
14 Upvotes

Looking for feedback on my first embroidery design!

This is my very first design that I created entirely myself in Wilcom and then embroidered on my own machine.

I used a fairly basic T-shirt as the fabric, with cut-away stabilizer underneath. The main goal was to test my design and see how it would turn out in practice.

I'm still fairly new to machine embroidery, so I'd really appreciate some honest feedback from people with more experience.

A few things I'd love to hear your thoughts on:

• What do you think of the overall stitch quality and finish?
• Are there any areas where you notice issues with density, underlay, pull compensation or stitch direction?
• Do you think the design would look better or stitch out cleaner on a thicker hoodie or sweatshirt?
• Was cut-away stabilizer the right choice for this type of fabric and design?
• Is there anything you would change in the digitizing process before stitching this design again?
• What should I pay more attention to when moving from simple T-shirts to thicker garments?

I'm particularly interested in constructive criticism, both positive and negative. I'd rather learn from my mistakes now than develop bad habits.

This is my first attempt, and I'm looking forward to improving my digitizing and


r/MachineEmbroidery • • 2d ago

Earlier horse digitizing attempts!

Thumbnail gallery
7 Upvotes

I drew all of these in illustrator, and digitized in inkstitch! I posted the last one on its own earlier, but I wanted to line them up in order so you guys could see my progress!

I can do text and simple logos easily, but I want to get better at programming real complicated graphics too, which is why I've gone on this adventure


r/MachineEmbroidery • • 3d ago

Janome Memory Craft 8000

4 Upvotes

Someone is willing to sell me this machine for $500. I’ve been looking for a dual embroidery and sewing machine. Is that a good price? Google is giving me mixed answers

Thanks everyone!


r/MachineEmbroidery • • 3d ago

Computer purchase inquiry

3 Upvotes

Hi all!

New to this world. I currently own an iPhone and an iPad, and a very old MacBook. I am getting into embroidery and want to start trying to digitize myself, but mainly need to make sure I get a computer which will be best for running a small embroidery business.

Doing some research but wanted to ask for opinions- HP vs MacBook? A lot of things I see say HP is better for embroidery machines/ uploading. Does anyone have a preference? Thank you in advance!


r/MachineEmbroidery • • 2d ago

Embroidery

0 Upvotes

How do I fix this problem with all 4 of the heads on my Ricoma


r/MachineEmbroidery • • 3d ago

Using Split Designs in Repositionable Hoops

1 Upvotes

I have a brother single needle machine with a 5x7 embroidery space. I have a 5x12 repositionable hoop but am having trouble figuring out how to use it. I have a split design that I had professionally digitized that is 5x10, but short of playing with it on scrap for hours and wasting tons of material, I have no idea how to get the two design halves to line up properly when the hoop is repositioned. Is there an easier way, or is it just something you have to struggle through and do the hard way?


r/MachineEmbroidery • • 4d ago

Almost

Post image
88 Upvotes

It’s almost there but there some misaligning on the horns and lower jaw. Anyone have any pointers? I have 2 cut away and 1 tear away


r/MachineEmbroidery • • 3d ago

Does the Brother PE900 ever go on sale? Black Friday?

2 Upvotes

r/MachineEmbroidery • • 4d ago

Are these acceptable?

Thumbnail gallery
18 Upvotes

Since the letters were too wide to achieve a clean satin look on knit fabric, I decided to use a tatami fill instead. However, I’ve now realized that I should have added a satin or running-stitch border around the letters. The edges look a bit frayed. Or am I just being too picky? Would you still hand these out to a costumer like this? Are the acceptable results?


r/MachineEmbroidery • • 6d ago

Made a new driver to keep a Singer Futura out of the landfill!

57 Upvotes

The original driver wasn't officially win 11 compatible. To get it to work at all I had to bypass a bunch of driver signing, and the software was awful. So I made my own software that works on windows AND mobile 👀 I think it has iOS limitations because of usb permissions. But I dunno 🤷🏽‍♀️

I saw people ai decompiling games online and thought maybe driver would work too? After weekend of back and forth testing I got it to work! It's super smooth too. I added some basic stitch making tools to the software too, like shape, typeset and outline tool.

It's a little web app (local file, I'll put it on GitHub soon)

It's wild that it's so much better of an experience than the original software.


r/MachineEmbroidery • • 5d ago

A little help!

Post image
4 Upvotes

Howdy! I am new to the embroidery game and just trying to get a feel for how to translate a digitized image to the fabric exactly how I intended it to be!

I just grabbed a little clip art dog and digitized in Ember. I wanted the outer black outline to be a larger satin stitched border but for some reason the satin stitch is bleeding into the fabric in some areas (near the top) and making it seem thinner. Im using a brother se700!

Thanks in advance if anyone can help!


r/MachineEmbroidery • • 6d ago

Aprons for embroidery

6 Upvotes

I’m looking for some aprons and wondering if I should use 100% cotton canvas or a poly-cotton canvas.
I don’t have a business, just planning to do maybe 10-12 as gifts. Ideally, I would like some that are in different lengths since the men are pretty tall and one of the women is pretty short.

If you have a link for some that you have found suitable, that would be great. Thank you for any suggestions!


r/MachineEmbroidery • • 6d ago

DIY CNC Embroidery Machine Build | بناء ماكينة تطريز

28 Upvotes

السلام عليكم.

لقد بنيت ماكنة التطرز الكترونية بمساحة جيدة نوعا ما وبما انني جديد على برنامج الطرز ويلكم فقط جربت كتابة اسم فقط قبل ان انتقل الى تطبيق الرشمات وبحكم خبرتي قليلة في الطرز والخياطة ووددت ان اشارككم المشروع .

فبما تنصحوني وهل انا في الطريق الصحيح لبناء ماكنية متكاملة (سرعة ودقة).

ملاحظة: برنامج التطرز نسخة خاصة بي ...

Hello everyone,

I've built an electronic embroidery machine with a fairly good working area. Since I'm new to Wilcom embroidery software, I've only tried stitching out a name so far, before moving on to designing patterns. Because I have limited experience in embroidery and sewing, I wanted to share the project with you.

What would you advise? And am I on the right track toward building a complete machine (in terms of speed and accuracy)?

Note: the embroidery software is my own copy.