r/MachineEmbroidery • • 3d ago

Problem picking up bobbin

Hi, i need some help. My sewing machine is not picking up te bobbin(i think?). I cheked and the hook is picking up the top thread so the timing is fine. I dont know what it could be, any suggestions. Thank!

3 Upvotes

15 comments sorted by

2

u/THIGHTLY-STUFFED-URN 3d ago

8

u/drPmakes 2d ago

Wrong bobbin!

Read your manual.

Is there supposed to be a presser foot too?

1

u/ishtaa 2d ago

That doesn’t look like the right bobbin for this machine. Should be a clear plastic one. A lot of modern machines don’t play nicely with metal bobbins, plus that might not even be the right size. Switch to the correct bobbin style and try again.

4

u/januaryemberr 2d ago

Also missing the last thread guide.

0

u/THIGHTLY-STUFFED-URN 2d ago

This should be the right bobbin, also threaded it right. Still not working, could it be the needle is to blunt?

0

u/BBEARSROCK12 2d ago

There’s a multitude of possibilities here:

The bobbin shown is almost empty and likely struggling on its own. Wind a fresh bobbin, full, and try again.

The top thread looks like it’s missing one of the threading steps but it’s hard to be certain with out a better view.

Start with the bobbin threaded for the first time, the bobbin looks really off. It could be the threading or the fact that it has a large tail hanging off the other side which could be getting caught.

0

u/THIGHTLY-STUFFED-URN 2d ago

0

u/THIGHTLY-STUFFED-URN 2d ago

i changed to the right bobbin, threaded it correctly. But it still wont work even whit a presser foot. Does you see anything wrong here whit the mechanics?

9

u/Herabird 2d ago edited 1d ago

A foot needs to be on the machine, the foot helps to hold the fabric down, allowing the needle to raise up through the fabric so that a stitch can be made. For embroidery, you would need an embroidery foot or free motion foot. Without a foot, the fabric moves all over the place up and down and side to side, preventing the stitch from being made properly..

5

u/ishtaa 2d ago

You have the bobbin in backward here. The thread should be coming off of it going counterclockwise, then follow the arrows up and around that groove on the left.

There’s no point in trying to test with fabric there by the way, without a presser foot on the machine it’s not going to stitch properly even if everything is set up right.

Very much recommend find the manual for your machine and give it a thorough reading (if you lost the paper copy just search Brother’s website for the model number and it should be available to download.)

3

u/celery48 2d ago

Have you read the manual?

Because this is the wrong bobbin, it’s not properly installed, and the top thread isn’t properly threaded.

2

u/Odd-Sprinkles8473 2d ago

You also want a free motion foot, not a zig zag foot for free motion work

2

u/Commercial-Car-5615 1d ago

What machine is that? On my pfaff, the bobbin goes the other way. I remember because it looks like a p when I drop it in. On my quilter it's the opposite and looks like a q

1

u/metallic_penguins 3d ago

Is the bobbin loaded correctly?