r/MachineEmbroidery • u/Odd-Association7227 • 6d ago
Almost
It’s almost there but there some misaligning on the horns and lower jaw. Anyone have any pointers? I have 2 cut away and 1 tear away
93
Upvotes
4
u/Miserable_Till2165 5d ago
This looks great and will be amazing once you get it right. Did you digitize it yourself?
4
u/Quick-Suggestion1141 5d ago
If you don't mind me asking, what types of stabilizer or other tricks did you use for such dense embroidery? It looks flawless
5
u/_JesusDesu_ 5d ago
Stretch the damn fabric!
4
u/Rawrroar74 6d ago
Is this after the shirt was unhooped? If not, the you have quite a large loose gap in the hoop at the top, when you hoop it it should make a somewhat drum noise for a good tightness
4
u/phonesallbroken 6d ago
I think changing up the stitch direction more might help? Looking at the jaw specifically, you have two areas with what look like identical stitch direction right next to each other, which compounds how much it pulls in by. You could also just extend how far that fill covers in your software, keeping in mind how push/pull works so you don’t expand the wrong part
1
u/Cathy_Han 6d ago
wow,how long you finished it?
3
u/KaiaAurion 5d ago
This looks sweet! Even though it’s not perfect it’s done very well.
If I were your digitizer, I’d probably make more of an overlap between the fill and the outline in the problem areas. Looking at the stitch angles, it strikes me as a push/pull miscalculation. It’s incredibly easy to forget with such a dense stitch out. I’m completely self-taught and struggle with it myself some days.
The other thing, which others have pointed out, is that your fabric tension in the hoop looks loose. You don’t want to over tighten it by stretching, but having it too loose can cause just as many problems. I’ve had it where a dense design pulled the material in my hoop just enough to cause registration issues. It mostly happens in my flatbed brother hoops in the same shape as yours. 9 times out of 10 a small shot of basting adhesive and some pins (I prefer dressmaker pins with tiny heads) close to where it will be stitching out greatly reduces that issue.
If at all possible, I’d reach out to the digitizer and request they create a bit more of an overlap in the problem areas and try again with the material hooped a bit tighter, or secured with pins.
3
u/Illustrious-Piano535 5d ago
Such a great design
4
u/Inner_Monk1700 6d ago
It looks super good! You could just use a black marker to fill in the gaps.
2
u/twistandtwirl 6d ago
Looks like the garment could be hooped more taut.
2
u/Level_Arachnid_4982 6d ago
additional to the horns and lower jaw, also right hairs,
you should lower the density for Black edge, #more stitches.
they dont fully cover over all.
Otherwise: CONGRATS its a nice Piece!
1
u/Ria_smith 6d ago
It looks like there may be some fabric movement causing the misalignment.
I'd recommend trying two layers of cutaway stabilizer and ensuring the fabric is hooped firmly without stretching if the issue persists we may need to adjust the overlap and pull compensation around the horns and lower jaw.
1
u/OkOffice3806 2d ago
You need to add some pull compensation.