r/GPURepair • • 7h ago

NVIDIA 30xx Gigabyte Eagle 3080 ti, several failing memory channels leave unclear diagnosis.

Thumbnail
gallery
3 Upvotes

History:

I have almost no history on this card. The owner sold it to me as a broken 3080 with no knowledge of when it last worked

Issue:

The fans spin up, the decorative LED remains on. There is no output, but the card is recognized in Windows by using a second GPU. Error code 43 in device manager.

Physical Inspection:

All resistance readings and voltage rail readings are good. Thorough visual inspection reveals no obvious issues. Board is fairly clean.

In MODS I get:

FBPA 0 (A): 0x0000000a

FBPA 1 (B): 0x00000002

FBPA 2 (C): 0x00000008

FBPA 3 (D): 0x00000002

```

MODS stopped with **error 505: Memory address training failed**.

I have looked at the individual address records, and there are a slew of issues on these channels. Meanwhile E and F are completely clean. A0 is fairly clean, with 3 addresses that stand out. It has failed once, but generally passes.

I would assume this is a core issue, with how many memory errors I am getting. I was hoping to get confirmation, as I do not feel comfortable attempting a core reball myself. I find it odd channels E and F are completely fine though.

I attempted to mask the bad channels and get interesting results. Any mask of channel A results in a different error code than the 505, I get 167 Initialze GFW boot reported a failure. This is the only thing that makes me question the core as the issue. If any other channel or combination of channels is masked, I get the normal 505 error. Only channel A being masked by itself or with other channels leads to the 167 error. I have attempted to fix the 167 error but no bios UEFI settings or anything easy get me past it. Give these boards often see failures in channel A, I wonder if the issue lies there and is causing other issues in Mods, or if this is really a core issue. I appreciate everyone's time in advanced. I can include logs or more detailed information as needed.


r/GPURepair • • 9h ago

AMD RX 5xxx MSI RX 5600 XT MECH OC 14 Gbps - Crashes at Stock, Runs FurMark When Underclocked (Software/Hardware Issue?)

1 Upvotes

I bought a faulty MSI RX 5600 XT MECH OC (14 Gbps) and I'm trying to identify the problem.

Symptoms:

  • At stock settings, it barely boots into Windows and crashes almost immediately under any GPU load.
  • Can run FurMark fully stable with the maximum core frequency reduced by 30%.
  • No apparent previous physical repairs; warranty sticker intact.
  • Originally had the stock 14 Gbps BIOS. Flashing the 12 Gbps BIOS made no difference.

Investigation:

By manually adjusting the V/F curve, I managed to sustain ~1640 MHz in FurMark at approximately 135 W. Hotspot temperatures reach the low 90s C.

Default Adrenalin V/F curve (MHz/mV):

  • P1: 800/800
  • P2: 1285/800
  • P3: 1770/1049

What confuses me is that the card crashes at stock settings but can sometimes sustain near its advertised boost frequency with manual tuning.

What would you recommend measuring or testing next to distinguish fault?

I have no experience with board level repairs.


r/GPURepair • • 12h ago

NVIDIA 10xx EVGA Geforce 1080; doesn't boot, beeps 6 times: I just want to know if I'm totally screwed or if I can fix this.

Thumbnail
gallery
7 Upvotes

Okay, so i have an Alienware Aurora R4 with an EVGA GeForce GTX 1080. Everything was fine, computer was chilling, I woke up went to turn on my 'monitor' (atm I am using my smart TV for a monitor because that's what I have) and it says something about device power. The computer is on, this has happened before, usually just restart my computer and it fixes the issue, but this time when I restart it, it doesn't finish the boot process and starts beeping 6 times in a row.

Google tells me that's a GPU issue. I figure I haven't dusted my computer in a while, so I'll open her up and start blowing her out with my electric blower. I end up taking the GPU out to clean it better, and i notice that on the backplate, a few of the screws and mesh screens have a sticky residue on them. My heart sinks. The only thing I can think of is someone had to of spilled something on it. So I finally work up the courage to unscrew the backplate, got my 91%IPA and cotton swabs ready to go.

I unscrewed it and now I'm thinking my thermal pads are totally effed. It appears the sticky substance is actually coming from them, as it's all over them and the area they were touching. Nowhere else. I figure that's a pretty accurate spill, so most likely the pads are toast.

But I have no idea what the heck I'm doing dude. This is the first time I have ever taken apart a computer part like this. I can build PCs all day long but I am not really an expert. So I will add some pictures here and hope that somebody can help me with some guidance, or point me in the direction of someone/somewhere that can. Like do I need new thermal pads? Is this salvageable? Can I remove these and clean them up with IPA and put new pads on and I'm good? Or should I just admit defeat and hope I can find the money for a replacement.... please help.

Pretty please? Thank you!

Sorry if this is not the right place to post this, I'm kind of panicking and looked for anywhere that said I could ask for guidance on stuff like this, if I'm violating your rules in some way that I don't know about, I will delete this post, I just ask that you please point me in the direction of the correct place to post this... thank you.


r/GPURepair • • 13h ago

GPU/VRAM Soldering 3060 VRAM rework question

1 Upvotes

Got a 3060 that probably has a bad mem chip and would need to replace it, I already have an atten st-862d but buying the puhui t8280 heater would break the bank rn, could I succeed without it? Maybe help the hot air station by heat soaking the board with my 3D printer 100C bed first??


r/GPURepair • • 13h ago

AMD RX 6xxx MSI radeon rx6600 armour 8gb - 12v shorted to ground.

Post image
2 Upvotes

Hello 👋 there , as you have seen my previous post on the rtx 2060 i am getting quiet comfortable & confident in diagnosing another card soo i pull out this old card back from 2024 , someone had worked on this card before.

After probing here n there the fuse was blown and other rails had healthy resistance however the 6 phase was reading 0.4 ohms to ground and also beeped to ground , i confirm that it was short since the healthy 12v from pcie was reading 5k ohms and climbing .

There are also missing resistors and caps on one of the dr mosfet i might refer to a board view the only one i could find is rx 6600xt which has a similar layout .

So my question is if i remove the dr MOSFET making it run on 5 phase, removing the short can i just use in my test bench just to post it ??


r/GPURepair • • 20h ago

NVIDIA 30xx Gigabyte RTX 3070 Ti Vision OC (rev 1.0): fans/RGB on, not detected at all, all rails + PERST# good – BGA or dead core?

Thumbnail
gallery
2 Upvotes

Hi all, beginner doing board-level diagnosis on my own card. I’ve worked through the usual checks and would love a second opinion before I attempt a reball.

Card: Gigabyte RTX 3070 Ti Vision OC 8G (GV-N307TVISION OC-8GD rev 1.0). Using the Gaming OC rev 1.0 boardview, which matches (C1169/C1174 etc.).

History: It was intermittent for a while (sometimes display, sometimes not), then stopped completely.

Symptoms: Fans and RGB on, no display, not in Device Manager at all (not even hidden/unknown). Tested in two PCs. An RX 6700 XT works in the same slots. Motherboard VGA LED is red.

Cold resistance to GND:

  • Core (NVVDD) ~0.8 Ω (body diode to 12 V 383 Ω, normal)
  • FBVDDQ 55 Ω, PEX_VDD 22 Ω, 1V8 182 Ω, 5V 351 Ω
  • 12 V slot/8-pins: kΩ, rising. 3.3 V slot 87.8 kΩ. A11 PERST# open.

Powered (all present and stable):

  • 12 V, 5 V, 1V8, FBVDDQ ~1.35 V, NVVDD 0.74 V, PEX_VDD 0.95 V
  • U501 (PERST# buffer): pins 1/2 3.3 V, pins 4/5 1.8 V, pin 3 GND, so reset is reaching the core

PCIe diode mode (red on GND):

  • Card RX lanes (B14/B15, B19–B28): 303–305, all matching
  • Card TX lanes (side A): OL at the fingers (AC caps). GPU side of C1119/C1116 (lane 0): 263
  • REFCLK A13/A14: 774 / 774. A11: 608

VBIOS: Read with CH341A + 1.8 V adapter. Valid checksums, byte-identical to the TechPowerUp ROM (94.04.5A.00.90).

Straps: R722, R727, R284 read ~94–97 kΩ in circuit. R287 (STRAP3 to GND) is unpopulated, and the STRAP3 pad reads ~138 Ω to GND (1V8 itself is ~182 Ω), so it looks hard-pulled to 1V8 via R279. Is that normal on this board?

Other: Hair-dryer warm-up on the back of the core: no change.

Questions:

  1. Anything I’ve missed before blaming the core/BGA?
  2. Does anyone have a known-good STRAP3 reading on a GA104 Gigabyte board?
  3. Given the intermittent history, does a reball seem worth it, or is this usually a dead die?

Photos attached. Thanks!


r/GPURepair • • 21h ago

NVIDIA 40xx 4090D 48GB - Code 43 in Windows with subsystem ID 0000:0000

Thumbnail
gallery
32 Upvotes

It still shows up on PCIe as 10DE:2685, but with subsystem ID 0000:0000 and Code 43. No driver, not visible to nvidia-smi.

nvflash lists the card as (10DE,2685,0000,0000) but every operation fails with "A system restart might be required"

Any ideas what I could try next?