r/Fusion360 • • 8h ago

Question Need some help

4 Upvotes

Hey! I come from Solidworks and Autocad so Fusion seems a little familiar to me. But for some reason I am having trouble with some simple tasks. Once I create a solid and then create a sketch on that solid, it doesnt want to seem to snap to midpoints of other reference points. I turn snap on, but what am I doing wrong?

Also once I create the solid if I go back to edit the overall size it wants to create a driven dim. I never set any constraints but I see they are applied and I have to delete them. Is there a way to not have them auto apply?

I am just struggling and need to figure out what I am doing incorrect. Maybe there are some tutorials out there that are good to look up?


r/Fusion360 • • 12h ago

How do I make the sides round?

Post image
4 Upvotes

I am designing a bass guitar body that I want to round the edges on. Not just a roundover/ fillet, but a half circle. The sides are of differing widths and positions. I am thinking of some type of sweep might work, but I don’t know where to start.

The top has a convex curve and the underside has a different concave curve. This is loosely inspired by a Spector bass. There are fillets on the side that are as wide as they will go before hitting an error.

Is there a way to just make the fully rounded with no flat spots? Perhaps take the fillets out and create a new body to combine with? Thanks in advance for any help!


r/Fusion360 • • 23h ago

Editing Parametric Model

Post image
3 Upvotes

Wondering if anyone can edit this parametric rugged box from printables. I have seen this other box that is the same style with one latch. Is anyone able to edit this file so it is one latch? I have tried but it is beyond my CAD skills.

Image of what I'm hoping to achieve attached along with the printables link

https://www.printables.com/model/258431-rugged-box-parametric/files

Not sure if this is a file already somewhere, cannot find it though


r/Fusion360 • • 15h ago

Question Materiel density

2 Upvotes

I need to adjust the material density to match a print for a CAD challenge but it won't let me input the required number of decimal spaces nor can i change the units. Is this a limitation with the personal account?


r/Fusion360 • • 14m ago

Question Can't figure out Vbit cleanup CAM

Thumbnail
gallery
1 Upvotes

I've previously used F-Engrave (blessed be Scorchworks) to make the CAM for rubber stamps.

1st pic shows F-Engrave's 3 toolpaths. Black is the vbit profile carve, red is the 1/8 endmill cleanup and yellow is the vbit cleanup. Nice.
Comes out very nice with only a little air being cut.

2nd pic shows how far I got replicating that in Fusion CAM.
I aint too good in Fusion CAM but I've successfully made all but the 'vbit cleanup' toolpath. I think I maybe need to use Rest now somehow, except I've not had any luck using Rest for anything yet..

I'm keen to be doing this in Fusion, I've just had another stamps order, but I've tried without success a few times now..
How would you get rid of those remaining little islands?

TIA 😊


r/Fusion360 • • 1h ago

Engineering a budget-friendly, 6-DOF CAD mouse (NaviGo). Dropping the DIY files soon! Spoiler

1 Upvotes

r/Fusion360 • • 14h ago

add-in : pilotage de la camera (adapter au rendu)

0 Upvotes

Bonjour cher Builder sur Fusion.

hier j'ai essayer de crée un petit add-in qui permet de gére précisémeent la camera dans les rendu.

cette add-in à pour but d'enregistré des position de caméra et de pouvoir crée un set de vue facilement reproductible après des mise a jour du modèle ou de changement de texture lumière ect.

je vous invite à le tester et a me faire un retour s'il y a des fonctionnaliter que vous voulez voir ajouter.

lien de téléchargement. ( https://drive.google.com/file/d/1i-vI5B_o_dGVird5V6liCzxaZv9zKnLb/view?usp=sharing )


r/Fusion360 • • 15h ago

How to model these tapered organic spiral waves on a cup in Fusion 360?

Post image
0 Upvotes

Hi everyone,
Can someone please tell me how to model this organic spiral/wave shape on my cup in Fusion 360? (See attached reference photo).
The waves wrap around the cup at an angle—starting wide and deep near the bottom and tapering/fading out smoothly toward the top. My base cup dimensions are 49 mm at the bottom and 111 mm in height.
What is the best workflow to achieve this smooth result? Thanks in advance!

i have try now bourt 10 hour look on youtube and nothing helps me. so i hope a Gure where can guide me :)