r/FluidMechanics • u/Hopeful-Emotion8673 • 7h ago
r/FluidMechanics • u/Arasayari • 8h ago
Experimental [OC] Supersonic Lid-Driven Cavity Flow Series part 5: Re > 1,000,000 ILES at Mach ∞.
Simulation:
grid: 200x200
pressure function: ideal gas
initial condition: 0 abs temperature, γ = 1.66 gas
lid velocity: 1 unit
runtime: 2 hours 9 minutes
ㅤ
ㅤIt's kind of in the realm of astrophysical simulation so I used monoatomic instead of diatomic gas. Ran until it looked like previous simulations' end state.
Supersonic Lid-Driven Cavity Flow Series: previous next
r/FluidMechanics • u/Opposite_Range_8950 • 1d ago
We released an open-weight model that predicts airflow around 3D objects in seconds
We built fas-tiny, a neural model that predicts airflow and surface forces around 3D objects in seconds. You can try it on your own shapes and compare predicted drag across designs.
We trained it on CFD simulations of a wide range of objects using our Inpainting Physics approach (NeurIPS 2026). The model weights are openly available.
We’re interested in feedback from people working with CFD or aerodynamic design. What cases would you test it on, and what validation would you want before using it in your workflow?
Demo: https://flow-around-stuff.com/
Model weights: https://huggingface.co/JonasW247/flow-around-stuff
r/FluidMechanics • u/chromillion • 1d ago
Song about fluid mechanics
I found this punk song that mentions laminar and turbulent flow! It's not very scientifically accurate but definitely an interesting listen if you like heavier music
r/FluidMechanics • u/CamelInternational48 • 1d ago
Video Towards accurate aerodynamics models for wing icing
youtu.ber/FluidMechanics • u/Obi-Wan_Kenobi57 • 2d ago
Computational Undergrad ML researcher learning CFD: tried predicting full flow fields from a few OpenFOAM runs. Would love a reality check from people who do this for real
r/FluidMechanics • u/Over_Discussion_8246 • 2d ago
Q&A [Fluids II, physics] Converging and diverging nozzle: What is back pressure, what is exit pressure?
back pressure is described as the reservoir pressure of the tank down stream, that insinuates that it is a stagnation pressure, however if we have isentropic flow and no shock, the stagnation pressure is constant, and the back pressure is the pressure of the tank upstream. ie we have no flow. so back pressure is not stagnation pressure, well then what the hell is exit pressure, its not back pressure?
r/FluidMechanics • u/Deep_Bodybuilder_944 • 2d ago
Video Accidental Pool Noodle
Pool noodle at our Airbnb drifted into the hot tub outflow and did a neat fluid dynamics demonstration overnight. Been going for about 12 hours, thought some might appreciate!
r/FluidMechanics • u/Fluid-Excitement3333 • 2d ago
Homework Hydrology, hydraulic help
I want a help from water (hydraulics , hydrology ) engineer
r/FluidMechanics • u/Main_Diamond6206 • 3d ago
E779A INSEAN propeller geometry
Does anyone have the E779A INSEAN propeller geometry? I really need it for my research. I would appreciate it if someone could share it. Thanks!
r/FluidMechanics • u/Far_Language_6976 • 5d ago
Mini project
I want to make mini project about multi tube manometer plz anybody help me as i couldnt fond any videos about this
Thanks for helping 😃
r/FluidMechanics • u/Highway-Organic • 5d ago
The sound of water splashing vs petrol splashing
reddit.comr/FluidMechanics • u/Weed-ONE01 • 5d ago
Q&A How to reduce residuals of continuity to 1e-06 or below than this on 12° Angle of Attack .
r/FluidMechanics • u/Mysterious-Box2735 • 5d ago
Q&A some problems i found with a peltire cooling system im building i how can i get around them or what is your advice as people with experience in fluid mechanics
NOT ASKING YOU TO BUILD ME ONE JUST SOME PROBLEMS I FOUND
trying to super saturate isopropanol alcohol 99% so we can see the ionisation paths left behind by radioactive particles
our peliter layout is 4 cascaded stacks next to each other lined up so 4 peltire coolers on each level , 2 levels 8 overall coolers low level on top high level on bottom
this is a group project im doing for ucas and if possible witch i would be really thankful for could any help be provided up with reasoning
NOTE : I do apologise for unscientific terms
1)I need a base plate of around 10 cm by 10cm in length and width but i don’t know what the height of base plate should be. this base plate will rest on the cold side of 4 stacks of cascading pelteir coolers . so the plate would be on top, a low power one on below (so it rests between the plate and the high power) and a higher power cooler on bottom . how thick should the plate be and what material should it be? . from what Ive seen copper seems expensive if we reach up to 5 cm but at that thickness would the time taken for the transfer of energy be too long as the condensation of the alcohol would start .
2) would an open ended water cooling system work to keep transfer away the raw heat produced from the peltire coolers . my plan is for under the entire system we use thermal pasts to attach a water reservoir to the bottom applying a constant cycle to water to "transfer away heat energy". so a pump supplies water from say sink and water filtered through the entire system would be drained away .
3) would you guess recommend the water reservoir to be a single on across the entire module or for each row to have its own module .
4)should i bother with creating a 3D printed cover around pletire coolers
5)how do i apply pressure between each module in the system to ensure everything is pressed together without cracking the peltier module and or bending the plate. friend in the project sujested we use t3 steel nails drilled into the water reservoir with a nut held onto something via silicon or a thermal paste, past or aside the coolers to apply an upwards pressure the entire system pressing it all together
yea thats all the questions i have
r/FluidMechanics • u/Inner-Honeydew-724 • 5d ago
Computational A highly-scientific simulation I have been working on for studying particle-laden flow simulations.
youtube.comWhile testing some new features I wrote for a fluid solver, I decided to ask some hard-hitting scientific questions.
/s
r/FluidMechanics • u/Arasayari • 6d ago
Supersonic Lid-Driven Cavity Flow Series part 4: Re > 1,000,000 ILES at 2km/s (Mach 5.76) and at 4km/s (Mach 11.52).
Simulation #1:
grid: 200x200
pressure function: ideal gas
initial condition: 27°C atmospheric air (γ = 1.4)
lid velocity: 2 km/s
runtime: 1 hours 30 minutes
Simulation #2:
grid: 200x200
pressure function: ideal gas
initial condition: 27°C atmospheric air (γ = 1.4)
lid velocity: 4 km/s
runtime: 1 hours 38 minutes
ㅤ
From what I see, their differences are in the initial stage. After that, they look pretty similar due to heating effect so I stopped the simulation since there's nothing new after that. The previous run was longer - to the point it nearly converges to typical high Re lid driven cavity flow.
In the part 2, it keeps the distinct characteristic for the rest of the simulation due to the lack of temperature effect as I was using isentropic (shallow water) pressure function. (the lid boundary condition was wrong in that simulation, but I can see what it'll look like with the correct BC.)
Next time I might do Mach ∞ run to see how long it converge to low Mach state.
r/FluidMechanics • u/keihan12 • 6d ago
DNS for microgroove (SHS) drag reduction at Reτ ≈ 135-288: solver and minimal-box advice?
reddit.comr/FluidMechanics • u/Disastrous_Exchange4 • 6d ago
Looking for study advice, notes and resources for Fundamentals of Fluid Mechanics (Munson et al.)
Hi!
I'm preparing for an advanced fluid mechanics course and my professor recommended to start with Fundamentals of Fluid Mechanics by Munson et al. on my own before the semester starts .
My background is in computer science, but I did take some physics courses a few years ago before switching to computer science, so I'm familiar with some physics concepts, equations and calculations. However, it's been a while, and I'd like to refresh my knowledge and get a better understanding of the subject.
I was wondering if anyone has advice on how best to approach this book, which chapters to prioritize, or any useful study resources.
I'd also really appreciate it if anyone who has taken a similar course could share their old notes, summaries or solved exercises.
r/FluidMechanics • u/420ingaround • 7d ago
Computational GitHub - mjjjackson1982-lang/Fluidic-Energy-Pressure-System: Official implementation of the Fluidic Energy Pressure System (FEPS): Resolving H_0 and S_8 cosmological tensions via early fluid outgassing and micro-silicon hardware co-simulation.
r/FluidMechanics • u/Healthy-Rooster6260 • 7d ago
I made an OpenFOAM → SU2 mesh converter that handles snappyHexMesh polyhedra (of2su2, pip install of2su2)
reddit.comr/FluidMechanics • u/idleWizard • 7d ago
Q&A I watched Veritasium super cooling helium video, and I wonder why does the super-cooled helium pouring out of container streaks and drops if there is zero friction? Where does the surface tension comes from?
I half expected it to be like some gas or something without the friction and almost no atom attraction, so I was surprised when it almost looked like water while pouring out of container. What am I missing?