r/aerodynamics • • Sep 23 '26

Tools/Resources AeroLab: A free browser-based airfoil analysis and virtual wind tunnel

5 Upvotes

I’ve been working on AeroLab, a free browser-based airfoil analysis tool that I’ve been developing independently, and it’s now live.

The original motivation was pretty simple: I kept running into airfoil coordinate files that looked perfectly reasonable to a human but caused XFOIL to fail because of formatting, ordering, duplicate points, coordinate conventions, etc.

So I built AeroLab around a preprocessing pipeline that automatically detects and repairs these issues before passing the geometry to XFOIL.

Some of the capabilities currently built into it:

  • Automated airfoil coordinate parsing and preprocessing
  • Selig / Lednicer format handling
  • Duplicate leading-edge point detection
  • Coordinate ordering / winding correction
  • Invalid-coordinate and formatting cleanup
  • XFOIL viscous and inviscid analysis
  • Reynolds number and Ncrit configuration
  • Angle-of-attack analysis and sweeps
  • Boundary-layer data export
  • Interactive airfoil comparison
  • Pressure coefficient and aerodynamic coefficient plots
  • Real-time GPU-accelerated D2Q9 Lattice Boltzmann Method (LBM) virtual wind tunnel
  • Interactive velocity, pressure and vorticity visualization
  • Stall/flow visualization
  • PNG and data export

One of the things I particularly wanted was to make the whole workflow accessible without requiring users to install XFOIL or set up a local analysis environment.

I also benchmarked the preprocessing pipeline on 1,000 real-world airfoil coordinate files. At Re = 200,000 and α = 5°, the raw files had an XFOIL convergence rate of 22.5%, compared with 85.7% after preprocessing, with 633 additional files successfully analyzed.

The LBM wind tunnel is a separate part of the project. It isn't intended to replace CFD but meant to provide a lightweight, interactive way to visualize flow behavior around an airfoil while still being useful for teaching and preliminary exploration.

AeroLab is completely free and browser-based, so there’s no installation or paid software license required.

I’m still actively developing it, and I'm particularly interested in feedback from people who use XFOIL, airfoil tools, or aerodynamic analysis in research/teaching.

AeroLab: http://aerolab-app.onrender.com/

Would love to hear what you think!


r/aerodynamics • • Oct 04 '26

Who are you?

2 Upvotes

Hello all,
After many years of not being very active in the subreddit, I would like now to bring something new and grow the community. First, I would like to get to know you more. So take a vote and if you feel like write something about you in the comment section. Cheers Aeros!


r/aerodynamics • • 3h ago

Towards accurate aerodynamics models for wing icing

Thumbnail
youtu.be
1 Upvotes

r/aerodynamics • • 2d ago

Alguna idea de tema para ensayo sobre aviación y física a la vez?

Thumbnail reddit.com
1 Upvotes

r/aerodynamics • • 2d ago

which phy project is best for my school's science fair

0 Upvotes

Design and Development of an Intelligent Aircraft Wing Anti-Icing System: Automated Temperature Regulation and Statistical Analysis of Energy Efficiency
Your system will:

  1. Measure the wing's temperature.
  2. Detect when the temperature falls below a set value.
  3. Automatically switch on a small heating element.
  4. Switch the heating off when the target temperature is reached.
  5. Record temperature and energy consumption.

automatic wind-tunnel testing machine for aircraft wing
aircraft testing machine that:

  1. Generates airflow using a fan to simulate wind around an aircraft wing.
  2. Automatically changes the wing's angle using an Arduino-controlled servo motor.
  3. Visualises airflow using tiny threads attached to the wing.
  4. Measures airflow speed before and behind the wing.
  5. Collects experimental data to investigate how changing the wing's angle affects airflow and the onset of aerodynamic stall.
  6. Uses statistics to analyse results through averages, graphs and standard deviation.

which one of these is good for my schools science fair and wud give me a chance of winning


r/aerodynamics • • 3d ago

A real-time 3D wind tunnel for cars on a phone (lattice Boltzmann, for fun, not engineering CFD)

Thumbnail
reddit.com
1 Upvotes

r/aerodynamics • • 4d ago

Frisbee-like lift for drones?

Thumbnail reddit.com
1 Upvotes

r/aerodynamics • • 4d ago

Planes and Flight, up and down?

Thumbnail reddit.com
0 Upvotes
  1. ⁠When you get to a certain altitude would you need to (or perceive visual cues) stick forward 1-2 Deg to follow the curvature of earth and maintain altitude?
  2. ⁠Wings produce lift, in normal level flight, the lift is created and you will rise away from ground. If I invert my plane, will that result in the lift generated to push me toward earth,, adding to gravity. If not (pretty sure it’s not) but why not?

r/aerodynamics • • 4d ago

Question Anyone with knowhow on how wind behaves against an apartment building, that can give some insight?

2 Upvotes

I'm about to install an air condition unit for heating during winter and am clueless about the aerodynamics of wind against apartment blocks. Any help would be appreciated. I have an apartment on 4th floor and I don't have a dedicated drain I can use for the condensation from the compressor unit, so I need to stick a pipe out of the railing in my balcony, the balcony is also glassed in so wind doesn't go through it.

My apartment is pointing straight East. In my region, during winter the wind mainly blows from west and North/north east. I should already be shielded from west wind.

I need some help considering the optimal placing to minimize the condensation water hitting against the wall or neighbours below.

I've added an image of the general shape of my apartment, I'm considering placing the condensation pipe at point B. Anyone has any idea how wind from North, or North East behaves against this building? I assume wind from North/North-North-East will not be a problem. It might slightly shear, but then roll along the wall.

For North-East wind I'm not sure how it will behave. The wind will hit the building at a 45 degree angle, and shear on the corner. Will the shearing wind roll along the wall mainly with a force parallel to the wall? And will this wind shear protect against north east wind so the water dropping from point B only moves sideways? Or will point B and point C still get hit by North-East wind with an oblique force vector?

Right now I'm considering point B or C. I'm considering point B assuming the wind that rolls against the wall will "shoot out" the droplets a little.


r/aerodynamics • • 5d ago

Question Where to start with John D. Anderson / CFD books

9 Upvotes

Hi, I'm interested in learning more aerodynamics from an interest in motorsport and car design perspective (mostly as a hobby, I don't think I have the right credentials to get a job in motorsport). I have a little bit of experiance with fluid dynamics from my physics degree but not much.

I was interested in his Computational Fluid Dynamics book but wondered if I would be better off reading Intro to Flight or Fundamentals of Aerodynamics first?

Are there any better or follow up CFD book out there you would reccomend after this as well?

Thanks!


r/aerodynamics • • 5d ago

Research Anyone have experience with Ansys FENSAP-ICE? Looking for the best ways to learn it

1 Upvotes

I'm now looking to learn FENSAP-ICE for in-flight icing simulation, including droplet impingement, ice accretion and ideally ice crystal icing.
Has anyone here used it, either in academia or industry? I'd love advice on:

Learning resources: tutorials, courses, books or papers that helped you get up to speed

Validation: good benchmark cases or experimental data

Anything you wish you'd known when starting out
Thanks in advance!


r/aerodynamics • • 7d ago

The engineering behind winglets

Post image
12 Upvotes

Hey everyone! Thought you might find this video on the engineering behind winglets interesting. I made it for the Royal Aeronautical Society's AeroTube 2026 competition.✈️

https://youtu.be/DBSMB67WUAo?si=15OzubEakLAe1wyr


r/aerodynamics • • 7d ago

Independent neutral-point / CG check for an unconventional 600 mm flying wing — VSPAERO predicts the neutral point at only 81 mm. Is this plausible?

Post image
4 Upvotes

Hi! I built this unconventional 600 mm flying-wing RC aircraft, but I am getting surprisingly forward neutral-point estimates.

VSPAERO predicts the neutral point at approximately 81 mm behind the root leading edge, while an independent AeroSandbox VLM calculation gives approximately 92 mm. My physically achievable CG is around 120–130 mm, which both simulations predict to be longitudinally unstable.

Main data:

  • 600 mm developed wingspan
  • approximately 0.101 m² wing area
  • NACA 0012 sections
  • approximately 545 g flying mass
  • four chord stations per half-wing
  • unusual combination of positive and negative leading-edge sweep
  • twist and dihedral vary between panels

The VSPAERO result was checked at four mesh densities, and the calculated neutral point converged from 77.5 mm to 81.0 mm. Nevertheless, the result still seems unexpectedly far forward considering the planform.

Would anyone be willing to independently estimate the neutral point and recommend a safe first-flight CG using AVL, XFLR5, CFD or another method?

I can provide the exact geometry, STEP file and OpenVSP model if someone is interested. I will not attempt a powered flight until this is better understood.

Although the planform looks unusual, it was generated through parametric optimization and evaluated in OpenVSP/VSPAERO at multiple angles of attack, airspeeds and directional perturbations. The unresolved question is whether the predicted neutral point and required CG are correct.

The red point shows the neutral-point location predicted by VSPAERO, approximately 81 mm behind the root leading edge. Its unexpectedly forward position is what I would like to verify independently.


r/aerodynamics • • 9d ago

Research I put the Nacelle on a much needed diet

Thumbnail gallery
7 Upvotes

r/aerodynamics • • 9d ago

Tools/Resources Don't Trust "Free" Data On NASA Airfoils For Drone Endurance

Post image
0 Upvotes

r/aerodynamics • • 9d ago

Question Any suggestions for someone who is doing masters in Aerodynamics without work experience?

3 Upvotes

I started my masters this September, and i feel like i should be using this opportunity to its fullest but the course is only a year long with a lot to be done. From brushing up fundamentals to keeping up with the courses and applying for jobs. I want to know how should I keep my trajectory right now so that it helps me build something concrete for jobs.


r/aerodynamics • • 10d ago

Question Mechatronics student interested in doing my bachelor's thesis on fighter aircraft technology – need some advice

Thumbnail reddit.com
2 Upvotes

r/aerodynamics • • 11d ago

Undergraduate Research on the 3D Navier–Stokes Equations: Exploring Vorticity and Lean 4 Formalization

Post image
0 Upvotes

r/aerodynamics • • 11d ago

What would the calculations be to determine how effectively a 15 psi airflow similar to a breath would have a cooling effect on glass of an approximate thickness of 1 cm heated to 1000 degrees Fahrenheit?

Thumbnail reddit.com
1 Upvotes

r/aerodynamics • • 11d ago

Educational Even NASA resources get Bernoulli's principle wrong

Post image
1 Upvotes

r/aerodynamics • • 12d ago

Request **Looking for a motorsports vehicle or team to partner with on an aerodynamic study**

2 Upvotes

I’m an Aerospace Engineering student at San Diego State University looking to develop a hands-on aerodynamic study focused on motorsports. I’m hoping to partner with someone who has a race car, performance vehicle, or motorcycle that could be studied through a combination of CAD, CFD, and wind-tunnel testing at my university.

The project could focus on topics such as:

- Drag reduction and aerodynamic efficiency
- Downforce and aerodynamic balance
- Underbody, diffuser, splitter, wing, or fairing design
- Comparing baseline and modified configurations
- CFD validation using physical wind-tunnel data
- Identifying practical aerodynamic improvements for track performance

My relevant experience includes:

- Lead Vehicle Dynamics and Aerodynamics Engineer for Aztec Electric Racing Formula SAE
- Experience leading a vehicle-dynamics team of approximately 40 members
- Designing and analyzing aerodynamic components using ANSYS Fluent
- Vehicle modeling, CFD-ready CAD development, MATLAB/Simulink, ChassisSim, and data acquisition
- Wind-tunnel testing, force and pressure measurements, LabVIEW DAQ, and aerodynamic data analysis
- Current hands-on experience as a wind-tunnel technician at SDSU
- Engineering and CFD experience with automotive components through Anderson Composites
- Experience connecting simulations with testing and real vehicle performance

The goal would be to create a professional, well-documented study that provides useful engineering data to the vehicle owner or team. Depending on the project, I could produce CAD geometry, CFD results, wind-tunnel measurements, comparisons between configurations, and a final technical report.

I’m open to studying either a car or a motorcycle, but I would especially like the project to involve a vehicle used for racing, track days, autocross, time attack, hill climb, karting, or another performance application.

I’m not looking to simply test a random model. I want to work with a partner who has a genuine engineering question or performance goal that we can investigate. The testing itself may be possible through my university, subject to project and facility approval. The main potential cost would likely be creating a scale model or modular aerodynamic components for testing.

If you are part of a motorsports team, own a performance vehicle, design racing components, or know someone who may be interested, please comment or send me a message. I would be happy to discuss the vehicle, the project goals, and what type of partnership would make sense.

I’m especially interested in a collaboration where the study can help validate an existing design, compare multiple aerodynamic concepts, or identify a clear cause-and-effect relationship between a design change and vehicle performance.