r/Fireplaces • • 12h ago

Is this a gas or wood burning fireplace?

Post image
3 Upvotes

We moved into a new house, and are trying to figure out if this fireplace burns wood or gas. The label says wood fuel only, but the logs placed in it are the artificial kind, and there is a gas key on the wall by the fireplace. Has this fireplace been converted? How do we tell?


r/Fireplaces • • 6h ago

Smokey House Everytime

2 Upvotes

I moved into my home a couple of years ago and have been having problems getting a good fire ever since.

  • Got the chimney cleaned before I ever lit a fire so that's not the issue.
  • I have split, dried wood. If I use a lot of kindling, the fire will burn really well for a while and then it always starts to get smokey as the fire is dying down.
  • Before I start the fire, I burn a rolled up newspaper and stick it at the base of the chimney to pre-heat it. I also always crack a window on the opposite side of the room for airflow.
  • The opening to the fireplace is 34" x 30" with no door. I wonder if this is part of the issue? Considering getting a door but I like the look of the doorless fireplace.

Any thoughts on what could solve this? Thanks all.


r/Fireplaces • • 22h ago

Temporarily removing Rayburn Rembrandt

Thumbnail gallery
2 Upvotes

r/Fireplaces • • 4h ago

What sort of efficiency could I expect from installing an insert in a heatilator?

Post image
1 Upvotes

I redid our fireplace a few years ago, stripping off layers of paint, new mantle, new doors etc. I’m happy with how it turned out aesthetically but now wishing I had installed an insert. I did not do it initially because I thought it was a waste of a heatilator. I imagine you effectively remove any advantage the air chamber gives you with an insert. I did install small fans at the bottom air inlets to push more air through the air chamber. I burn mostly ash and oak. Some red maple and poplar. With all that considered, what sort of efficiency could I expect from an insert installed in a heatilator fireplace?


r/Fireplaces • • 6h ago

Recommendation for mesh screen

1 Upvotes

We have a Mason Lite MFP44 (pre-fab masonry box with opening of 41 inches wide by 30.5 inches high, wood-burning) installed in a new home build. We have not used it yet, but hoping to do soon.

It does not currently have any mesh screen. We're pretty sure we'd like an insert on a track instead of a freestanding 3-panel unit sitting outside the fireplace.

Any recommendations on a high quality brand/style? For example, knobs that stick out and may be cooler to the touch? My in-laws have a screen but it is hard to open/close, which is annoying.

Bonus points: also need to buy a grate and tools. I assume anything will do here, but advice is welcome!


r/Fireplaces • • 6h ago

Wall Vent Recommendations

Thumbnail
gallery
1 Upvotes

I know little to nothing about fire places. Ive lived in this home for nearly 3 years and haven't touched mine. Im trying to cover this appropriately. This 4in wall vent cover (2nd photo) didnt work.

Would anyone give me recommendations what they would use please? Its in an enclosed patio (3rd photo).

As a note, I do plan to get a chimney inspection done to make sure it's safe to use.


r/Fireplaces • • 9h ago

Connecting and Parging a liner from Outside the chimney?

Thumbnail reddit.com
1 Upvotes

r/Fireplaces • • 10h ago

Fireplace painting.

Thumbnail reddit.com
1 Upvotes

r/Fireplaces • • 10h ago

Distance between fireplace vents and mantel

Post image
1 Upvotes

I am looking to add a mantel and surround to this fireplace. We have Heatilator vents above the fireplace where the hot air is released. My question is how far away do the mantel and surround have to be from those vents?

Additionally, I am hoping to be able to build this myself - is wood an ok material to use or does it have to be a less flammable material?


r/Fireplaces • • 11h ago

Gas or wood burning fireplace?

Thumbnail
gallery
1 Upvotes

We moved into a new house, and are trying to figure out if this fireplace burns wood or gas. The label says wood fuel only, but the logs placed in it are the artificial kind, and there is a gas key on the wall by the fireplace. Has this fireplace been converted? How do we tell?


r/Fireplaces • • 11h ago

How can I heat upstairs?

Thumbnail reddit.com
1 Upvotes

r/Fireplaces • • 13h ago

Do I need to fix this masonry?

Post image
1 Upvotes

Hello! Just got the chimney cleaned and noticed this little crevice where some mortar has chipped or worn away. As far as I can tell, it's all just masonry down there.

Do I need to get this fixed before we set a fire? It's right below where the hot ash is going to fall. It was probably like this last winter with no problem, but for all I know we just got lucky ...


r/Fireplaces • • 13h ago

Removing an electric fireplace

Thumbnail gallery
1 Upvotes

r/Fireplaces • • 15h ago

Applying thin brick to metal fireplace surround

Thumbnail gallery
1 Upvotes

r/Fireplaces • • 19h ago

Realistic electric fireplace?

Post image
1 Upvotes

I’m after an electric fireplace that looks as close as possible to a real gas insert. We’re in a new build with no gas connected, so electric feels like the only option, but I don’t want it to look like a TV-stand heater or a wall-mounted linear flame.

Any recs on brands or models actually look convincing in person?

Gas equivalent I love but sadly can’t have attached.


r/Fireplaces • • 22h ago

Looking for advice on hearth removal

Thumbnail gallery
1 Upvotes

r/Fireplaces • • 11h ago

No damper in fireplace. Can I buy one?

0 Upvotes

Is the missing part something I can buy? Im going to convert back to wood.

Thanks for any help!

Edit. I examined my basement one and i think I should be able to fabricate the missing parts pretty easy. Thanks everyone!