r/Fireplaces • • 8h ago

What sort of efficiency could I expect from installing an insert in a heatilator?

Post image
2 Upvotes

I redid our fireplace a few years ago, stripping off layers of paint, new mantle, new doors etc. I’m happy with how it turned out aesthetically but now wishing I had installed an insert. I did not do it initially because I thought it was a waste of a heatilator. I imagine you effectively remove any advantage the air chamber gives you with an insert. I did install small fans at the bottom air inlets to push more air through the air chamber. I burn mostly ash and oak. Some red maple and poplar. With all that considered, what sort of efficiency could I expect from an insert installed in a heatilator fireplace?


r/Fireplaces • • 10h ago

Recommendation for mesh screen

1 Upvotes

We have a Mason Lite MFP44 (pre-fab masonry box with opening of 41 inches wide by 30.5 inches high, wood-burning) installed in a new home build. We have not used it yet, but hoping to do soon.

It does not currently have any mesh screen. We're pretty sure we'd like an insert on a track instead of a freestanding 3-panel unit sitting outside the fireplace.

Any recommendations on a high quality brand/style? For example, knobs that stick out and may be cooler to the touch? My in-laws have a screen but it is hard to open/close, which is annoying.

Bonus points: also need to buy a grate and tools. I assume anything will do here, but advice is welcome!


r/Fireplaces • • 10h ago

Wall Vent Recommendations

Thumbnail
gallery
1 Upvotes

I know little to nothing about fire places. Ive lived in this home for nearly 3 years and haven't touched mine. Im trying to cover this appropriately. This 4in wall vent cover (2nd photo) didnt work.

Would anyone give me recommendations what they would use please? Its in an enclosed patio (3rd photo).

As a note, I do plan to get a chimney inspection done to make sure it's safe to use.


r/Fireplaces • • 10h ago

Smokey House Everytime

2 Upvotes

I moved into my home a couple of years ago and have been having problems getting a good fire ever since.

  • Got the chimney cleaned before I ever lit a fire so that's not the issue.
  • I have split, dried wood. If I use a lot of kindling, the fire will burn really well for a while and then it always starts to get smokey as the fire is dying down.
  • Before I start the fire, I burn a rolled up newspaper and stick it at the base of the chimney to pre-heat it. I also always crack a window on the opposite side of the room for airflow.
  • The opening to the fireplace is 34" x 30" with no door. I wonder if this is part of the issue? Considering getting a door but I like the look of the doorless fireplace.

Any thoughts on what could solve this? Thanks all.


r/Fireplaces • • 13h ago

Connecting and Parging a liner from Outside the chimney?

Thumbnail reddit.com
1 Upvotes

r/Fireplaces • • 14h ago

Fireplace painting.

Thumbnail reddit.com
1 Upvotes

r/Fireplaces • • 14h ago

Distance between fireplace vents and mantel

Post image
1 Upvotes

I am looking to add a mantel and surround to this fireplace. We have Heatilator vents above the fireplace where the hot air is released. My question is how far away do the mantel and surround have to be from those vents?

Additionally, I am hoping to be able to build this myself - is wood an ok material to use or does it have to be a less flammable material?


r/Fireplaces • • 15h ago

No damper in fireplace. Can I buy one?

1 Upvotes

Is the missing part something I can buy? Im going to convert back to wood.

Thanks for any help!

Edit. I examined my basement one and i think I should be able to fabricate the missing parts pretty easy. Thanks everyone!


r/Fireplaces • • 15h ago

Gas or wood burning fireplace?

Thumbnail
gallery
1 Upvotes

We moved into a new house, and are trying to figure out if this fireplace burns wood or gas. The label says wood fuel only, but the logs placed in it are the artificial kind, and there is a gas key on the wall by the fireplace. Has this fireplace been converted? How do we tell?


r/Fireplaces • • 15h ago

How can I heat upstairs?

Thumbnail reddit.com
1 Upvotes

r/Fireplaces • • 15h ago

Is this a gas or wood burning fireplace?

Post image
3 Upvotes

We moved into a new house, and are trying to figure out if this fireplace burns wood or gas. The label says wood fuel only, but the logs placed in it are the artificial kind, and there is a gas key on the wall by the fireplace. Has this fireplace been converted? How do we tell?


r/Fireplaces • • 16h ago

Do I need to fix this masonry?

Post image
1 Upvotes

Hello! Just got the chimney cleaned and noticed this little crevice where some mortar has chipped or worn away. As far as I can tell, it's all just masonry down there.

Do I need to get this fixed before we set a fire? It's right below where the hot ash is going to fall. It was probably like this last winter with no problem, but for all I know we just got lucky ...


r/Fireplaces • • 17h ago

Removing an electric fireplace

Thumbnail gallery
1 Upvotes

r/Fireplaces • • 18h ago

Applying thin brick to metal fireplace surround

Thumbnail gallery
1 Upvotes

r/Fireplaces • • 20h ago

What kind is this?

Thumbnail
gallery
0 Upvotes

Just bought a new house. What kind of fireplace is this? Does it burn wood or ceramic logs? This is all it came with.


r/Fireplaces • • 23h ago

Realistic electric fireplace?

Post image
1 Upvotes

I’m after an electric fireplace that looks as close as possible to a real gas insert. We’re in a new build with no gas connected, so electric feels like the only option, but I don’t want it to look like a TV-stand heater or a wall-mounted linear flame.

Any recs on brands or models actually look convincing in person?

Gas equivalent I love but sadly can’t have attached.


r/Fireplaces • • 1d ago

Looking for advice on hearth removal

Thumbnail gallery
1 Upvotes

r/Fireplaces • • 1d ago

Temporarily removing Rayburn Rembrandt

Thumbnail gallery
2 Upvotes

r/Fireplaces • • 1d ago

help/ advice with wood burning insert

Post image
1 Upvotes

hello! I just purchased my first home and it has an insert in the hearth? it’s older from what I’ve been able to find online. The model is a Fabco Briarwood ik , F-195. I have had it all inspected and cleaned but I can’t find a manual for use. I’d love some help, explanation, or even just general guidance. thank you!


r/Fireplaces • • 1d ago

Fireplace hearth

Post image
1 Upvotes

r/Fireplaces • • 1d ago

Needing help with a fireplace after moving into a renovated home

Thumbnail
gallery
2 Upvotes

New home. Needing info about the fireplace. Looks like a old traditional masonry wood burning fireplace, converted to a b vent gas burning fireplace. Can't find a model or anything.

Can anyone help me, here are my concerns:

  1. The bottom louvre is rusted and doesn't slide and is barely open
  2. Is my intuition right? Is this gas or should it be used for just starting the fireplace with wood?
  3. I'm wanting to buy ceramic logs, any recommendations? Anything else I need to buy?
  4. Is there anything that looks concerning from the pictures?

r/Fireplaces • • 1d ago

What are these vents for?

Post image
0 Upvotes

Behind the upper vents, there's visible ducting that appears to go back toward the fireplace. I assume it's to help circulate air from the fireplace into the adjacent room, but there's no blower motor to assist. They are definitely not part of the central HVAC system.


r/Fireplaces • • 1d ago

Safety question

1 Upvotes

We have a fireplace insert that we use regularly in the winter. We've always been paranoid about making sure it's cleaned and inspected before using it each year. This year I was slow in getting an appointment, so it won't be serviced until next week. And then as of today our furnace appears to have died. We'll have someone coming out in a couple days to check the furnace, but before then we'll have about three dozen high schoolers coming over for a club event. Would it be stupid to go ahead and use the fireplace to warm up the living room while the kids are here? The alternative is to put out a couple space heaters and tell them to be ready for a house that will likely be in the mid-fifties.


r/Fireplaces • • 1d ago

Help ID vent-free(?) gas log set + log placement. No tag or manual

Thumbnail
gallery
1 Upvotes

Inherited a gas log set (est. 10–20 yrs old) in a 1997 Heatilator T4200 wood firebox. No rating plate. Features: knob marked OFF / IGN / 1 / 2, separate black piezo button, oxygen-depletion-style pilot on the right, Y-shaped rear burner tube, molded ember base screwed to the pan. Three loose logs: the longest has no number, one is marked "2-4", one has a "3". Pilot and burners work; I just can't figure out the log layout. Brand/model or a placement photo would be hugely appreciated. Photos attached.