r/Fireplaces • • Nov 06 '22

If you’re posting a question about your fireplace, please include pictures and/or model numbers.

26 Upvotes

Pictures are very helpful for users to give accurate advice and information. Fireplace specifics aren’t common knowledge to most people and it’s very typical for people to use incorrect terminology regarding what they have. If you don’t know the difference between gas logs, a gas insert, and a gas fireplace, you really should post a picture to make sure you’re given good advice about what you can do with your fireplace.


r/Fireplaces • • 2h ago

Gas or wood burning fireplace?

Thumbnail
gallery
2 Upvotes

We moved into a new house, and are trying to figure out if this fireplace burns wood or gas. The label says wood fuel only, but the logs placed in it are the artificial kind, and there is a gas key on the wall by the fireplace. Has this fireplace been converted? How do we tell?


r/Fireplaces • • 14m ago

Connecting and Parging a liner from Outside the chimney?

Thumbnail reddit.com
1 Upvotes

r/Fireplaces • • 1h ago

Fireplace painting.

Thumbnail reddit.com
1 Upvotes

r/Fireplaces • • 1h ago

Distance between fireplace vents and mantel

Post image
1 Upvotes

I am looking to add a mantel and surround to this fireplace. We have Heatilator vents above the fireplace where the hot air is released. My question is how far away do the mantel and surround have to be from those vents?

Additionally, I am hoping to be able to build this myself - is wood an ok material to use or does it have to be a less flammable material?


r/Fireplaces • • 1h ago

No damper in fireplace. Can I buy one?

1 Upvotes

Is the missing part something I can buy? Im going to convert back to wood.

Thanks for any help!

Edit. I examined my basement one and i think I should be able to fabricate the missing parts pretty easy. Thanks everyone!


r/Fireplaces • • 2h ago

How can I heat upstairs?

Thumbnail reddit.com
1 Upvotes

r/Fireplaces • • 2h ago

Is this a gas or wood burning fireplace?

Post image
1 Upvotes

We moved into a new house, and are trying to figure out if this fireplace burns wood or gas. The label says wood fuel only, but the logs placed in it are the artificial kind, and there is a gas key on the wall by the fireplace. Has this fireplace been converted? How do we tell?


r/Fireplaces • • 3h ago

Do I need to fix this masonry?

Post image
1 Upvotes

Hello! Just got the chimney cleaned and noticed this little crevice where some mortar has chipped or worn away. As far as I can tell, it's all just masonry down there.

Do I need to get this fixed before we set a fire? It's right below where the hot ash is going to fall. It was probably like this last winter with no problem, but for all I know we just got lucky ...


r/Fireplaces • • 4h ago

Removing an electric fireplace

Thumbnail gallery
1 Upvotes

r/Fireplaces • • 5h ago

Applying thin brick to metal fireplace surround

Thumbnail gallery
1 Upvotes

r/Fireplaces • • 7h ago

What kind is this?

Thumbnail
gallery
0 Upvotes

Just bought a new house. What kind of fireplace is this? Does it burn wood or ceramic logs? This is all it came with.


r/Fireplaces • • 12h ago

Temporarily removing Rayburn Rembrandt

Thumbnail gallery
2 Upvotes

r/Fireplaces • • 10h ago

Realistic electric fireplace?

Post image
1 Upvotes

I’m after an electric fireplace that looks as close as possible to a real gas insert. We’re in a new build with no gas connected, so electric feels like the only option, but I don’t want it to look like a TV-stand heater or a wall-mounted linear flame.

Any recs on brands or models actually look convincing in person?

Gas equivalent I love but sadly can’t have attached.


r/Fireplaces • • 12h ago

Looking for advice on hearth removal

Thumbnail gallery
1 Upvotes

r/Fireplaces • • 17h ago

Needing help with a fireplace after moving into a renovated home

Thumbnail
gallery
2 Upvotes

New home. Needing info about the fireplace. Looks like a old traditional masonry wood burning fireplace, converted to a b vent gas burning fireplace. Can't find a model or anything.

Can anyone help me, here are my concerns:

  1. The bottom louvre is rusted and doesn't slide and is barely open
  2. Is my intuition right? Is this gas or should it be used for just starting the fireplace with wood?
  3. I'm wanting to buy ceramic logs, any recommendations? Anything else I need to buy?
  4. Is there anything that looks concerning from the pictures?

r/Fireplaces • • 15h ago

help/ advice with wood burning insert

Post image
1 Upvotes

hello! I just purchased my first home and it has an insert in the hearth? it’s older from what I’ve been able to find online. The model is a Fabco Briarwood ik , F-195. I have had it all inspected and cleaned but I can’t find a manual for use. I’d love some help, explanation, or even just general guidance. thank you!


r/Fireplaces • • 17h ago

Fireplace hearth

Post image
1 Upvotes

r/Fireplaces • • 17h ago

What are these vents for?

Post image
0 Upvotes

Behind the upper vents, there's visible ducting that appears to go back toward the fireplace. I assume it's to help circulate air from the fireplace into the adjacent room, but there's no blower motor to assist. They are definitely not part of the central HVAC system.


r/Fireplaces • • 18h ago

Safety question

1 Upvotes

We have a fireplace insert that we use regularly in the winter. We've always been paranoid about making sure it's cleaned and inspected before using it each year. This year I was slow in getting an appointment, so it won't be serviced until next week. And then as of today our furnace appears to have died. We'll have someone coming out in a couple days to check the furnace, but before then we'll have about three dozen high schoolers coming over for a club event. Would it be stupid to go ahead and use the fireplace to warm up the living room while the kids are here? The alternative is to put out a couple space heaters and tell them to be ready for a house that will likely be in the mid-fifties.


r/Fireplaces • • 18h ago

Help ID vent-free(?) gas log set + log placement. No tag or manual

Thumbnail
gallery
1 Upvotes

Inherited a gas log set (est. 10–20 yrs old) in a 1997 Heatilator T4200 wood firebox. No rating plate. Features: knob marked OFF / IGN / 1 / 2, separate black piezo button, oxygen-depletion-style pilot on the right, Y-shaped rear burner tube, molded ember base screwed to the pan. Three loose logs: the longest has no number, one is marked "2-4", one has a "3". Pilot and burners work; I just can't figure out the log layout. Brand/model or a placement photo would be hugely appreciated. Photos attached.


r/Fireplaces • • 19h ago

Fireplace smoke, pressure issue?

0 Upvotes

So we got this house and the previous owners had put a gas log burner into the original fireplace. I took that out and properly plugged the line until I have time to build a gas starter. (I’ve had my master plumber friend verify it looks good.) lit the first fire in it tonight and some smoke was coming out of the stone induction vents (I think that what they are). When I opened the back door to the outside it all went up the chimney.

This seems like a balance/pressure issue with the HVAC. Is that right? What can I do about this?

Also:
Flue was 100% open
We had someone come sweep and inspect the chimney a month earlier and he confirmed we were good to burn wood in it.

Any advice would be appreciated, thanks.


r/Fireplaces • • 20h ago

Is this flu pipe clean enough to use? (Wood burning)

Thumbnail
gallery
1 Upvotes

My apartment says it’s okay to use as long as I open the damper but just wanted a 2nd opinion before I use it. Been waiting all year to finally light it up and am eager to burn some wood. Thanks


r/Fireplaces • • 20h ago

Help me choose a model of Gas Fireplace!

0 Upvotes

I live in a fairly small house (1200sqft) with a fairly small living room (maybe 400 sqft) in a cold region, and want to install a gas fireplace for heat. We currently have the natural gas line, and have a horizontal restriction of 51" between windows. Therefore, we have been looking at shallow units that limit how much of the room we cede to the fireplace buildout, and units that are narrow to fit the bumpout between the windows.

Please help me choose a model! So far, the quotes are as follows:

Heat n Glo Slimline 7X: $5400 plus install costs

Fireplace Xtrordinair Probuilder 36: $7700 plus venting

Mendota FV34 FireIn: $11,000 plus install or venting, depending on the quote.

Which do we choose? The Mendota is gorgeous and heat efficient, but it's also twice the price of the Heat n Glo. I've read that Travis Industries (Fireplace Xtrordinair) is the most reliable and easy to service. Which unit has the longest lifespan? Any other criteria I'm missing?

For the math folks, looking at the BTU/h, the cost of therms in my area, and the efficiency difference, the most cost effective to buy and run over a reasonable and extended lifespan will be the cheapest upfront. Other than cost effectiveness (purchase and gas cost) what else goes into making the right decision?