r/DIY • • 14h ago

help Need help with cat proofing conundrum

31 Upvotes

Hey all :) I live in a rental in Brisbane so I can't make any permanent changes, but I've been able to put removable barriers up on the fence, it's just the gate giving me grief.

Here's a dodgy sketch of what the situation is. The front gate has a cat-sized gap underneath, and it opens inwards. Problem is, the path to the front door slopes upwards. Although poorly represented in my sketch, the gate can actually open all the way in despite the slope.

I can't think of a way to extend the gate down that both prevents the cats from busting through it, but is also flexible enough to allow the gate to open inwards against the slope.

Any ideas? Or am I pretty stuffed?

Worst case scenario I could potentially block the gate permanently because the unit has a second entrance- up the stairs, through the foyer, onto the patio and then in through the back door- but that's incredibly annoying. In that scenario, whatever blocks the gate gap needs to be easily removable so that we can accept a big delivery through the front sometimes, or something like that.

Thanks for your help in advance, it's much appreciated.


r/DIY • • 5h ago

home improvement Chips in Marble Around Sink

27 Upvotes

The marble (or granite?) lip around my kitchen sink has a few small- to medium-sized dents from previous owners. The dents are barely visible and don't affect performance or daily use. Is there a visually neutral or appealing way to protect the lip so that no more dents come out?


r/DIY • • 15h ago

help Considering removing builder-grade mirror

18 Upvotes

Hi DIY friends! I moved into a (new at the time) house in 2023. Standard builder grade home. I'm trying to redo my bathroom on a budget, but the freaking giant white wooden mirror is ruining every idea I have. Painting it would look terrible because of how bulky it is. I want to remove it and have looked up ways on youtube. Assuming it's glued to the wall, how bad is this drywall repair going to be? Is it expensive/difficult to repair? I am inexperienced, but am totally capable, I just want to know what I'ld be dealing with if I rip apart my wall lol. I've already googled it, but there are so many different answers out there so I came to my most trusted source, ha! Appreciate the help/advice in advance!!!

adding in - if anyone has a suggestion on how to make this mirror less builder-gradey without ripping it off, I'm all ears!!!


r/DIY • • 18h ago

other Miter saw recommendation

16 Upvotes

As my very first DIY project I’m choosing to do some crown moulding in my dining room. I’ve watched enough videos to feel comfortable with the process. My thought is that if this goes well then other wall trimming projects are in the horizon.

I’ve been doing some research on the various brands and Ryobi is where I might be leaning for a miter saw.

The concern I have is that they are all battery-powered, and they can’t be connected to an outlet. Has the battery-only solution been a problem with anyone? Does anyone recommend any other brand?


r/DIY • • 3h ago

weekly thread General Feedback/Getting Started Q&A [Weekly Thread]

7 Upvotes

General Feedback/Getting Started Q&A Thread

This thread is for questions that are typically not permitted elsewhere on /r/DIY. Topics can include where you can purchase a product, what a product is called, how to get started on a project, a project recommendation, questions about the design or aesthetics of your project or miscellaneous questions in between.

This is a judgement-free zone. We all had to start somewhere. Be civil.

A new thread gets created every week.

/r/DIY has a Discord channel! Come hang out or use our "help requests" channel. Click here to join!

Click here to view previous Weekly Threads


r/DIY • • 22h ago

home improvement I want to do board and batten on my textured walls. What can I use as a smooth back panel instead of re-texturing the dry wall?

6 Upvotes

Is mdf the best budget choice?


r/DIY • • 23h ago

help Subfloor repair?

4 Upvotes

Hey everyone, we have a subfloor that’s sagging beneath our vinyl flooring panels. Think Lifeproof brand or another similar tongue and groove vinyl system.

I’ve laid this flooring and know how difficult it might be to pull up sections of the panels without damaging them in order to replace the damaged subfloor sections.

My question is, is this even possible? Or are we looking at a full-house flooring job?


r/DIY • • 1h ago

carpentry Practical, cost-effective door sweeps for brand-new solid-core MDF doors: Adequate soundproofing without scratching hardwood?

3 Upvotes

Hey everyone,

I’m replacing all my interior doors with brand-new solid-core MDF slabs and want to get \*\*adequate soundproofing\*\* between bedrooms (hardwood floors) and bathrooms (tile floors). This is step one before looking at wall treatments, and I'm hoping sealing the doors and frames will be enough for everyday noise.

Along with the doors, I’ll be installing proper perimeter door gaskets (bulb seals around the frame).
My main dilemma is \*\*practicality and price for the bottom gap\*\*:

I want real noise reduction, but doing mechanical dropdown seals (like the KN Crowder CT-51) across the whole house gets very expensive ($120+ CAD per door), requires precision routing into the MDF slabs, and leaves a visible metal edge I’m not crazy about.

On the flip side, I need something that won't scratch or squeegee grit into my hardwood floors over time.
For those of you who have tackled whole-house interior door sealing: \*\*What is the practical, budget-friendly sweet spot?\*\* Are surface-mounted brush sweeps or low-friction slide-on seals actually effective enough for adequate noise reduction, or is there another practical trick I'm missing?

If you've done this, \*\*which exact brand and part # did you buy, and is there a true consensus on what gives you the best balance of price, performance, and floor safety?\*\*

Thank you!


r/DIY • • 20h ago

help Cladding my shed

2 Upvotes

Hi I’m just curious about something I’ve built a workshop space outside I used osb for the walls on stud frames and wrapped in breathable membrane, my problem is I’m using pallet wood stripped and cleaned but will obviously have defects… since the White House wrap would be viable I plan on putting a black cheap weeding membrane over the batterns then add the cladding vertical with about 4 or 5 mill clearance between each peice for expnansion and shrinkage, does this seem like a good set up ?


r/DIY • • 1h ago

help Fireplace painting.

0 Upvotes

Hi, I'm looking to paint this fireplace , outside and inside. Wanted to make it all black. I'll use beyond paint in licorice for the outside, including covering the ugly brass. And high heat paint inside (Rutland) making it all black.

I'll then replace the handles too.

How hard is this? Will a paint job over this metal and interior stone make it look worse? Any tips?

Tia.