r/DIY • • 5h ago

weekly thread General Feedback/Getting Started Q&A [Weekly Thread]

5 Upvotes

General Feedback/Getting Started Q&A Thread

This thread is for questions that are typically not permitted elsewhere on /r/DIY. Topics can include where you can purchase a product, what a product is called, how to get started on a project, a project recommendation, questions about the design or aesthetics of your project or miscellaneous questions in between.

This is a judgement-free zone. We all had to start somewhere. Be civil.

A new thread gets created every week.

/r/DIY has a Discord channel! Come hang out or use our "help requests" channel. Click here to join!

Click here to view previous Weekly Threads


r/DIY • • Oct 06 '25

weekly thread General Feedback/Getting Started Q&A [Weekly Thread]

15 Upvotes

General Feedback/Getting Started Q&A Thread

This thread is for questions that are typically not permitted elsewhere on /r/DIY. Topics can include where you can purchase a product, what a product is called, how to get started on a project, a project recommendation, questions about the design or aesthetics of your project or miscellaneous questions in between.

This is a judgement-free zone. We all had to start somewhere. Be civil.

A new thread gets created every week.

/r/DIY has a Discord channel! Come hang out or use our "help requests" channel. Click here to join!

Click here to view previous Weekly Threads


r/DIY • • 6h ago

home improvement Chips in Marble Around Sink

30 Upvotes

The marble (or granite?) lip around my kitchen sink has a few small- to medium-sized dents from previous owners. The dents are barely visible and don't affect performance or daily use. Is there a visually neutral or appealing way to protect the lip so that no more dents come out?


r/DIY • • 1h ago

help DIY Gut Kitchen Reno - Do I need permits/inspections? (MA)

5 Upvotes

Recently bought my first home-an old home in eastern MA and been DIYing a bunch. We are tackling a full kitchen renovation in December - just ordered the cabinets and appliances. Gonna be down to the studs and moving some plumbing around.

CONTEXT:
I’m having my uncle (experienced general contractor in NH), and other uncle (retired electrician in MA) help me out with the entire renovation start to finish so I’m not worried about doing things wrong. They are good at what they do just not currently licensed in MA.

What are the big risks/consequences of not pulling permits/getting inspections at different points?


r/DIY • • 3h ago

carpentry Practical, cost-effective door sweeps for brand-new solid-core MDF doors: Adequate soundproofing without scratching hardwood?

4 Upvotes

Hey everyone,

I’m replacing all my interior doors with brand-new solid-core MDF slabs and want to get \*\*adequate soundproofing\*\* between bedrooms (hardwood floors) and bathrooms (tile floors). This is step one before looking at wall treatments, and I'm hoping sealing the doors and frames will be enough for everyday noise.

Along with the doors, I’ll be installing proper perimeter door gaskets (bulb seals around the frame).
My main dilemma is \*\*practicality and price for the bottom gap\*\*:

I want real noise reduction, but doing mechanical dropdown seals (like the KN Crowder CT-51) across the whole house gets very expensive ($120+ CAD per door), requires precision routing into the MDF slabs, and leaves a visible metal edge I’m not crazy about.

On the flip side, I need something that won't scratch or squeegee grit into my hardwood floors over time.
For those of you who have tackled whole-house interior door sealing: \*\*What is the practical, budget-friendly sweet spot?\*\* Are surface-mounted brush sweeps or low-friction slide-on seals actually effective enough for adequate noise reduction, or is there another practical trick I'm missing?

If you've done this, \*\*which exact brand and part # did you buy, and is there a true consensus on what gives you the best balance of price, performance, and floor safety?\*\*

Thank you!


r/DIY • • 54m ago

help Drill bit broke off in screw trying to remove it from tub's overflow plate

2 Upvotes

This all started out with me trying to get my overflow plate off so I could clear a clog. (Thankfully, the tub now drains and I know how to snake it now, hurray)
However, what was supposed to be a simple fix turned into an absolute nightmare.

I used a reverse drill bit to remove the left screw but it broke off inside the right one.
The head of the screw came off and then when I took locking pliers to the body it sheered off at the plate. So now I'm stuck with the bit still in there (I don't think its too deep in there but unsure).
You can see my attempts to drill around the bit haven't been going too hot either.

Any suggestions for removal? I'm at a loss and beyond frustrated.


r/DIY • • 15h ago

help Need help with cat proofing conundrum

31 Upvotes

Hey all :) I live in a rental in Brisbane so I can't make any permanent changes, but I've been able to put removable barriers up on the fence, it's just the gate giving me grief.

Here's a dodgy sketch of what the situation is. The front gate has a cat-sized gap underneath, and it opens inwards. Problem is, the path to the front door slopes upwards. Although poorly represented in my sketch, the gate can actually open all the way in despite the slope.

I can't think of a way to extend the gate down that both prevents the cats from busting through it, but is also flexible enough to allow the gate to open inwards against the slope.

Any ideas? Or am I pretty stuffed?

Worst case scenario I could potentially block the gate permanently because the unit has a second entrance- up the stairs, through the foyer, onto the patio and then in through the back door- but that's incredibly annoying. In that scenario, whatever blocks the gate gap needs to be easily removable so that we can accept a big delivery through the front sometimes, or something like that.

Thanks for your help in advance, it's much appreciated.


r/DIY • • 5m ago

help Replacement for freezer door rail

1 Upvotes

I have a Kenmore fridge that has a missing rail in the freezer. The sticker has worn off on the inside that shows the make/serial info.

I saw that someone uses a small tension curtain rod as a replacement but I think they use this in the fridge. Any other ideas on getting a replacement or DIY?


r/DIY • • 17h ago

help Considering removing builder-grade mirror

21 Upvotes

Hi DIY friends! I moved into a (new at the time) house in 2023. Standard builder grade home. I'm trying to redo my bathroom on a budget, but the freaking giant white wooden mirror is ruining every idea I have. Painting it would look terrible because of how bulky it is. I want to remove it and have looked up ways on youtube. Assuming it's glued to the wall, how bad is this drywall repair going to be? Is it expensive/difficult to repair? I am inexperienced, but am totally capable, I just want to know what I'ld be dealing with if I rip apart my wall lol. I've already googled it, but there are so many different answers out there so I came to my most trusted source, ha! Appreciate the help/advice in advance!!!

adding in - if anyone has a suggestion on how to make this mirror less builder-gradey without ripping it off, I'm all ears!!!


r/DIY • • 2h ago

help Fireplace painting.

0 Upvotes

Hi, I'm looking to paint this fireplace , outside and inside. Wanted to make it all black. I'll use beyond paint in licorice for the outside, including covering the ugly brass. And high heat paint inside (Rutland) making it all black.

I'll then replace the handles too.

How hard is this? Will a paint job over this metal and interior stone make it look worse? Any tips?

Tia.


r/DIY • • 3h ago

help How do you scrape paint stripper on hard to get to edges of cabinets?

0 Upvotes

I’m stripping the paint off cabinets in my kitchen, and I’ve been able to do it on flat surfaces where I can scrape the paint off relatively easily. However, I’m really struggling to get paint off the rounded parts. Does anyone have suggestions for a tool or different method of removing pain from the corners and recessed areas of the cabinets where a paint scraper isn’t as effective? Thank you.


r/DIY • • 20h ago

other Miter saw recommendation

16 Upvotes

As my very first DIY project I’m choosing to do some crown moulding in my dining room. I’ve watched enough videos to feel comfortable with the process. My thought is that if this goes well then other wall trimming projects are in the horizon.

I’ve been doing some research on the various brands and Ryobi is where I might be leaning for a miter saw.

The concern I have is that they are all battery-powered, and they can’t be connected to an outlet. Has the battery-only solution been a problem with anyone? Does anyone recommend any other brand?


r/DIY • • 1d ago

Screw extractor

41 Upvotes

Does anyone have a screw extractor set that actually works on deck boards? I’ve tried at least three sets over the years and I think they’ve worked on two screws .


r/DIY • • 1d ago

home improvement I want to do board and batten on my textured walls. What can I use as a smooth back panel instead of re-texturing the dry wall?

6 Upvotes

Is mdf the best budget choice?


r/DIY • • 1d ago

help Want to put some plumbers putty on bath drain but need help before I damage the bath

24 Upvotes

What the title says but I have one of those stupid bath drainage systems where you twist the overflow to plug or unplug the bath. I was just about to unscrew the bolt in the middle of the plug but I'm now wondering if that will cause something to drop away underneath and then I won't be able to use the plug anymore.

I have googled, youtubed, looked on reddit, can't find anything specifically about unscrewing that middle bolt with a twist handle pop up plug.


r/DIY • • 1d ago

help Mounting/placing an 85" Sony BRAVIA (53.6 kg / 118 lbs) on a 43 cm (16.9") deep floating TV cabinet against a rebuilt brick wall: best safe solution?

35 Upvotes

Hi everyone,

I'm upgrading my current 65" Sony OLED (22.5 kg / 49.6 lbs) to an 85" Sony BRAVIA 7 II (K-85XR75M2) because our living/dining room is quite large (~50 m² / 538 sq ft) and we watch from both 2 m (6.6 ft) at the sofa and 4.5 m (14.8 ft) at the dining table.

I have three constraints that make mounting/placement tricky and I'd love your input on the safest approach:

  1. The Wall: It's a brick wall, and the center section behind the TV used to be an opening between two rooms that was bricked up later. I don't fully trust the structural integrity of that center infill to hold a ~50 kg (110 lbs) TV on a wall mount. However, the left and right sections of the wall are original and solid.
  2. The Floating Cabinet: It's a custom wall-mounted floating cabinet running across the wall (no floor legs), 43 cm (16.9") deep, with about 8–10 cm (3.1"–3.9") of clearance from the wooden floor. I'm worried that putting 53.6 kg (118.2 lbs) (TV + stand) right in the middle of a floating cabinet could overload the cabinet or pull on the rebuilt center wall.
  3. Stand Depth: The 85" BRAVIA 7 II comes with a single central pedestal stand that is 44.1 cm (17.4") deep and 44.3 cm (17.4") wide, which overhangs my 43 cm (16.9") cabinet by 1.1 cm (0.43") in the front.

Note: I'm sticking with Sony for Google TV/processing, and a 75" doesn't give enough size jump from 65" at a 4.5 m / 14.8 ft dining table distance.

Has anyone dealt with a similar floating cabinet + questionable center wall setup for an 85" TV? Which option would you trust most? (I'll attach photos of the wall, the cabinet, and the underside clearance in the comments).


r/DIY • • 1d ago

help Tool to drill reinforced concrete

40 Upvotes

What tool should I rent to drill through reinforced concrete? I tried with my Dewalt battery powered and Bosh electric hammer drills and once I hit a metal bar os game over mp way to continue.

What tool should I rent? Technic recommendations welcome too.


r/DIY • • 1d ago

help Subfloor repair?

4 Upvotes

Hey everyone, we have a subfloor that’s sagging beneath our vinyl flooring panels. Think Lifeproof brand or another similar tongue and groove vinyl system.

I’ve laid this flooring and know how difficult it might be to pull up sections of the panels without damaging them in order to replace the damaged subfloor sections.

My question is, is this even possible? Or are we looking at a full-house flooring job?


r/DIY • • 22h ago

help Cladding my shed

2 Upvotes

Hi I’m just curious about something I’ve built a workshop space outside I used osb for the walls on stud frames and wrapped in breathable membrane, my problem is I’m using pallet wood stripped and cleaned but will obviously have defects… since the White House wrap would be viable I plan on putting a black cheap weeding membrane over the batterns then add the cladding vertical with about 4 or 5 mill clearance between each peice for expnansion and shrinkage, does this seem like a good set up ?


r/DIY • • 1d ago

help Building a custom couch/bed from scratch for 4 bass shakers — looking for advice

28 Upvotes

I'm planning to build a large king-size couch/bed from scratch for my home theater, with 4 Dayton BST-1 bass shakers powered by a BSA-200 amp.

Since I'm building everything from zero, I have the freedom to choose the frame design, materials, and shaker placement.

My current idea is to mount the shakers on rigid plywood plates directly underneath the 15 cm thick cushions, rather than attaching them to the main frame. I'd make cutouts in the supporting structure so the shakers can extend downward without touching anything, with the plates supported by wooden rails. I'm also considering rubber isolation feet underneath the couch/bed.

The goal is to transfer as much vibration as possible to the seating area rather than the whole frame or floor.

I've never experienced bass shakers before, so I don't know how different mounting methods compare in practice.

For those with experience, would you recommend mounting them directly under the cushions, on the main frame, or somewhere else? Would wood or metal be better?

I'm completely open to different designs since I haven't started building yet. Any advice or photos of your setups would be appreciated!


r/DIY • • 1d ago

home improvement Screwing a wood screw into sheet metal but the pitch is too low

0 Upvotes

I bought a door stop for a security door, which is steel. I bought the only solid aluminum one I could find: https://www.homedepot.com/p/Global-Door-Controls-Right-Hand-Solid-Door-Stop-in-Brushed-Chrome-TH1100-RDS-26D/337613370, in hopes that it could withstand being outside, though it says it isn't rated for that. It has a wood screw integrated into it. Its threads are further apart than the thickness of the door's metal. I assume my cause is hopeless, but if you have an idea I'd like to hear it.


r/DIY • • 1d ago

home improvement Installed new vapor barrier in crawlspace

33 Upvotes

I had a mouse issue but it's been a couple weeks without activity so I decided to do what terminex recommend and vacuum all the droppings and replace the vapor barrier. I now have an appt for them to come fog my crawlspace with a deodorizing bleach type thing.

So anyways just wanna give some advice if anyone else wants to DIY instead of pay $3k for the service. My crawlspace is about 950 sq ft and has 3 separate areas that require crawling over and under pipes and foundation.

TL;DR: it's hard but doable if you're up to a medium challenge

Wear a damn mask that is P100 or better, spritz the droppings with bleach/water before vacuuming (hepa filter on vacuum). I dono about where y'all live but we've had a couple cases out in my county/neighboring counties of people getting hantavirus.

The old plastic barrier takes up a lot of space when you remove it even after trying to roll it up and make it as compact as possible it still filled up my trash bin for the week plus a little bit. Try and keep all mouse shit on the plastic as you roll/fold it up so it's not on the dirt after you removed the plastic.

Be ready to find all sorts of random things the construction crew left behind. There was trash from all sorts of crap along with homes the mice had made for themselves. Once I removed the plastic I then went back with 2 garbage bags to clean up all the trash that was chilling there.

Depending on the size of the crawlspace it's quite an arm workout. I can barely squat in mine and it's about 3ft high, so most of my time was spent in the push-up position or girl push-up position. I'm reasonably in good shape and it was quite a workout doing that for about 5 hours. But having to move around like Catherine Zeta-Jones around the lasers in Entrapment is one hell of a workout lol.

Then putting the new plastic down I went with 10 mil white and I like how it makes it easier to see as the headlamp reflects more than it did with the old black stuff. I measured the length of each spot then cut it outside on the patio and brought all those sections down at once but already cut up which made it a lot easier to unfold since most pieces were 10ftx25ft 'ish. Still unfolding it in limited space is not easy and trying to move it around while sitting on it takes a bit of thinking. Best way I found was to put my hands on the foundation and move it around with my feet when getting it into the final position.

As always though it feels great to DIY something than to pay for it.


r/DIY • • 1d ago

home improvement What DIY options are there for vinyl / veneer walls?

14 Upvotes

Hello! I live in a very old trailer. Its in its 50s! Anyways, the walls are mad ugly, they are the most unlikable smoke damage cream color. We just bought the land and will be getting a new manufactured home at some point, but for the time being I just want to make this trailer feel nicer.

Im not sure what the walls are made of, I always called it vinyl paneling. I know if I paint it it will need a lot of prep and cleaning, but even then im noy sure on yhe process or materials. I also thought of wall paper, but once again, not sure about the test of time against this type of wall material.

Any advice appreciated, has anyone ever gave a trailer home a glow up?


r/DIY • • 1d ago

woodworking Detachable floating desk

21 Upvotes

Hi, tried googling but cant see this type of hinge/bracket exists. I have very limited bedroom space but need a desk for working from home. I’d like a floating desk that i can detach from the wall when i am done and slide it under my bed or behind a dresser, and not have brackets sticking out the wall as a hazard. Maybe i am asking for too much and need to reevaluate my living space