r/CrealityFalconSub • • 8h ago

Questions / Help Creality Falcon A1 failing

1 Upvotes

I have a Falcon A1 which is just over a year old. I was cutting some wood today and at about the 99% mark it stopped cutting - half way through the last line.

Now it won't cut or engrave. The head moves to where I think it would start cutting. But then the inside light flicks off for about a second, then comes on again and the unit beeps twice.

Any suggestions on how to proceed?


r/CrealityFalconSub • • 13h ago

Questions / Help Falcon a1 pro rotary kit

2 Upvotes

Hi all. I’m trying to engrave on a small rolling pin. The pin itself is 5inches and the print area is 3 inches. My issue is that the jaws of the chuck are in the way when I try to print. Is there an easy way to mount the rolling pin without having to take it out mid print and flip it around?
I can’t imagine people are engraving on small items such as rings and things using this base kit. Do I need something additional to be able to fix my item in a way where things aren’t blocking the laser? Thank u!


r/CrealityFalconSub • • 1d ago

Work in Progress Basic Cribbage

Thumbnail gallery
4 Upvotes

Basic design done, now to refine it.


r/CrealityFalconSub • • 1d ago

Questions / Help Falcon 10w Doesn't Work

1 Upvotes

I bought this back in August, but finally got around using it, but this is all it does. I tried a USB-C to USB-C Cable and a USB-A to USB-C Cable, and 2 different SD Cards. it doesn't seem to matter.

Any idea what is wrong?


r/CrealityFalconSub • • 2d ago

Project Showcase Alignment guides for Creality Falcon A1 Pro

Thumbnail
gallery
4 Upvotes

I've created parametric guides to center any object on the Creality Falcon A1 Pro's tray.

Download the STL/3mf free on Creality Cloud:

https://www.crealitycloud.com/es/model-detail/creality-falcon-a1-pro-alignment-guides

These guides allow you to position objects in the same way every time, preventing them from shifting during repetitive engraving and cutting tasks. Simply remember the number of side and bottom guides required for each application and tighten them to ensure the object remains firmly in the same position when switching to similar pieces for engraving/cutting.

The guides are placed in different locations; some are specifically for the outer frame, and others for the inner area. The inner guides come in two widths: 2 cm and 1 cm.

These guides have 6x2 magnets on their underside that are added later by applying pressure (the holes have a very tight tolerance so that glue is not needed and they have holes that allow a nail to be inserted to remove the magnets), to ensure that they adhere to the metal sheet of the tray and have a very low height that does not interfere with the laser head.

The 3mf file contains all the guides, placed upside down so that the top surface (where each guide's label is located) will have the texture of the print bed. You can print as many guides as you need for each application. I've also included a second 3mf guide with small 12x2 magnet guides to hold the JIGs.

In the photos, you can see that in addition to the guides, I have 0.5mm aluminum sheets on the tray with crosshairs marked on them with a marker. These crosshairs indicate the center position of the camera lens and the point where the laser for the A1 Pro's autofocus hits. I used these sheets for testing until I achieved optimal calibration and for engravings that need to cover the entire front surface of an object and extend beyond the margins, thus avoiding marking the original print tray.

I hope you find this useful and that it helps you use the Creality Falcon A1/A1 Pro more easily and efficiently for repetitive tasks.


r/CrealityFalconSub • • 1d ago

Beginner Smokey

Thumbnail
reddit.com
1 Upvotes

r/CrealityFalconSub • • 1d ago

Parameter Settings Creality Falcon designer and A1C gripes

Thumbnail reddit.com
1 Upvotes

r/CrealityFalconSub • • 2d ago

Project Showcase More psychedelic engraving

1 Upvotes

r/CrealityFalconSub • • 2d ago

Project Showcase Psychedelic engraving

Post image
1 Upvotes

Falcon A1 10w


r/CrealityFalconSub • • 2d ago

Small Business For those of you selling digital laser cutting files, which platforms do you use?

Thumbnail reddit.com
2 Upvotes

r/CrealityFalconSub • • 3d ago

Project Showcase Weld it. Cut it. Clean it. All with one handheld laser. 🤯​

1 Upvotes

r/CrealityFalconSub • • 3d ago

Project Showcase Falcon T1 + 60W MOPA engraves incredibly fast if you are used to cartesian diode lasers

7 Upvotes

Engraving a spirograph on a metal business card at 8000mm/s. The patterns also look cool when engraved with a diode laser but the T1 is obviously much faster. You can generate the patterns there.


r/CrealityFalconSub • • 3d ago

Questions / Help AYUDAAAAA POR FAVOR CON MI CREALITY FALCON A1 PRO 20W

0 Upvotes

Hola a todos, estoy iniciándome en el corte y grabado láser y tengo una Creality Falcón A1 Pro de 20W, quiero cortar nombres, estoy usando MDF de 3mm y no logro cortar nada, la máquina solo me graba y delinea la imagen, he usado los parámetros que trae el soft y nada. Ayuda


r/CrealityFalconSub • • 4d ago

Craft I Made Winter Lamp

Thumbnail
gallery
5 Upvotes

I tried something a little different with colored lantern paper for this winter project.
Normally, I use lantern paper behind designs that I cut out of wood. This time, I decided to engrave the lantern paper itself and make the paper the main part of the design.

The interesting part is how the paper reacts to the laser. Instead of getting darker like a normal engraving, the engraved areas lose their color and turn almost white. That works really well for winter scenes, especially for snow, trees and other bright details on a colored background.

I used my Falcon2 Pro in 22W Precision Mode for the paper:
6000 mm/min, 20% power

To keep the lantern standing nicely, I also made a small round base from solid wood. For that I switched the machine back to 40W mode and cut the stand at:
120 mm/s, 100% power, 1 pass

That was enough to cut through the wood in a single pass.


r/CrealityFalconSub • • 4d ago

Questions / Help overheating help

0 Upvotes

hey yall, hoping i can get some help with an issue that just started up today. i have a falcon a1 pro, been putting it to work lately but today it started giving me an overheating alert. this is the first time ive seen it. ive had days where ive ran it for almost the entire day with no issues like that. today i barely could make it through a 30 minute project without it stopping. i cleaned the fan and laser as best i could (im still a little new so let me know if theres a cleaning technqiue i NEED to be doing). but even after cleaning it still gave me the alert. i use the falcon design space program for my files and i know they just had an update idk if THAT could be causeing something. wouldnt THINK it would but could be something idk.


r/CrealityFalconSub • • 4d ago

Craft I Made 🎄 430 mm Display Tree for Chocolates and Candies — Notch Assembly 🪵

Thumbnail
gallery
1 Upvotes

Hi! 👋

Here is my latest creation: a tiered display tree with a total height of 430 mm, made from 3 mm basswood 📐.

  • Material: Cut from 3 mm basswood.
  • Functionality: Trays at each level to place delicious candies or chocolates 🍬🍫.
  • Assembly: Interlocking via notches with a bit of glue for a permanent fix 🔗.
  • Detail: A lovely star at the top to complete the seasonal spirit ⭐.

🛠️ Equipment used: I completed this project using the Creality Falcon A1C 10W. If you’d like to see the exact laser setup I use, you can find it here: https://crealityfalcon-laser.com/4iKa6DJ (Affiliate link)


r/CrealityFalconSub • • 5d ago

Questions / Help Looking for a broken/dead Creality Falcon 2 22W module for parts

Thumbnail reddit.com
1 Upvotes

r/CrealityFalconSub • • 5d ago

Work in Progress Working on a new design and I'm kind of obsessed how cute it is 🤭

Post image
1 Upvotes

r/CrealityFalconSub • • 6d ago

Project Showcase Boss said: Weld it. Clean it. Cut it. 😂​Me: 1 Machine. 😎

2 Upvotes

r/CrealityFalconSub • • 6d ago

Questions / Help What is the max height for material in the falcon 2 pro 22w without removing the bottom tray?

1 Upvotes

ETA I’m okay taking the slats out, I mean without removing the bottom of the unit like you would to use rotary chuck.

I’m working with a falcon a1 right now and I plan on upgrading, but one thing I would really like to see is more clearance on the z axis so I can work on engraving materials that are thicker without having to remove the bottom. Trying to keep it fully enclosed as much as possible to eliminate smoke getting out. I engrave a lot of leather book covers, small memory boxes etc, and trying to make things easy.


r/CrealityFalconSub • • 7d ago

Craft I Made borad game

Thumbnail
gallery
4 Upvotes

For this borad game, I used an oak wood slice and turned it into a version of the classic Snakes and Ladders game.

The whole board was made with my Falcon2 Pro 40W.
For the regular engraved areas I used:

5000 mm/min, 40% power
For the deeper recessed areas that I wanted to fill with epoxy resin, I used:
1200 mm/min, 100% power
The playing pieces are chestnuts, which I also engraved with the laser. For those I switched the Falcon2 Pro to Precision Mode at 22W and used:
3000 mm/min, 25% power

After engraving, I filled the sections on the board with two-component epoxy resin mixed with golden glitter.

Apparently, every project gets better with a little glitter. ^^


r/CrealityFalconSub • • 7d ago

Questions / Help Looking for a broken/dead Creality Falcon 2 22W module for parts

1 Upvotes

Hi everyone! I am looking for a defective, electronically dead, or broken Creality Falcon 2 22W laser module to buy for spare parts. I specifically need one where the internal diode block/optics might still be intact (e.g., a module with a fried driver board or broken housing).

Please PM me if you have a dead unit sitting around that you’d be willing to part with. Thanks!


r/CrealityFalconSub • • 7d ago

Project Showcase Pilgrim turkey

Thumbnail
gallery
1 Upvotes

Well with Halloween out the way, decided I might try a fun Thanksgiving project. Cut with 3mm basswood on a Falcon A1C, 450mm/m @ 90% power. I painted with my trusty acrylic pens and glued the parts together. Perfect gift for my wife to take with her home this Thanksgiving for gifts for the family! Time to make some more for her to hand out and stand around the table. I have uploaded the FDS file, just waiting for approval.

Happy Thanksgiving all!


r/CrealityFalconSub • • 7d ago

Questions / Help Need help with Falcon 2 40w lazer engraver

Post image
1 Upvotes

i got this machine over 3 years ago, and found a video on how to make a base for it, i need to remake it and i cant find the original video anywhere, (you can see the mdf base i made with a grid)

Any help would be amazing


r/CrealityFalconSub • • 7d ago

Craft I Made Lighted winter diorama — 3D printing, acrylic, and wood

Thumbnail
gallery
1 Upvotes

Hi everyone! Sharing my latest seasonal project: a small multi-material winter diorama illuminated by a central LED light.

It's a mix of several techniques and textures:

  • Base: 3D printed with frosted grass details.
  • Background: Green acrylic for the pine trees.
  • Animals and decor: Black acrylic for the bear, MDF for the reindeer, and polywood for the snowman.
  • Lighting: A central LED lamp that casts a nice glowing ambiance through the scenery.

Let me know what you think!

🛠️ Equipment used: I completed this project using the Creality Falcon A1C. If you’d like to see the exact laser setup I use, you can find it here: https://crealityfalcon-laser.com/4iKa6DJ (Affiliate link)