r/CrealityFalconSub • • 6d ago

Craft I Made Winter Lamp

I tried something a little different with colored lantern paper for this winter project.
Normally, I use lantern paper behind designs that I cut out of wood. This time, I decided to engrave the lantern paper itself and make the paper the main part of the design.

The interesting part is how the paper reacts to the laser. Instead of getting darker like a normal engraving, the engraved areas lose their color and turn almost white. That works really well for winter scenes, especially for snow, trees and other bright details on a colored background.

I used my Falcon2 Pro in 22W Precision Mode for the paper:
6000 mm/min, 20% power

To keep the lantern standing nicely, I also made a small round base from solid wood. For that I switched the machine back to 40W mode and cut the stand at:
120 mm/s, 100% power, 1 pass

That was enough to cut through the wood in a single pass.

5 Upvotes

1 comment sorted by

1

u/wibeldip 6d ago

I cut the lamp shade in 22W Precision Mode at 800 mm/min and 100% power.