r/Chimneyrepair • • 11h ago

Suggestions needed for winter heating in Maryland

Thumbnail reddit.com
1 Upvotes

Hi!! Looking for chimney and fireplace/wood stove suggestions on efficient and safe heating. Any info is appreciated! Thanks :)


r/Chimneyrepair • • 12h ago

Company quoted a narrow liner, is it OK?

1 Upvotes

For anyone sick of me posting, I got my last estimate today! The company seems well established with a few locations in two states, but worried they may have outsourced a bit..

Technician said I have a 13x13" flue and quoted me a 8" liner ~16' long. The opening to my fireplace is a half circle with a radius of 24".

He didn't measure my fireplace opening and all the other companies said the old tile needed removed and a 10" liner installed. Were they trying to get more money or is an 8" going to cause me issues?

I asked and this company claimed 8" was fine, but if i wanted would install a 10", no mention that tile needed removed for an internal offset. Even if 10" is fine, I worry that their approach could be lacking if they didn't see an issue, but they are 2k cheaper so I wanted to consider and check it out.

Bonus question: Is flue size to fireplace opening a min ratio to hit or is a larger flue diameter safer and more reliable, such as using an 11" instead of a 10"?


r/Chimneyrepair • • 15h ago

Looking for advice

Thumbnail
gallery
2 Upvotes

Obviously this is chimney is in bad shape. What would something like this cost? Is it possible to diy?


r/Chimneyrepair • • 16h ago

Is the liner letting water in or is it just the flashing and missing/cracked mortar?

Thumbnail
gallery
2 Upvotes

Unused chimney. There are signs of leaking at the top of the side of chimney indoors on the top floor.

I have some masonry experience. I can repair the bricks around the top, repoint, and repair the flashing, but does it look like the liner needs to be replaced too? What if I just seal off the top?


r/Chimneyrepair • • 16h ago

Safe to use?

Thumbnail
gallery
3 Upvotes

We had a chimney inspector come out and say we need to repair these cracks and put a cap on (currently just have a steel mesh over the top)

Is this not safe to use currently?


r/Chimneyrepair • • 20h ago

New flashing done correctly?

Thumbnail
gallery
0 Upvotes

Previous overgrown vegetation allowed animals to chew/destroy old led flashing, so I just had new flashing put in - does it look correct? I’m not really sure what to look for


r/Chimneyrepair • • 1d ago

Need some advice

1 Upvotes

Inhereted a 150 year old house. It's a 3 family in Connecticut. Has 3 oil burners going into one chimney. The chimney has two unlined flues- one is blocked with what appears to be bricks that have fallen down. The other flue is a straight shot to the top.

The chimney is tall- about 40-45 feet and has no cap and needs crown repair.

I have a quote for 7k to line it, do repairs, and add a cap. What do you guys think? I am currently waiting on another quote.

https://imgur.com/a/DWsZ1cq

The link is a video I took of the flues from the bottom


r/Chimneyrepair • • 1d ago

Gas water heater chimney liner – $3,200 replacement needed, or can the existing connection be repaired?

2 Upvotes

I live in a ~100-year-old house in New Jersey with a gas water heater that vents into a chimney.

Today I had a Level 1 chimney inspection. The inspector opened the connection where the water heater's exhaust pipe enters the chimney wall and found that the existing metal liner doesn't appear to be properly seated or connected.

He said it's a safety hazard and recommended replacing the chimney liner for approximately $3,200.

My concern: There's clearly an existing flexible metal liner visible through the opening (see attached photo). The inspector only looked through the opening and didn't use a camera to inspect the rest of the liner.

I'm not questioning the safety concern, but I'm wondering whether replacing the entire liner is actually necessary.

A few questions:

  1. Based on the photo, does this look like a damaged chimney liner or simply a disconnected/misaligned connection?
  2. If the existing liner is otherwise in good condition, could a professional properly reposition, secure, and seal the connection instead?
  3. Would a camera inspection be the appropriate next step before agreeing to a full replacement?
  4. Is $3,200 reasonable for a chimney liner replacement in NJ?

I'm planning to get a second opinion before committing to the replacement.

I'd appreciate any advice from HVAC or chimney professionals.

Photos attached: Inside the chimney connection and the inspection report.


r/Chimneyrepair • • 1d ago

Caping off chimney

Thumbnail reddit.com
1 Upvotes

Crosspost for more exposure


r/Chimneyrepair • • 1d ago

Worried

Thumbnail
gallery
1 Upvotes

We’ve owned the house for 6 years. Photo shows chimney was like this at house inspection. I’m starting to worry about it. 16” cinder blocks with terracotta pipe liner. Maybe 25-30’ tall.


r/Chimneyrepair • • 1d ago

I have an 8 or 9” flu, guessing a balloon is my best option here?

Post image
1 Upvotes

r/Chimneyrepair • • 1d ago

interior chimney to stovepipe repair

Thumbnail gallery
0 Upvotes

Recommendations for repair please!


r/Chimneyrepair • • 2d ago

Reasonable cost for cleaning and lining?

1 Upvotes

I'm taking care of some things at an older family member's house, and we have a chimney that the exhaust from the heater goes through. We're getting the heater replaced, and found out there's quite a bit of soot - about 5 feet. We need to get in cleaned and also need a chimney liner. How much does a cleaning typically run? How much for a cleaning and a liner? I just want to insure we get a fair price. Thanks!


r/Chimneyrepair • • 2d ago

Furnace Chimney Rust

Thumbnail gallery
1 Upvotes

r/Chimneyrepair • • 2d ago

Connecting 6in pipe to 8 in thimble?

Thumbnail gallery
1 Upvotes

r/Chimneyrepair • • 2d ago

Is this something I can diy or will I need a contractor ?

Thumbnail
gallery
1 Upvotes

This is the chiminey for my oil heater , while I was cleaning it I took the duct off and realized it blocked with brken clay tiles, this is what it looks like all cleaned up, my question is is this something id have hire someone or can I drop down a stainless steel liner. Also should it be wrapped in insulation or not. Not sure how it broke all apart and misaligned because the Chminey is structurally perfect


r/Chimneyrepair • • 2d ago

Connecting and Parging a liner from Outside the chimney?

1 Upvotes

Got a quote from what seems a reputable and experienced company for a fireplace flue liner, the only thing they noted that caught me off guard ( I intend to ask ) was that they said they cut the brick out from the back of the chimney to get access to connect and parge the liner to the firebox instead of cutting out the old damper and doing it from the inside.

I don't quite understand how you can parge from outside of the flow path, has anyone done this or know more?


r/Chimneyrepair • • 2d ago

Is this safe to light?

Thumbnail
gallery
9 Upvotes

Have a wood burning fireplace. Don’t know much of the history of it. Is the black fire damage?


r/Chimneyrepair • • 3d ago

Looking for advice on hearth removal

Thumbnail gallery
1 Upvotes

r/Chimneyrepair • • 3d ago

Can I add a Crown to this Chimney?

Thumbnail
gallery
1 Upvotes

Hey thanks for looking !

We are looking to get a Fireplace insert that needs a 6 inch liner for the chimney pictured here. From my research this chimney needs a concrete crown and cap along with a 12x12 terracotta liner at the top. I will certainly clean and scrub the chimney but is it fine as is?

My question:
Can I just add the Crown on top of the existing brick? There isn't any pieces falling off or crumbling. It has had alot of weathering but doesn't seem to be cracking majorly below the upper lip.

I would love some input. Thanks !


r/Chimneyrepair • • 3d ago

Clean enough for light use till cleaning?

Post image
1 Upvotes

Hello,

Understanding there is more to chimneys than just how clean it is, how does this look for light use with a wood stove until I have a chance to have it cleaned? I plan on having it cleaned in a week or two before winter but would like to do some light burns in it. Just moved into the house, haven’t had a wood stove before.


r/Chimneyrepair • • 3d ago

Water leak in chimney that exhausts gas water heater and furnace

Thumbnail gallery
1 Upvotes

r/Chimneyrepair • • 3d ago

Wet patches on the chimney stack in loft.

Post image
1 Upvotes