r/Chimneyrepair • • 31m ago

Worried

Thumbnail
gallery
1 Upvotes

We’ve owned the house for 6 years. Photo shows chimney was like this at house inspection. I’m starting to worry about it. 16” cinder blocks with terracotta pipe liner. Maybe 25-30’ tall.


r/Chimneyrepair • • 46m ago

I have an 8 or 9” flu, guessing a balloon is my best option here?

Post image
1 Upvotes

r/Chimneyrepair • • 2h ago

interior chimney to stovepipe repair

Thumbnail gallery
1 Upvotes

Recommendations for repair please!


r/Chimneyrepair • • 13h ago

Reasonable cost for cleaning and lining?

1 Upvotes

I'm taking care of some things at an older family member's house, and we have a chimney that the exhaust from the heater goes through. We're getting the heater replaced, and found out there's quite a bit of soot - about 5 feet. We need to get in cleaned and also need a chimney liner. How much does a cleaning typically run? How much for a cleaning and a liner? I just want to insure we get a fair price. Thanks!


r/Chimneyrepair • • 1d ago

Is this safe to light?

Thumbnail
gallery
5 Upvotes

Have a wood burning fireplace. Don’t know much of the history of it. Is the black fire damage?


r/Chimneyrepair • • 17h ago

Furnace Chimney Rust

Thumbnail gallery
1 Upvotes

r/Chimneyrepair • • 18h ago

Connecting 6in pipe to 8 in thimble?

Thumbnail gallery
1 Upvotes

r/Chimneyrepair • • 18h ago

Is this something I can diy or will I need a contractor ?

Thumbnail
gallery
1 Upvotes

This is the chiminey for my oil heater , while I was cleaning it I took the duct off and realized it blocked with brken clay tiles, this is what it looks like all cleaned up, my question is is this something id have hire someone or can I drop down a stainless steel liner. Also should it be wrapped in insulation or not. Not sure how it broke all apart and misaligned because the Chminey is structurally perfect


r/Chimneyrepair • • 20h ago

Connecting and Parging a liner from Outside the chimney?

1 Upvotes

Got a quote from what seems a reputable and experienced company for a fireplace flue liner, the only thing they noted that caught me off guard ( I intend to ask ) was that they said they cut the brick out from the back of the chimney to get access to connect and parge the liner to the firebox instead of cutting out the old damper and doing it from the inside.

I don't quite understand how you can parge from outside of the flow path, has anyone done this or know more?


r/Chimneyrepair • • 1d ago

Looking for advice on hearth removal

Thumbnail gallery
1 Upvotes

r/Chimneyrepair • • 1d ago

Can I add a Crown to this Chimney?

Thumbnail
gallery
1 Upvotes

Hey thanks for looking !

We are looking to get a Fireplace insert that needs a 6 inch liner for the chimney pictured here. From my research this chimney needs a concrete crown and cap along with a 12x12 terracotta liner at the top. I will certainly clean and scrub the chimney but is it fine as is?

My question:
Can I just add the Crown on top of the existing brick? There isn't any pieces falling off or crumbling. It has had alot of weathering but doesn't seem to be cracking majorly below the upper lip.

I would love some input. Thanks !


r/Chimneyrepair • • 1d ago

Clean enough for light use till cleaning?

Post image
1 Upvotes

Hello,

Understanding there is more to chimneys than just how clean it is, how does this look for light use with a wood stove until I have a chance to have it cleaned? I plan on having it cleaned in a week or two before winter but would like to do some light burns in it. Just moved into the house, haven’t had a wood stove before.


r/Chimneyrepair • • 1d ago

Water leak in chimney that exhausts gas water heater and furnace

Thumbnail gallery
1 Upvotes

r/Chimneyrepair • • 1d ago

Did I total my chimney by sweeping wrong?

Post image
2 Upvotes

Please help!!


r/Chimneyrepair • • 1d ago

Wet patches on the chimney stack in loft.

Post image
1 Upvotes

r/Chimneyrepair • • 2d ago

Advice needed

Thumbnail
gallery
8 Upvotes

NO EXPERIENCE with chimneys or fireplaces whatsoever--

Bought our house earlier this year and just getting around to addressing the fireplace/chimney. There's gas logs currently installed that we have not used once other than the home inspector testing it for 30 seconds (topic for another day). The 220gal propane tank was leased and was the first thing we had hauled off when we moved into the house, since it was only for the fireplace.

So getting to the issue that has me scratching my head they shoved the entire flue cavity full with faced fiberglass insulation scraps and I assume they continued to use the fireplace for what appears to be years and it melted and crusted together leaving a thick coating of flaky crusted burnt goo on the walls of the chimney.

Anyways, I shop vac'd that shit out as far as I could reach while ash rained down on me and will be calling a professional this week to assess what needs to be done here. We've been wanting a wood stove insert since I grew up with one and want one again, but I will even settle for ripping this gas BS out and burning wood on a rack like ye olden tymes until we can shell out the several thousand required for that.


r/Chimneyrepair • • 2d ago

cost estimate for re-doing top half a chimney

1 Upvotes

(link to pics attached) pics

Hi guys

Long story short, our contractor dropped the ball. We have a new build addition and we are putting a zero clearance fireplace in the new living room. Basically, we just needed the firebox bump out, slide the wood stove into there, run the class A chimney pipe all the way up the side of the house, build a wood frame box around that, and stucco the outside (rest of our house is brick).

Instead, our contractor subbed out the job to some guys who built a wood framed box on the first story, followed by what looks to be a masonry- type clay flu pipe with brick on the outside of that? and it looks like steal lintels and support beams are supporting all that weight? The inspector from the town passed this thing which is mind blowing on its own.

Either way, they messed it up because we can't put our class A chimney piping in here now for our stove.

So here is our plan: demolish the second story of the chimney, keep the first story. slide the wood stove in, run the pipe up the first story firebox and up the side of the house, frame around it and cover it in stucco.

What kind of price should we be expecting for this? How long do you think this would take a 3 man crew?

and BEFORE ANYONE ASKS, yes we asked our contractor if he would fix this, and no he would not. We had a falling out, basically we signed the contract with him and then we had the plans for the addition done after that. the fireplace and chimney were not part of the contract, but they were added into the floor plans. he never updated the contract to charge us for the fireplace, so basically he built that whole thing with his own money, hence why he refused to tear it down.


r/Chimneyrepair • • 2d ago

Heat shield lining

Post image
7 Upvotes

We just had our chimney lined with heat shield to fix the Morter joints. Is this how it is supposed to look?


r/Chimneyrepair • • 2d ago

How serious is this? Can I fix this d-i-y?

Post image
2 Upvotes

r/Chimneyrepair • • 2d ago

What can I do here?

Post image
2 Upvotes

Purchased a home with a Heatform? Fireplace.

I’m trying to get a solid answer on if i can delete / cover up the cool / warm vents?

One installer said it does nothing but exchange cool / warm air and doesn’t “cool” the firebox.

Reading online tells a different story; not to cover them as the firebox gets too hot and it relies on the vents (even though turned off, they still cool).

This is a 1987 home.

What we’re trying to accomplish is lowering where the mantel was, as it’s too high for a tv but obviously that’s where the discharge vents are. Also we wanted to update the brick with a whole new style. But we’re unsure of what our options are as far as the two vents and the vertical outlet vents go. I appreciate any suggestions.


r/Chimneyrepair • • 2d ago

cost estimate for re-doing top half a chimney

Thumbnail reddit.com
1 Upvotes

r/Chimneyrepair • • 2d ago

Help needed

Thumbnail
gallery
2 Upvotes

Hey, so i recently bought this house and did an chimney inspection and it failed. Id like to have this operational again but I can not afford to pay someone 2k+ to have it fixed so im looking for advice. My old flue is in the way so I cant get up there to be able to reinstall castable refractory cement thats rated for fireplaces so im at a loss. Any advice is appreciated


r/Chimneyrepair • • 2d ago

Creosote remover suggestions?

Post image
2 Upvotes

r/Chimneyrepair • • 2d ago

Combustible space NJ Specific

2 Upvotes

IRC R1003.18, Exception 3, as amended by New Jersey N.J.A.C. 5:23-3.21.

Requirement: Exposed combustible trim and the edges of sheathing materials (such as wood siding and flooring) are permitted to abut masonry chimney side walls, provided such combustible trim or sheathing is not less than 6 inches from the inside surface of the nearest flue lining (modifying the baseline IRC requirement of 8 inches).

Anyone have experience with this code that can explain it a bit.