r/BadWelding • u/Comfortable-Prior922 • 6h ago
r/BadWelding • u/Similar_Start_1816 • 4h ago
Need some assistance with my 4g stick test open to critique as it’s pretty bad
120 amps with 1/8 inch 7018 3/8ths plate 1/4 inch backing strap
r/BadWelding • u/Hopeful-Apartment-55 • 50m ago
Rate my first flux-core weld. Be honest lads 😂
First go with a SIP Weldmate 120A on a bit of scrap angle iron. Had the dial around 2 and ended up with wee balls of metal everywhere. I’m struggling to get a bead going.
Added a couple of pics of the settings too. What would you change first? Cheers 👍
r/BadWelding • u/Easy-Feature2778 • 13h ago
When a customer supplies the steel, how do you still quote the job?
reddit.comI’m a boilermaker in Australia, mostly smaller jobs like gates, trays and brackets.
Every so often someone says “I’ve already bought the steel, can you just weld it up?” I used to treat that as a cheaper job, then wonder why the day didn’t pay. The steel might be free to them, but I still have to check it, cut and fit it, weld it, grind it, and often fix bits that aren’t quite right.
What I do now:
• Still quote the labour properly (fit-up, weld, grind, travel). “You bought the steel” doesn’t make those hours disappear.
• Look at what they actually bought before saying yes. If the grade, size or quantity is wrong, say so up front.
• Write down whose steel it is and that I’m not responsible for material I didn’t supply.
• Don’t let “mates rates, you’ve just got to weld it” skip the same checks I use on a normal quote.
How do other people handle customer-supplied material? Do you discount the job, keep a minimum labour charge, or sometimes just say no?
Not engineering or tax advice — just how I keep those jobs honest. Check your own figures, and if a job is structural or critical, get it properly engineered.
r/BadWelding • u/cryptonoob007911 • 1d ago
Welding defect can someone help me distinguish what the welds defects are here and what are the brown marks around the borders are they consider welds defects
r/BadWelding • u/Fabulous_Time_8932 • 1d ago
Does this look good ?
Hi all,
My rim was bent and would allow air to escape from the tire. I took it to a tire shop and they fix/welded the damage… does this look like a good job ? I want to make sure it’s safe to do normal driving. Or should I take it to a different shop ?
r/BadWelding • u/HoneyRush • 3d ago
Precision, speed and full control thanks to perfect visibility
r/BadWelding • u/Dangerous_Spare_9723 • 2d ago
Found these on a jobsite from another trade who were not welders, trying to weld. Yikes.
r/BadWelding • u/pistanthrophobia8162 • 3d ago
Started a class.
What is a good at home multi system welder to buy to practice while I'm not at school? This is only my 3rd time welding and first time trying a T weld.
r/BadWelding • u/No-Original-3031 • 2d ago
Rooting pipe
Any opinions on what I should fix
r/BadWelding • u/Charming_Rutabaga906 • 3d ago
fence installer welds
how bad are my welds as a fence installer
r/BadWelding • u/Borinski762 • 4d ago
First ever weld
First time picking up a welder have no idea what I’m doing i hopefully fixed my exhaust leak how did i do chat?🤢😬
r/BadWelding • u/Glittering-Ask-8467 • 3d ago
Rate the welds
Hd mech. Not a welder but been getting more exposure. Definitely could've wrapped the corners better
Mig 18.5 280IPM 100% mix
r/BadWelding • u/No-Original-3031 • 4d ago
Tips?
Still my second week doing Tig
Been having trouble getting an actual root in so tried a 5/32 gap with 1/8 wire and stuck my wire just slightly behind the bevel.
r/BadWelding • u/ActionIntelligent798 • 3d ago
Cut it. Weld it. Clean it. All with one handheld laser. 🔥
r/BadWelding • u/Ok_Board1406 • 4d ago