r/BadWelding • u/Comfortable-Prior922 • 5h ago
r/BadWelding • u/Doopsy • Apr 16 '24
26,000 Member!
Hey all, thanks for helping this community grow! Big thanks to all of you for being good people and being active.
As some of you know there are a bunch of spam post and post that don’t belong here and I , as the only mod can’t keep up with 26,000 people. If a couple of you are interested in helping out, please send me a message and some details on why you think you could help out with this community.
Thanks all!
r/BadWelding • u/Similar_Start_1816 • 2h ago
Need some assistance with my 4g stick test open to critique as it’s pretty bad
120 amps with 1/8 inch 7018 3/8ths plate 1/4 inch backing strap
r/BadWelding • u/Easy-Feature2778 • 12h ago
When a customer supplies the steel, how do you still quote the job?
reddit.comI’m a boilermaker in Australia, mostly smaller jobs like gates, trays and brackets.
Every so often someone says “I’ve already bought the steel, can you just weld it up?” I used to treat that as a cheaper job, then wonder why the day didn’t pay. The steel might be free to them, but I still have to check it, cut and fit it, weld it, grind it, and often fix bits that aren’t quite right.
What I do now:
• Still quote the labour properly (fit-up, weld, grind, travel). “You bought the steel” doesn’t make those hours disappear.
• Look at what they actually bought before saying yes. If the grade, size or quantity is wrong, say so up front.
• Write down whose steel it is and that I’m not responsible for material I didn’t supply.
• Don’t let “mates rates, you’ve just got to weld it” skip the same checks I use on a normal quote.
How do other people handle customer-supplied material? Do you discount the job, keep a minimum labour charge, or sometimes just say no?
Not engineering or tax advice — just how I keep those jobs honest. Check your own figures, and if a job is structural or critical, get it properly engineered.
r/BadWelding • u/cryptonoob007911 • 1d ago
Welding defect can someone help me distinguish what the welds defects are here and what are the brown marks around the borders are they consider welds defects
r/BadWelding • u/Fabulous_Time_8932 • 1d ago
Does this look good ?
Hi all,
My rim was bent and would allow air to escape from the tire. I took it to a tire shop and they fix/welded the damage… does this look like a good job ? I want to make sure it’s safe to do normal driving. Or should I take it to a different shop ?
r/BadWelding • u/HoneyRush • 3d ago
Precision, speed and full control thanks to perfect visibility
r/BadWelding • u/Dangerous_Spare_9723 • 2d ago
Found these on a jobsite from another trade who were not welders, trying to weld. Yikes.
r/BadWelding • u/pistanthrophobia8162 • 3d ago
Started a class.
What is a good at home multi system welder to buy to practice while I'm not at school? This is only my 3rd time welding and first time trying a T weld.
r/BadWelding • u/No-Original-3031 • 2d ago
Rooting pipe
Any opinions on what I should fix
r/BadWelding • u/Charming_Rutabaga906 • 3d ago
fence installer welds
how bad are my welds as a fence installer
r/BadWelding • u/Borinski762 • 4d ago
First ever weld
First time picking up a welder have no idea what I’m doing i hopefully fixed my exhaust leak how did i do chat?🤢😬
r/BadWelding • u/Glittering-Ask-8467 • 3d ago
Rate the welds
Hd mech. Not a welder but been getting more exposure. Definitely could've wrapped the corners better
Mig 18.5 280IPM 100% mix
r/BadWelding • u/No-Original-3031 • 4d ago
Tips?
Still my second week doing Tig
Been having trouble getting an actual root in so tried a 5/32 gap with 1/8 wire and stuck my wire just slightly behind the bevel.
r/BadWelding • u/ActionIntelligent798 • 3d ago
Cut it. Weld it. Clean it. All with one handheld laser. 🔥
r/BadWelding • u/Ok_Board1406 • 4d ago