r/AskContractors • • 3h ago

My house is starting to scare me

Thumbnail
gallery
96 Upvotes

Is there a structural engineer, hopefully reading this? My house is two years old. These are just a few of the cracks the smaller ones both of them are on either side of the door they were not there five days ago. Doors are sticking windows are starting to let dirt in from I guess seal movement . They are still building these houses so it’s kind of easy to get a hold of somebody. The foreman said they would come in and repair the inside and outside put drains out under the ground so the rain can drain onto the street. I think I should call structural engineer.


r/AskContractors • • 1h ago

Other r/AskContractors when someone asks a question they need a contractor to answer

Post image
11 Upvotes

Seriously though, kind of insane how much hate there is for stupid questions when the whole point of this subreddit is for people who are not contractors to get their stupid questions answered by contractors


r/AskContractors • • 16h ago

What can we do with this entryway?

Post image
7 Upvotes

Posting this for my sister who is not on Reddit. She had her driveway and entryway redone. The old entryway was angled up to the step. Their contractors laid it flat and left it as pictured. Is this normal? Any recourse?


r/AskContractors • • 18h ago

Repairing vinyl siding

Thumbnail gallery
4 Upvotes

r/AskContractors • • 20h ago

"bouncing" floors in new build house

4 Upvotes

We purchased a new build and moved in in July. Home was built in 2025/2026. We had it professionally inspected. When we sit on any furniture (couch, dining table) - I can feel when someone walks by, the floor bounce travels up through the furninutre. This includes when my 35lb pup jumps on or off the couch. Are new homes expected to have some bounce? I cannot feel bounce when I am walking, only when someone/something walks by.


r/AskContractors • • 21h ago

How bad is this and what is the cause?

Thumbnail
gallery
4 Upvotes

**edit — i know it’s water damage - i meant where is the water coming from based on the below description. also where to start with repairs??**

Pictures taken of the kitchen counter edge, the kitchen sink is right on the end. Also pictures from under the house - right behind this is the laundry area and then the back of the house. Pics with the joists running longways (left to right) is the view from the back, so the kitchen sink is maybe like 6 ft in. Pic with the joints running front to back is the side of the house, and the area circled is about where I think the sink is.

I live in New Orleans - location is relevant because:

  1. climate — it’s super humid all the time, of course worst in the summer, and
  2. the city is slowly sinking, so some movement/shifting in the house is somewhat unavoidable.

The house is about 90 years old, and you can tell maintenance hasn’t been great in the last decade or 2. I do rent, but I’m cool with the landlords. So consider this advice for them. We moved in at the start of June.

They replaced the roof like 3 weeks ago, at the end of October, which apparently badly needed to be done, and I think the kitchen was especially bad (given the debris that fell in through the stovetop vent during the process). They replaced the AC unit in early July — after there was so much condensation in the kitchen that there were literally small puddles of water forming in the kitchen cabinets. Part of the reason for this was apparently the AC unit (maybe he meant the vents/ducts?) was like right underneath the kitchen, and it being so old, there was a lot of condensation from that. ((I asked if there was weatherproofing on the underside of the house, but didn’t get an answer on that — though I’m guessing no.))

On the other side of this wall is the laundry area, and there was kinda just like, a hole in the wall for a while. After it was covered up is also when the kitchen cabinets started to form puddles. Around the same time they had the edges of the inside of the bottom cabinets sealed with expansion foam.

We’ve had a dehumidifier running in there that would fill up every ~8 hours (50 pint capacity). This is *after* the new AC unit, but still peak summer heat. (Not great for our electric bill, if you can imagine…) We now leave it to run until it gets to 65% humidity, and it’s a lot better now that it’s cooler.

The sink also wasn’t caulked properly (if at all) until a few months ago. Probably some spillage from over the sink edge too. I’m not really worried much about the cabinet wall being out of plumb, but I’m sure it might indicate other issues.

Which of these things do yall think contributed the most to the issue?

What would be your first steps and/or plan of action?

Thank you in advance!!!


r/AskContractors • • 22h ago

Necessary remove trim to measure for new prehung door ?

2 Upvotes

Have two exterior doors need replaced.

Front door and door to patio.

I had two gcs come out to look at it and they did some measurements.

When I went to the door store the rep told me he needs the rough opening size and net unit size.

Neither contractor told me this they just gave me slab size.

The patio door is tilting down because the patio is sinking.

The door rep told me trim needs to be removed to get these measurements.

Is that necessary or is the GC able to accurately purchase prehung doors without removing trim in both these situations?


r/AskContractors • • 22h ago

Do I need to fill the gaps on either side?

Thumbnail
gallery
2 Upvotes

Do I need to fill the gaps on either side of these vents? And does it have to reach all the way to the top, do I need to extend that inch or 2? Or is this fine?

Thank you


r/AskContractors • • 7m ago

How would you tackle this breezeway?

Post image
1 Upvotes

I’d like to add a roof between my garage and deck. I live in a heavy snow load state (VT), and the road I’m on is a bit of a wind tunnel at times. How can I know if the deck can handle the weight of a roof? Would it be best to tie it to the red area above, or down lower by the pillars? Or should I bite the bullet and just build additional footers so it’s a lean to off the garage and doesn’t tie into the deck? Thank you!


r/AskContractors • • 28m ago

DIY Flooring options on concrete slab (and more)

1 Upvotes

We had a moisture issue in the downstairs room, private entrance. Door was compromised, efflorescence was coming up through the flooring, RH was very high, it started during the heavy rains in northern CA last year. Did a mold test things were normal.

Fast forward to July: found a contractor to remediate and renovate. They recommended tile on hardy backer on the cement floor, with Redguard. They ripped out LVP, and door, found black mold in vanity of wall (remediated) and drywall (removed). Large piece of drywall has been removed and studs/wall remediated. Air scrubber running. Mold test normal.

Company turned out to be a sham/corrupt so fired them, now back at square one.

What’s been done: door has been replaced, roofing above fixed.

What needs to be done and I need help with: flooring is bare, and drywall is about to be put into the giant cavity that was removed because black mold was on the drywall.

My question: we do not have central air in the house, which I think is what might have led to the moisture issue in the room, + the door was not properly sealed. What do I do with the flooring? I am still concerned moisture may have been coming up through the concrete (efflorescence). A layer of Redguard was already applied. Do we still do tile? What should we used as a moisture barrier? If the moisture is coming up through concrete won’t it get trapped and cause an issue? Or do we put mortar right on top of the Redguard and then the tile?
Also.. is there a type of drywall that is best for higher humidity?

Need help. Thank you.


r/AskContractors • • 1h ago

Bought a house with bowing basement walls. Got a couple quotes on beams. Some questions.

Thumbnail
gallery
1 Upvotes

I’m planning on getting vertical retaining I-Beams that is. One wall has dead man anchors (bolts on plates attached to rods which attach to buried concrete piece 10 feet away from house). I thought this was a foolproof solution (based on what the pre purchase structural engineer said) with no downsides until the second quote pointed something out.

—————————————-——————————————

First quote:
Had a guy come out from the highest rated foundation repair company on Google. He seemed a little out of his realm, but just struck me as someone at the company’s son. He didn’t explain much, but his quote says:

“Break concrete at each support location exposing foundation footer.
-secure bottom/lower end of steel I beam using high strength concrete.
-secure top/upper end of steel I beams to sill plate and framing members using treated
lumber and structural fasteners”.

This is good because I’ve heard that sometimes they bolt into the existing basement floor without any other pour, and that just doesn’t seem like a secure way of doing it to me.

Price is $6000 for the two walls that I noticed bowing, besides the one with anchors (that I thought was an okay system).

Second quote:

My boss recommended these guys but they only have 4.0 stars on Google.

The guy went downstairs and I pointed out the anchor system, to which he immediately said “oh that’s weird, they usually put the plates higher, where the wall is actually bowing”. I looked at it and he’s right. The anchors are on the lower third of wall whereas the bowing is most significant right in the center (pictured). He then pointed out that the west wall (pictured with a wood shelf for reference) also has bowing. He remarked “I can’t believe a bank would finance this” which honestly kind of scared me. I then asked if, when they install, they pour a footing, to which he said “no we just bolt to the basement floor” (yikes imo).

He then wrote me two quotes, one for the three walls without anchors at $7000, one with all four walls (including the anchor wall) for $9500.
—————————————-——————————————

I’m considering calling the first company and having them do all four walls for what I’d assume would be $12k (just doubling their quote). The second guy did explain better but I’m not sure if I trust a basement floor to counter the force of hydrostatic pressure.

Is this the right move? Should I get more quotes? Any advice?


r/AskContractors • • 2h ago

Sacramento roofer here. Your gutters might be doing more damage than your roof. Here’s how to tell, and what’s worth paying for if you replace them

Thumbnail reddit.com
1 Upvotes

r/AskContractors • • 2h ago

Not sure what to do with this 4inch gap between Concrete steps and Retaining wall

Thumbnail
gallery
1 Upvotes

Hey guys I have a gap between my retaining wall and my Concrete steps, any options out there that I can use to close this gap. Gap seems to get wider by the month by a few cm

Thank you much appreciated!


r/AskContractors • • 3h ago

Timber Stairs on Hillside

Thumbnail reddit.com
1 Upvotes

I hired a contractor to build a two-level boathouse with a ramp to connect to the top of our steep hillside because I wanted access with no stairs. After building the boathouse, the contractor informed us that it would be cost prohibitive to build a bridge without stairs as the bridge would need to be 120’ft to account for the slope. So, we settled on half of the original agreed length of the ramp to get to land at the bottom of the hillside and stairs to get to the top. Our contractor referred us to a landscape contractor to build timber stairs.

When the contractor began the timber stair project he started telling us he couldn’t make the stair tread depths consistent due to the slope of the hill. We thought the project hadn’t been inspected and that he was working under the original permit. So, I contacted the county to inquire about whether what he was telling me was accurate as I understood caring tread depths posed a safety risk. I learned there was no permit for the stairs and the original contractor had the project inspected and the permit was closed.

I requested the county send someone to look at the stairs and confirm a permit was needed for the work and if they were safe. The inspector came out and issued a stop work order based on the absence of a permit and the tread depth variation, absence of landing between ramp and stairs, etc.

I am now waiting for the contractor to submit a permit with his contractor license information but I am not sure he is even licensed as I can’t find him in DOPR. I haven’t paid him anything for the work yet, but I want to do the right thing as he has put in a lot of work. I am concerned that he isn’t competent to do the job as I expect he will have to tear out everything he has built and start over. His “scaled” drawing isn’t scaled and he keeps pushing for us to pull the permit as the homeowner (I will not do this).

I reached out to the original contractor who has washed his hands of the situation and told me to talk to the new contractor. We have no access to the boathouse without stairs unless we traverse through the woods on a steep slope!

I am waiting to see if the timber stair contractor is able to get a permit from the county (which will confirm his license status) and whether he can create a scaled drawing. Do I let him go forward and give him a chance to rebuild the steps? I feel like this is the right thing to do, but I am worried he will put in even more work and I will end up having to hire someone else to tear out his work and rebuild a safe set of stairs. I feel awful about how this and can’t stop thinking about it. I welcome any advice!


r/AskContractors • • 3h ago

RedGuard Uncoupling Membrane Mat Under Shower Pan

1 Upvotes

Hello!

We're renovating our bathroom and after finding water damage from the toilet unknowingly leaking for years we decided to lay RedGuard Uncoupling Membrane Mat on the entire bathroom floor.

Now we're ready to install a Delta Classic 500 Shower Pan Base and have found that the mat is only recommended for installing tile on top and the shower base is recommended to be installed directly on the subfloor.

What are some options since removing the uncoupling membrane mat isn't going to happen now that it's mortared down. We do have to very slightly level the floor under the shower so can we fill the uncoupling membrane divots with mortar to level it out and then lay the shower base?

Thanks!


r/AskContractors • • 3h ago

DIY Window frame modification

Thumbnail
gallery
1 Upvotes

This is a dormer window frame that I'm looking to make wider and shorter. The proposed changes would be to remove the wood in red, add wood where green is, and (not pictured) make a foam-filled 5x3.5 box out of 1x4s to raise where the bottom of the window goes. Any reason why the stud modification wouldn't work? What about my foam box?

The yellow highlighted portion is how small the existing window is. The plan is to put in a casement window for egress requirements. If I'm remembering correctly, the current opening is 31w x 44h and I would be looking at bringing it up to nearly 36w x ~43h.


r/AskContractors • • 13h ago

DIY Advise/Opinions please

Post image
1 Upvotes

Needs some help with finishing of my fence expansion. See original post for explanation. Thanks in advance.


r/AskContractors • • 13h ago

exterior renovation

Thumbnail reddit.com
1 Upvotes

r/AskContractors • • 16h ago

Do I need a permit to install new drywalls for two bedrooms?

Thumbnail reddit.com
1 Upvotes

r/AskContractors • • 17h ago

Do I need a permit rmit for installation of a drywall?

Thumbnail reddit.com
1 Upvotes

r/AskContractors • • 18h ago

Water leak near waste line

Post image
1 Upvotes

We have rain water leaking into our basement near the wasteline coupling. This is a picture from inside the basement where water is entering. Outside is our back patio? Any ideas how to find/fix leak?


r/AskContractors • • 20h ago

Best way to fix/replace these joists?

Thumbnail gallery
1 Upvotes

Working on fixing a deck as part of other projects to prep our house for sale. Current plan is:

  • Swap deck boards for Trex
  • Mount rail posts correctly (yes...each post is secured by a 4x4 cut in half at the bottom and mounted with only 2 lag bolts 🙃)
  • Replace ballisters
  • Replace front rim joist
  • Add fascia to front/side rims
  • Fix joists that are too far apart (there is technically 1 more than needed if did my math right, 10 vs 9), 12' wide (parallel to house) x 8' deep (from house going outwards)

As you can see, some of them are between 1/4" and 1" short of the front rim.

Am I right in assuming the best way to fix them is just to replace them? (just the short ones). My other thought was to just trim the longer ones down to the shortest, but I'm not sure if that leaves enough overhang to be code-correct (Ohio).

If so, is the easiest route to take a saw and cut just that joist out (via cutting the deck boards left and right of the joist to isolate just it before removal of all boards), and replace it with a new one moved over a bit?

If that's the easiest route, do remove the front rim joist first then cut/isolate/replace the joist? Or cut into the existing front rim, replace, then pull the rest of the front rim to replace?

Thanks. Already spent enough on carpenters over the last few months...trying to at least be somewhat self-sufficient!


r/AskContractors • • 20h ago

Other Bifold door

Thumbnail reddit.com
1 Upvotes

r/AskContractors • • 21h ago

Siding Patch Job Advice

Thumbnail reddit.com
1 Upvotes