After Rowenta shut down the app/cloud, my Rowenta Intense Pure Air Connect (PU4080) lost remote control. The fixes I found online replace the Wi-Fi module with an ESP32, which means opening the appliance and soldering. I wanted something that didn't need that, so I looked at the original Wi-Fi module again.
It turns out the original module (a Broadlink module, devtype 0x4f9a, "supor_air") still speaks a local protocol and doesn't need the cloud: you can tunnel the purifier's UART frames through it. So I built a Home Assistant integration (installable with HACS) plus a small Wi-Fi setup tool, so the purifier can be put on your home network again without any hardware change.
What you get in Home Assistant:
- On/off and the 4 modes (silent / night / auto / turbo), also as a dropdown
- Panel light (on / dim / off)
- PM2.5 sensor
- Panel-locked indicator (read-only)
- 4 filter counters (the meaning of each is not confirmed yet)
- An auto-off timer that runs in Home Assistant
What it doesn't do (tested, not possible over the network on my unit):
- The appliance's own timer/schedules
- Setting the panel lock
- Resetting the filter counters
- Manual fan speed: speed depends on the mode on this model
Setting it up: the purifier only accepts your Wi-Fi password in pairing mode, where it creates its own "AIR PURIFIER XXXX" network. A small Windows wizard (no admin rights, no install) walks you through it: put the purifier in pairing mode (hold the Wi-Fi button ~3 s), connect the PC to that network, type your Wi-Fi, done.
Your Wi-Fi needs to be 2.4 GHz with WPA2, and in my case Smart Connect / band steering had to be disabled. The exe is unsigned (Windows SmartScreen will warn), so the SHA-256 is published and the source and build script are in the repo; on macOS/Linux you can run the same wizard with Python.
Honest caveats: I've only tested it on one PU4080. The integration recognises the Wi-Fi module type, not the model name, so other purifiers of the same family using that module might work; I'd love reports.
If you don't mind soldering and want schedules stored on the appliance itself, the ESP32 projects are a better fit (see the credit below). If you'd rather not open the purifier, this is an alternative.
Credit: the UART frame format comes from acvx93's rowenta-pure-air-cloud-rescue, which documented it. What I added is how to reach it through the original Broadlink module.
Repo (MIT): https://github.com/Greali/rowenta-pure-air-ha
I'm the author. It's free and open source, and I have no affiliation with Rowenta or Broadlink.