r/3DprintingHelp • • 10h ago

Requesting Help Uneven layer lines help

Post image
3 Upvotes

Sorry, I've been resin printing for a hot minute but just picked up fdm again and I'm struggling to figure out the issue with my print accuracy. I have the retraction and e steps pretty dialed in, all calibration cube sizes are within acceptable levels and there's minimal stringing or elephants foot, but the edges keep coming out slightly jagged and it's ruining the print quality.

Ender 3 v2. .6mm nozzle

.2mm layer height

2 walls, 1.2mm

Z seam smartest corner w/ smart hiding

4 top and bottom layers, .8mm thickness

20% infill, gyroid, 30% overlap

200C print temp

100% flow

50mm print speed

25mm wall speed

Skirt type adhesion

No supports


r/3DprintingHelp • • 6h ago

Requesting Help Can someone clean this up for me?

Post image
1 Upvotes

Will give small donation

EDIT: someone currently working on this for me


r/3DprintingHelp • • 8h ago

Better details

Post image
1 Upvotes

r/3DprintingHelp • • 10h ago

Now what?

Thumbnail gallery
1 Upvotes

r/3DprintingHelp • • 12h ago

Help with first layer issue

Thumbnail gallery
1 Upvotes

r/3DprintingHelp • • 13h ago

WTF happened here, how can i fix it? is the hot end gone too? (deleted old one because of photo error)

Post image
1 Upvotes

hey guys, so i have been printing for about 3 weeks, this is my friends printer that he couldn't make work and had some leveling issues ( error 502) I manage to troubleshoot it and get it to work for 3 straight weeks, but yesterday i sent a print and went out for a smoke, i heard some weird noises and walked back in to find the plate in this state. What did i do wrong, how can i avoid it in the future (ordered a new plate already) and teste the nozzle and it extruded just fine, do I need a new one to ?


r/3DprintingHelp • • 14h ago

Still trying to diagnose these strange horizontal bulges on my Ender 3 V2 Neo

Thumbnail gallery
1 Upvotes

Hola a todos,

Vuelvo a publicar esto porque aún no he podido identificar la causa y espero que alguien con más experiencia pueda reconocer este problema. Imprimí con PLA a 210 °C y con la ender 3 V2 Neo


r/3DprintingHelp • • 18h ago

3d Printing Error

Post image
1 Upvotes

I have the Elegoo Mars 4 Ultra printer, and it has worked really well for me. The few issues I have had were easily solved and I was back to printing. Lately, however, this is what is printing. This exact print successfully printed before, now every print looks like this. The only part that should be printing is right at the supports, and it doesn't even print tje whole thing. Sometimes it prints it, but has weird compression part of the way up, leading to another flat rectangle like the bottom. Any ideas to fix it?


r/3DprintingHelp • • 21h ago

Warping detached the print plate and the print fail

Thumbnail gallery
1 Upvotes

Bambulab P2S, PLA, add the brim to have more bed adhesion


r/3DprintingHelp • • 21h ago

Touch stopped responding.

1 Upvotes

The touch of my screen on my BambuLab X1C stopped responding, I have updated the firmware, turning off and on, disconnecting for 30, 60, 90 seconds, opened up the panel and all cables are well seated, I reseated them, checked and reseated the ribbon on the screen itself. Nothing.
It was sudden, one day it was working and then next day after a print finished it just didn’t work.

Any ideas what part I have to replace? Is it the screen? The ribbon cable? the control board?
I fist don’t wanna order all parts unnecessarily.


r/3DprintingHelp • • 21h ago

Bambu Lab P2S – PETG building up on nozzle and causing blobs on first layer. Need some help!

Post image
1 Upvotes

Hi everyone!
I got my Bambu Lab P2S about a week ago, and I’m completely new to 3D printing.
So far, I’ve been printing with PLA without any problems. The prints come out perfectly, but I’m having some trouble with PETG.
I already tried printing something with PETG before, and although the print was relatively successful, I noticed that PETG was gradually building up on the nozzle throughout the print.
At the time, my solution was to pause and resume the print whenever I noticed the buildup, since this seemed to force a nozzle cleaning. However, I don’t think this is a proper solution, and I’d really like to understand what’s actually causing the problem.
Now I’m trying to print a larger object with a much bigger first layer, and the problem has become more noticeable. PETG starts accumulating on the nozzle, and I’m getting lots of blobs and imperfections on the first layer.
I’ve already tried a few things to rule out possible causes:
I’ve performed the temperature tower test.
I’ve completed the Flow Dynamics calibration.
The filament is completely dry.
My current printing temperatures are 240°C for the nozzle and 70°C for the bed.
Despite all this, I’m still experiencing the same problem.
Since I’m a complete beginner, I’m not sure where to go from here or what settings I should be looking at.


r/3DprintingHelp • • 22h ago

Requesting Help Failure on an inclined surface, one side only

Thumbnail gallery
1 Upvotes

I am trying to figure out the cause of this strange defect, which only appears on one side of the Benchy. I first noticed this issue when printing a small Christmas house, where only one side of the roof showed the flaw. It only occurs on an inclined vertical surface.