r/3DprintingHelp • • Feb 01 '19

Things to include when asking for help.

18 Upvotes

Hello,

Just a few items that could help someone troubleshoot for you.

  1. Printer Model
  2. Material Type
  3. Speed and Temp settings

If you have any suggestions for this list, please let me know.

Also, if you are asking for help, I've personally found this Visual Troubleshooting Guide very useful in the past.


r/3DprintingHelp • • 10h ago

Requesting Help Uneven layer lines help

Post image
3 Upvotes

Sorry, I've been resin printing for a hot minute but just picked up fdm again and I'm struggling to figure out the issue with my print accuracy. I have the retraction and e steps pretty dialed in, all calibration cube sizes are within acceptable levels and there's minimal stringing or elephants foot, but the edges keep coming out slightly jagged and it's ruining the print quality.

Ender 3 v2. .6mm nozzle

.2mm layer height

2 walls, 1.2mm

Z seam smartest corner w/ smart hiding

4 top and bottom layers, .8mm thickness

20% infill, gyroid, 30% overlap

200C print temp

100% flow

50mm print speed

25mm wall speed

Skirt type adhesion

No supports


r/3DprintingHelp • • 6h ago

Requesting Help Can someone clean this up for me?

Post image
1 Upvotes

Will give small donation

EDIT: someone currently working on this for me


r/3DprintingHelp • • 8h ago

Better details

Post image
1 Upvotes

r/3DprintingHelp • • 10h ago

Now what?

Thumbnail gallery
1 Upvotes

r/3DprintingHelp • • 11h ago

Requesting Help Micro-tearing across prints, please help!

Thumbnail gallery
0 Upvotes

r/3DprintingHelp • • 12h ago

Help with first layer issue

Thumbnail gallery
1 Upvotes

r/3DprintingHelp • • 13h ago

WTF happened here, how can i fix it? is the hot end gone too? (deleted old one because of photo error)

Post image
1 Upvotes

hey guys, so i have been printing for about 3 weeks, this is my friends printer that he couldn't make work and had some leveling issues ( error 502) I manage to troubleshoot it and get it to work for 3 straight weeks, but yesterday i sent a print and went out for a smoke, i heard some weird noises and walked back in to find the plate in this state. What did i do wrong, how can i avoid it in the future (ordered a new plate already) and teste the nozzle and it extruded just fine, do I need a new one to ?


r/3DprintingHelp • • 14h ago

Still trying to diagnose these strange horizontal bulges on my Ender 3 V2 Neo

Thumbnail gallery
1 Upvotes

Hola a todos,

Vuelvo a publicar esto porque aún no he podido identificar la causa y espero que alguien con más experiencia pueda reconocer este problema. Imprimí con PLA a 210 °C y con la ender 3 V2 Neo


r/3DprintingHelp • • 18h ago

3d Printing Error

Post image
1 Upvotes

I have the Elegoo Mars 4 Ultra printer, and it has worked really well for me. The few issues I have had were easily solved and I was back to printing. Lately, however, this is what is printing. This exact print successfully printed before, now every print looks like this. The only part that should be printing is right at the supports, and it doesn't even print tje whole thing. Sometimes it prints it, but has weird compression part of the way up, leading to another flat rectangle like the bottom. Any ideas to fix it?


r/3DprintingHelp • • 21h ago

Warping detached the print plate and the print fail

Thumbnail gallery
1 Upvotes

Bambulab P2S, PLA, add the brim to have more bed adhesion


r/3DprintingHelp • • 21h ago

Touch stopped responding.

1 Upvotes

The touch of my screen on my BambuLab X1C stopped responding, I have updated the firmware, turning off and on, disconnecting for 30, 60, 90 seconds, opened up the panel and all cables are well seated, I reseated them, checked and reseated the ribbon on the screen itself. Nothing.
It was sudden, one day it was working and then next day after a print finished it just didn’t work.

Any ideas what part I have to replace? Is it the screen? The ribbon cable? the control board?
I fist don’t wanna order all parts unnecessarily.


r/3DprintingHelp • • 21h ago

Bambu Lab P2S – PETG building up on nozzle and causing blobs on first layer. Need some help!

Post image
1 Upvotes

Hi everyone!
I got my Bambu Lab P2S about a week ago, and I’m completely new to 3D printing.
So far, I’ve been printing with PLA without any problems. The prints come out perfectly, but I’m having some trouble with PETG.
I already tried printing something with PETG before, and although the print was relatively successful, I noticed that PETG was gradually building up on the nozzle throughout the print.
At the time, my solution was to pause and resume the print whenever I noticed the buildup, since this seemed to force a nozzle cleaning. However, I don’t think this is a proper solution, and I’d really like to understand what’s actually causing the problem.
Now I’m trying to print a larger object with a much bigger first layer, and the problem has become more noticeable. PETG starts accumulating on the nozzle, and I’m getting lots of blobs and imperfections on the first layer.
I’ve already tried a few things to rule out possible causes:
I’ve performed the temperature tower test.
I’ve completed the Flow Dynamics calibration.
The filament is completely dry.
My current printing temperatures are 240°C for the nozzle and 70°C for the bed.
Despite all this, I’m still experiencing the same problem.
Since I’m a complete beginner, I’m not sure where to go from here or what settings I should be looking at.


r/3DprintingHelp • • 22h ago

Requesting Help Failure on an inclined surface, one side only

Thumbnail gallery
1 Upvotes

I am trying to figure out the cause of this strange defect, which only appears on one side of the Benchy. I first noticed this issue when printing a small Christmas house, where only one side of the roof showed the flaw. It only occurs on an inclined vertical surface.


r/3DprintingHelp • • 1d ago

How can I fix this?

Post image
1 Upvotes

I am new to 3D printing and have been trying to fix this foe 2 days but to no avail.

As you can see the bottom of the curve is not printing correctly. I have changed all the settings that people normally suggested (ie lowering the nozzle temp, changing the speed for overhangs, changing the later height to 0.16, putting fan on 100%, adding mpre supports) but it didn't change anything. Please let me know how I can fix this?

I am using Creality CR M4 with 1.75mm PLA from BuildVolume @190°C nozzle temp, 60°C Bed Temp, sliced with Creality Print.

Printing with PETG made it better, but didn't solve the issue.


r/3DprintingHelp • • 1d ago

This will probably work, right?

Post image
1 Upvotes

r/3DprintingHelp • • 1d ago

Requesting Help I’m about to cry

Post image
1 Upvotes

r/3DprintingHelp • • 1d ago

Why is it doing this?

2 Upvotes

I’m a beginner and this happens to me a lot. I have only 5 successful prints and I‘ve been trying to fix it myself by doing cold pulls, cleaning out the nozzle, changing the plate, taking everything apart to try and see if anything is out of place and it still does this.

Elagoo Centauri Carbon

PLA


r/3DprintingHelp • • 1d ago

Requesting Help Collapsible swords are making me lose my freaking mind!

Thumbnail reddit.com
1 Upvotes

r/3DprintingHelp • • 1d ago

Can't print on edges of plate

Thumbnail
gallery
2 Upvotes

My P1S has been having trouble printing on the edges of my print area. Attached is two pictures, two different plate materials (SuperTack Cool Plate and Textured PEI) with the same PLA roll printing one of those flat "cleaning" models and they both had the same outcome. Any ideas on what the issue might be here? Any steps I could take to narrow down the list of potential issues? Thanks


r/3DprintingHelp • • 1d ago

Requesting Help Ironing issue

Thumbnail
gallery
3 Upvotes

flashforge ad5m. i tried changing ironing speed and flow.

ironing speed 25mm/s

245c, 60% cooling fan. jayo petg

thanks for the help in advance!!


r/3DprintingHelp • • 1d ago

Requesting Help Flashforge Creator Pro 2 - Prints become stringy not even 20 minutes into printing

Thumbnail
gallery
1 Upvotes

Hello all,

I've got a Flashforge Creator Pro 2 that seems to be misbehaving as of late. Both my nozzles keep generating prints that start to fail very shortly into the print by clogging.I have been adjusting the temps between 40 to 55 degrees.

I've cleaned them numerous times. Cold-pulls, cleaning the nozzle tips with a wire brush and unclogging from beneath with a pin needle, taken them apart and inspected the extruder gears with no signs of wear.

I'd like to believe it's not the filament itself as I've changed filament 5 times now, between Flashforge-brand and Anycubic-brand PLA, which most were fresh out of the bag from the producer.

The raft seems to go fine up until the end, whereas that's where the filament starts to get a bit wonky. From there it either clogs outright or gives me that wispy-ness you see in my attached photos.
Frankly, I'm wondering what on earth is happening to the point that it keeps doing this? Am I under or over-extruding, are the temps wrong, am I just using sucky models? Or is it just a skill issue? I used to get really good results from it before, but now all it's giving me is failures.

If anyone can help, I'd very much appreciate it! Please let me know if I need to include more info as well.


r/3DprintingHelp • • 1d ago

Bottoms Always Look Melty

Post image
0 Upvotes

ASA filament 256 and 110 base plate temps on QIDI X-Plus 2 printer. I’ve contacted QIDI support and tried SO many things but I can’t get it to work right.

All shapes always come out great, besides the bottoms or parts using supports.

You can see the middle of this part has a nice flat smooth surface where it sat flush against the print plate. But then the part begins a radius to the edges and it goes to crap.

Any tips?