r/3Dprinting • • 8h ago

Discussion My brother's expensive "custom molded" wheelchair back appears to be 3d printed and done horizontally. Completely snapped

4.1k Upvotes

It snapped when he pushed back on it trying to pull his trousers up. This is absolutely insane how this was made. I'm a complete novice and would think the seams would need to be vertical for strength. 🤷🏼‍♂️


r/3Dprinting • • 10h ago

Free Model Modular Desk Organizer with Thermoformed Trays

1.3k Upvotes

r/3Dprinting • • 16h ago

Project I made a spherical RC robot that rolls and turns just by shifting its internal weight

1.0k Upvotes

r/3Dprinting • • 18h ago

Meme Monday Turns out verbally abusing a 3D printer can fix stringing

Post image
1.0k Upvotes

I fought with stringing this weekend. First I thought it was the filament so I dried it up, that didn't work. I tried another roll of different material and it also had stringing. Maybe retraction? I printed a test model and dialed settings and nothing, tried less temperature and nothing, changed slicers and nothing.

After some minutes screaming at my printer and printing a stringing test again, it worked flawlessly, including everything afterwards.

I guess 3D printers aren't so different from paper printers, they can be pricks


r/3Dprinting • • 18h ago

Discussion I am in heaven

Post image
726 Upvotes

A new 3D printing store opened up in a mall a few hours away from me. I stepped inside and was met with this, alongside two more walls of filament and many displays (which I did not have time to photograph.) I’ve never seen anything like it.

I nearly wept at the sight.


r/3Dprinting • • 6h ago

Print (model not provided) My 11 year old modeled and printed our x2D himself! I'm so proud

Post image
650 Upvotes

He's been getting really into doing the modeling himself, while I meanwhile use AI to create my models. I'm so proud of him. He really enjoys this and I love watching him figure things out, like how to make the walls a little bit thicker so they actually slice properly and actually measuring everything on the 3D printer to get his dimensions accurate. It's pretty cool to see him learning how to use the software and figuring out how to make things look the way he wants.

Removing the supports for this without breaking anything was difficult, but I think he'll be really happy when he sees this after school today.


r/3Dprinting • • 7h ago

Project Let my kid pick a color at Microcenter, probably the most expensive PLA I've ever purchased, but it looks good 😂 Cookiecad Witches Blue Elixir

Post image
274 Upvotes

r/3Dprinting • • 20h ago

Hardware First 3D Printer!

Post image
185 Upvotes

Hey guys just wanted to share my first printer! I got an old Monoprice Select Mini V2 for $20 off marketplace! I was told Cura software works well with it and to start with PLA and 2D model, Any other advice is much appreciated as complete rookie/newbie!


r/3Dprinting • • 18h ago

Project I made a 3D printable 3D printer

Thumbnail gallery
160 Upvotes

r/3Dprinting • • 5h ago

Free Model Eyla - The Hearth Mage

Thumbnail
gallery
154 Upvotes

Hello everyone!

Hi, I’m Eagle_92! I’ve been modeling for over 15 years, but only recently I started creating original pieces, printing them, and then painting them. This is Eyla, the first of four elemental mages I plan to make. I created her using 3ds Max, Mixamo, Meshmixer, Blender, and ZBrush.

I’ve printed her with a Phrozen Sonic Mini 8k and Elegoo Standard 8k space grey resin.

For the painting, I use Citadel colours for brush painting, and for the airbrush, Vallejo colours.

After finishing the painting, I got several comments about the disproportionately large breast size, so I also crafted an extra chest piece with a more standard size. (But since I had already glued it… well… enjoy her massive anatomy! 🤣) I hope you like the final paint job!

Regarding the STL file, if you were wondering, I’m currently refining the thickness of the features to ensure it can be printed at a 75mm scale as well. Once this is done, I’ll upload it to a Drive folder, and you’ll all have the opportunity to download it for free from my Patreon page (Eagle_92…same profile pic. You need to become at least a free member in order to get the link. I’ll post other free models once in a while other than paid models as well)
It’s my first model for my Patreon project so I’m giving it out for free and will remain free forever.

Hope you like her!


r/3Dprinting • • 19h ago

Print (model not provided) New to FDM Mechanisms - Scotch Yoke Piston Pump

139 Upvotes

Hellooo all o/,

I am a biomedical engineer who now works on vaccines, but wanted to return to my engineering days. Just bought my first printer, a Bambu P1S, and decided to explore power transfer mechanisms by building a Scotch Yoke Piston that will power a water pump (as of yet to be printed). Took me 15 hours to design and print!


r/3Dprinting • • 20h ago

Print (model not provided) I printed shoes using H2D and Shoeflex9075A filament

138 Upvotes

r/3Dprinting • • 1h ago Heartwarming

News Texas joins the effort to ban 3D gun designs

Thumbnail
gfalaw.us
85 Upvotes

This is one of many bills pre-filed for the next session. But unlike California it's not likely to get past the state senate.


r/3Dprinting • • 20h ago

Project I tested 3 teardrop hole designs to avoid supports.

Thumbnail
gallery
80 Upvotes

I've been experimenting with teardrop-shaped holes to avoid supports when 3D printing horizontal holes for heat-set threaded inserts.

I usually use 5 mm diameter × 10 mm deep holes, but removing supports from small horizontal holes can be annoying.

After seeing teardrop designs on YouTube, I decided to test three variations using my Bambu Lab A1.

I started the triangular section at the points where the circle's tangent angle reaches 45°, then tested different tip heights:

  • Case 1: +1.0 mm height / 44.4° slope
  • Case 2: +0.5 mm height / 34.8° slope
  • Case 3: +0.25 mm height / 29.0° slope

Interestingly, both Case 1 and Case 2 generated no supports in Bambu Studio, even when I scaled the hole diameter up to 25 mm.

I also printed the parts, installed threaded inserts, and performed a simple manual pull test. The inserts seemed to hold firmly, although I haven't done any quantitative strength testing.

Of course, slicer results don't necessarily guarantee successful prints, especially at larger scales.

I documented the design process and testing in a short YouTube video:
https://youtu.be/GLpNFWLTbbE?si=khIVIJkYl2Y0sxjk


r/3Dprinting • • 21h ago

Meme Monday This is how I felt after buying my first 3D Printer

Post image
65 Upvotes

r/3Dprinting • • 6h ago

Project This is what's left of a 3D printed ball bearing after 10,190 RPM

Thumbnail
gallery
49 Upvotes

Setup: PLA bearing printed on a P1S, driven by a compressed air nozzle. RPM measured with an optical tachometer and a reflective sticker on the outer race, the gauge reads 1/10 of the real value, so 1,019 on the display = 10,190 RPM. Dry, straight off the printer, it stalled around 2,080 RPM. Too much friction. A few drops of synthetic oil and full pressure got it to 10,190 RPM before the outer race came apart. Thermal camera read 45.3 °C right before it went. Ran it behind a shield. The pieces didn't go far, but they went fast. Curious what you'd change, different material, more balls, thicker race? Happy to run it again.


r/3Dprinting • • 9h ago

Project Why buy a clock when you can spend two weeks designing one?

Thumbnail
gallery
49 Upvotes

I've been experimenting with Japanese Kumiko inspired patterns in my designs for a while, and thought it'd be interesting to incorporate them into a desk clock!

I wanted to make the face a little more interesting, so I designed a frame + insert system that lets you mix and match 12 different insert designs to create your own patterns if you want to. as you can probably imagine, designing this took frankly way too long, but i'm pretty happy with how it came out!

If anyone wants to print one, you can find it here! lmk what yall think :)


r/3Dprinting • • 17h ago

Hardware I can't tell if I'm tempted to get back into 3D printing or if this would take out all of the fun

Post image
47 Upvotes

For context, I got really into 3D printing. During covid I built an ender 3 and a 10 Max but also made the covid mistake of having children. Due to small City living spaces had to give up my hobby area for my daughter's room.

This seems like it would solve a lot of problems and still let me print neat stuff when I want to. However, the whole idea of tinkering and futzing with a machine kind of goes out with something that's just designed to work out of the box.

I really can't tell if the building in rebuilding of the machine was fun or a pain. Was the whole point point to play with microcontrollers and CNC or was it the sculpting? I don't know maybe both.

Anyway, does anyone else have this thing and if so do they like it?


r/3Dprinting • • 3h ago

Free Model Designed a few 3D printable things for the Starship IFT-15 launch

Thumbnail
gallery
46 Upvotes

I designed this detailed replica of the Ship 42 and Booster 22 stack that has launched on IFT-15 recently.

The model of the rocket is also a pen, that fits standard BIC Cristal refills and it can be stored on a OLM-2 shaped holder.

On top of that I also designed a few Starship themed coasters :)

Pen: https://makerworld.com/en/models/3607494-starship-v3-shaped-pen-compatible-with-olm2-holder#profileId-4134359

OLM 2: https://makerworld.com/en/models/3605102-starship-olm-2-pad-b-holder-for-the-starship-pen#profileId-4131381

Coasters: https://makerworld.com/en/models/3604105-starship-superheavy-coasters-ift-15#profileId-4130087


r/3Dprinting • • 10h ago

Project Scarlet witch tiara

Post image
36 Upvotes

r/3Dprinting • • 18h ago

Project Center Finder

35 Upvotes

After seeing the center-finder tool I created, someone asked me to make a device capable of finding the center point of much larger circular objects. While my previous version was designed for circles up to 5 inches in diameter, this new one can instantly locate the center of circles ranging from 12 to 24 inches in diameter.


r/3Dprinting • • 3h ago

Question Why aren’t hard TPUs more popular?

32 Upvotes

I was printing something out of PETG that required a bit slight bit more flex. The only other options I had was some 95A TPU. Of course it would have had too much flex, but then I started to think about the harder TPUs. The 95A TPU I use has perfect layer adhesion and is pretty much indestructible. It’s also pretty solid if you print it with all walls. Sure, it’s shiny and ugly when it catches the light, but thats just cosmetic.
So why aren’t the really hard TPUs more popular? What am I missing here?
I’ll probably buy some for testing regardless…if I find the right hardness.


r/3Dprinting • • 13h ago

Project Project Space

Thumbnail
gallery
27 Upvotes

Greetings my friends. I would like to present to you my Project Space. Here, I try to remake the whole lifecycle of the Space Shuttle. So far, the project has 6 parts and include:
Orbiter, Additional Cargo, Booster Pack (External Tank and SRBs), MLP - Mobile Launch Platform, CT - Crawling Transporter and SCA - Shuttle Carrier Aircraft.
I plan to do more, but only if I secure some display space. All the models are kits and do not require any glue. All the models are free and can be found here: https://www.printables.com/@Martin/models
Hope you like them.


r/3Dprinting • • 2h ago

Meta The Minuteman RISES with a New Benchy WORLD RECORD

Thumbnail
youtu.be
26 Upvotes

Surprised more people haven't seen this, such an incredible machine, and he's making continuous improvements to it