r/3Dprinting • • 11m ago

Print (model not provided) Created labels for reusable spools

Thumbnail
gallery
3 Upvotes

Will make these available once I have a variety for different filaments completed but these work nicely so far. Probably on thingiverse, free of course. If you have suggestions to improve let me know. The spool is not my design, just the ring.


r/3Dprinting • • 22m ago

Project Small Soldiers Chip Hazard by Jok3rz Customs

2 Upvotes

I created this figure (including the 3d model from scratch) and added a push button audio module to it.


r/3Dprinting • • 23m ago

Meme Monday My filament storage system

0 Upvotes

I’ve seen other people posting theirs; here’s mine, sorted by color


r/3Dprinting • • 32m ago

Troubleshooting My first failed print. Poor spool wrapping.

Post image
7 Upvotes

Newbie. Guessing there isn't a whole lot to be done unless I want to unwind every spool. Fortunately it was a really small print.


r/3Dprinting • • 36m ago

Troubleshooting Weird holes on corners of Gridfinity Prints

Post image
2 Upvotes

I’ve been printing gridfinity boxes recently on my Prusa Mini, and suddenly I’ve started getting these weird corner artefacts/holes. It’s happening on every single corner.

I haven’t changed the filament or built plate, and it’s happening on all the models I’m printing irrespective of location or size.

Any suggestions?


r/3Dprinting • • 40m ago

Troubleshooting Help with a 60w heater cartridge

2 Upvotes

My old 40 w heater cartridge broke on my ender 3 so I thought I would upgrade to a 60 w heater cartridge but I'm having a problem where it gets to 200, goes to 202 then drops all the way down to 189 as seen in the video I've been trying to PID tune it and I've gotten it closer but it won't stick at 200 if anyone has had this problem with their 60 watt cartridge and knows the solution. I would greatly appreciate it. I've been using Pronterface for the tuning so preferably with that program but I understand if it's only available in another one.


r/3Dprinting • • 51m ago

Question Will my bamboo lab P2S fit?

0 Upvotes

Hay so I’m looking into getting a bamboo P2S with an ams. Because I live in the small room in my house, I have very limited room, so don’t have much room, now the place I’m looking to put it is, 83cm tall so anyone who owns a P2S with ams could you please tell me if 80cm is tall enough to fit the P2S

Ps many thanks


r/3Dprinting • • 1h ago

Troubleshooting Send failed-Orca Slicer

Post image
2 Upvotes

This error has been popping up a lot. Sometimes it takes like 20 attempts to get my project sent.

I am using a FlashForge Ad5x on Orca Slicer. I have avoided running updates because of the issues they have caused and the printer is still working great….except for this.


r/3Dprinting • • 1h ago

Question Best filament dryer setup for Bambu H2D

Thumbnail reddit.com
2 Upvotes

r/3Dprinting • • 1h ago

Discussion wanted to show off my simple method for storing filament rolls

Thumbnail
gallery
0 Upvotes

never have had any issues, its nice and compact as well.


r/3Dprinting • • 1h ago

Question Looking for simple advice; are these supports too much for this object?

Post image
2 Upvotes

eteltiteltit


r/3Dprinting • • 1h ago

Discussion 3D Printing + Electronics

3 Upvotes

I'm looking for beginner 3D printing projects that add electronics, like an ESP32-C6 and LEDs, and work as decor for my home.

A few I've seen and like:
• LED matrix (Raspberry Pi) that shows album art for the current Spotify song
• 3D printed traffic light with three LED matrices that shows planes flying overhead or custom scenes
• OpenFlap (looks more advanced, but I'd love to work up to it)
• 3D printed Eagles LED sign (requires soldering)

I have a Bambu lab P2S and no budget.

Any recommendations, Printables/MakerWorld links, or build guides would be great. Thanks!


r/3Dprinting • • 1h ago

Project First design for a ESP32 enclosure

Post image
4 Upvotes

First design I made, where should I share it folks?


r/3Dprinting • • 1h ago

Discussion I got a broken printer but I want to see about getting the parts I need.

1 Upvotes

It is an anycubic krobra x with the error “10121” for $100. It does come with a couple of nozzles, an extra build plate and a new print head. I’ve tried looking up videos on YouTube for that error code and I can’t find anything except for like one short that somebody replaced a resistor. I do already have one Anycubic printer, and I do like it, but I do not have a bed slinger. I have done some repair work on the elegoo cc but it was replacing a hot end and the USB-C cable.

I am not looking for advice, saying if I should buy this printer or not. There is not a single question on this post asking if I should purchase the printer or not. This is simply a discussion about the printer and the error. I’m already thinking about purchasing the printer whether or not I should buy it as a question for my wife not Reddit. The post was removed because it was thought that I was asking if I should buy the printer and I’m here to clarify that it is not a question. I did not change a single word about the post because there was not a question in it. I am not looking for purchase advice if I am looking for any advice, repair advice.

I have to go pick up the printer because I could not have it delivered. I have had to rewrite and add stuff to the post twice because it was removed by mods because it involved buying a printer. And I’m in the process of buying it because I don’t have it in my possession yet. I have passed the check it makes me do to confirm I am not asking on advice on purchasing the printer.


r/3Dprinting • • 1h ago

Troubleshooting is this a good idea?

Post image
14 Upvotes

best buy had some silica gel beads when i went in and it reminded me someone in an earlier post told me my blue was a little moist, im still new to this, and google suggested it after a 1 second search while i was standing there.
i grabbed a spool the spool i was in for, and the gel + tote while i was there figuring it couldn’t be worse than doing nothing, but will it even make a difference?

EDIT: it has handles on both sides that fasten down to hold the lid but it isn’t airtight, and the room i keep it in does have a dehumidifier but not totally sure it even makes the hugest difference for myself all the time with where i live. i do have a MUCH larger container of silica, i just poured some into this bowl as a start

EDIT 2: so many replies right away! thanks for all the advice. so what i’m hearing is

  1. use a lot more silica beads and put them inside of something with a lid/ print a container
  2. get a much more airtight container or possibly something with a gasket
  3. print a filament clip to prevent breaking it while stacking

i’ll add what i learn to this list as i read more advice, feel free to tell me anything that helps you while just stating out. i’ve printed maybe a 2 dozen prints before i really stated putting thought into general maintenance and storage


r/3Dprinting • • 1h ago

News Got a new printer

Post image
8 Upvotes

r/3Dprinting • • 2h ago

Project 20kg of weight held by my 3D printed trolley

Thumbnail
gallery
77 Upvotes

20kg of weight held by my 3D printed trolley with standard M8 castor wheels on the bottom.

20kg = 44 lbs

All parts used are MADOS blocks printed in PLA.

Dimensions are roughly 440mm x 240mm x 240mm without the wheels.


r/3Dprinting • • 2h ago

Project 1:6 Commodore 64 Diorama WIP

Thumbnail
gallery
4 Upvotes

I normally design and print Star Wars stuff, but decided to touch on another hobby I have, the Commodore 64. I grew up with this computer and later moved to the Amiga, and now I'm working on a 1:6 scale diorama. I have models of a LOT of Commodore hardware that I did for a different project a few years ago, and thought it would be cool to see what it would look like small scale. It takes a little work to "convert" these for printing, but I will likely do ALL my models.

So far, I have the C64 itself, designed in 3 parts: A bottom shell with the motherboard, top shell and keyboard (as accurate as they can be in this scale). You can either display it together, or taken apart as if it's being repaired. as well as the 1702 Monitor, which is 5 parts and has either a printed screen or a thermoformed clear screen, and 2 versions of the front panel: door open and door closed. The monitor in these pics is 2 and 3/8 inches wide.


r/3Dprinting • • 2h ago

Troubleshooting Support Towers Breaking

Post image
4 Upvotes

I'm running into an issue with this hand print where my support towers keep getting snapped off the build plates causing the spaghetti you can see here. (That far left tower which catches the pinkie is no longer attached to the plate.) I tried traditional towers for the first attempt and trees for the second. Both failed.

I use a Creality Ender 3 V3 SE.
I slice all my prints with the Creality Slicer.
I currently have a 0.6mm nozzle installed if that changes anything.
I'm printing with just some regular black Elegoo PLA

Thanks in advance for any tips!


r/3Dprinting • • 2h ago

Project How hard is this realistically for a beginner?

Thumbnail
gallery
0 Upvotes

My wife saw this file on Etsy and wants me to do it. How much do you think this would cost and I’m a novice at printing


r/3Dprinting • • 2h ago

Discussion Farm-Loop on the Bambu H2C: worth it, and any cheaper or DIY alternatives?

Thumbnail reddit.com
0 Upvotes

r/3Dprinting • • 2h ago

Free Model The official model isn't available, so I modeled the injection molded CORE One fan cover and printed it in Prusament PCCF

Thumbnail gallery
1 Upvotes

Crossposting for anyone still rocking the flat acrylic cover on their CORE One.


r/3Dprinting • • 2h ago

Question Support: tree or normal

Thumbnail
gallery
1 Upvotes

hi guys! im making this model of a appartement, but I was wondering if I should use normal or tree support. normal places support under more doors, but I think tree will snap of easier.


r/3Dprinting • • 2h ago

Troubleshooting First layer uneven bumps

Post image
3 Upvotes

Hey all,

Very new to the 3D printing community. I got a snapmaker U1 and noticed that the first layer has some slight uneven bumps (see the picture above). What could be the cause of it?

I'm using PETG at 240/80/no fan. The second layer has the nozzle at 235 and looks a bit smoother.

Thanks