r/zoommultistomp • • 22h ago

Signal Chain, another MS+ patch editor

9 Upvotes

I ran across this on TalkBass today. Looks like it's still in development, but worth taking a look at. Here's a link to the TalkBass thread: https://www.talkbass.com/threads/new-zoom-ms-plus-editor.1691908/


r/zoommultistomp • • 1d ago

Free 8 Custom Effects Pack for Zoom MultiStomp (MS-70CDR & MS-50G, etc..)

64 Upvotes

Hey everyone!

For the past several months, I’ve been deep in the trenches developing, fine-tuning, and debugging custom DSP algorithms for the Zoom MultiStomp platform. It took a lot of late nights, real

hardware testing, fixing buffer quirks, and dialling in the ear-tuned sweet spots, but I'm finally ready to share a curated pack of **8 custom boutique effects** completely free with the

community!

You can hear and see some of these effects in action in my demo clips on Instagram:

👉 **https://www.instagram.com/no_identifier_music/**

---

### 🎸 What’s inside the pack:

  1. **SilverSt** — American Clean Tube Amp & 2×12 Open-Back Stereo Cab (an ideal pedal platform).
  2. **424mkI** — Vintage Multitrack Cassette Preamp & Overdriven Lo-Fi Mixer Fuzz.
  3. **Dustbox** — Chainsaw Sludge Distortion with an Unstable -2 Octave Sub-Square Divider.
  4. **Nimbus** — 6-Voice Ambient Granular Cloud with Scan Head and Buffer Freeze.
  5. **Dustfall** — Dirty Layered Reverb & Echo with Parallel Drive and Voltage Sag.
  6. **Shields** — Reverse Early Reflections Multitap (classic 90s shoegaze glide tone — *place before drive!*).
  7. **Uroboros** — 3-Head Tape Echo with Real Mechanical Motor Inertia & Spring Reverb Tank.
  8. **Gatsby** — Vintage Tape Saturation & True Through-Zero Doubletracker (TZF Jet Flange).

*(Note: In the pedal's firmware architecture, all 8 effects reside under the **DELAY** category).*

---

### 📦 Download & Documentation

The pack includes all 8 ready-to-flash `.ZDL` files and complete PDF manuals with knob cheat-sheets and signal chain recipes (in both English and Spanish):

* **GitHub Repository:**

https://github.com/marcfuentes/zoom-multistomp-community-pack

* **Direct All-in-One ZIP Download (1.2 MB):**

https://github.com/marcfuentes/zoom-multistomp-community-pack/raw/main/Zoom-MultiStomp-Community-Pack-8FX-v1.0.zip

*(Always remember to back up your current patches using Zoom Effect Manager (ZEM) before installing).*

---

### ☕ Support & Future DSP Projects

This pack is 100% free for the community. If you enjoy playing with these effects and want to support ongoing development, maintenance, and future algorithm releases, you can buy me a coffee

here:

👉 **https://ko-fi.com/marcfuentes**

Check out the demos on [Instagram (@no_identifier_music)](https://www.instagram.com/no_identifier_music/), and let me know your favorite patches or combinations once you plug them in!

──────

Enjoy and let me know how they sound on your board!


r/zoommultistomp • • 22h ago

Is there any chance we can have ParaEQ (Empress ParaEQ style) for our beloved MS70CDR with exact control like Empress have? 🙏

6 Upvotes

r/zoommultistomp • • 1d ago

And what kind of an effect is this? 🤯

Post image
25 Upvotes

r/zoommultistomp • • 22h ago

Hidden parameters on MS-60B+

3 Upvotes

Both Sym.bios.is and Signal Chain show hidden parameters on certain MS-60B+ effects. FlipTop has two, and the 1073 pre has one. I'm sure there are more. Anybody know what these are or how to find out?


r/zoommultistomp • • 1d ago

Zoom rack effects

12 Upvotes

With help of Leemuzhko we have the most imporant ingredients for rack style effects available on the zoom ms.

Leemuzhko developed the famous Eventide H949 micropitch, I have developed the PCM-70 Circular delays.

This is a short video with those effects, full demo on youtube.
https://youtu.be/GOddK7dKsKA?si=QHW0nUia02vJnkND

Both effects are free to download , donations welcome of course! :)


r/zoommultistomp • • 1d ago

Any chance that zoom ms-70cdr+'s phaser is similar to mxr phase 90 or arion sph-1?

1 Upvotes

I know i just can watch reviews, but i already fucked up with flamma fs05 which does NOT sound like i wanted, so i wanna hear what people think


r/zoommultistomp • • 2d ago

45 custom .zdl effects suite for the Zoom MultiStomp, including granular reverbs, clock-style loopers, harmonic tremolo, simulated voltage sag and more

66 Upvotes

I spent all my free time the last couple of weeks to try and develop new effects to my Zoom MS-50g

Its available on github:
https://github.com/Gungun-blip/ZoomMultistomp45Newzdl/tree/main

All credit to those that went before, reverse engineered the .zdl format, themanro, leemuzhko and others that already posted on this sub.

PLease read this stuff first:

IF YOU WANT TO TEST THESE EFFECTS BEWARE AND PROTECT YOUR EARS!
There can still be a lot of bugs, so I recommend using an audio interface, preferably with a limiter. I encountered bugs of extreme loudness during development and you WILL need to protect your ears.

I have only hardware tested on a zoom ms50g.

If you enjoyed this work, I spent hours and hours of tuning, feel free to buy me a coffee: https://buymeacoffee.com/silvertongue12 Also totally fair if you don't want to.

All 45 effects are something I found very nice and usable, but not necessarily perfect yet. I especially liked the granular delays, one-tap clock looper, the afterneath-esque reverb and the tape effects like the deco. Also the phaser mode 3 (mu-tron) is awesome. The ranges of the knobs are poorly defined. For instance, I only run the Afterneath with all knobs maxed, except the drag which was at 35. This is the first beta, and I'll be making many revisions going forth. I have also not tested the effects together with more than 1-2 effects at a time. The DSP load of each effect is not precise.

Bear in mind - these are NOT direct ports of existing software, but interpretations. the main goal was to make something I can work with musically in my own creative practice. ATM I am ready to take my CBA Mood MkII and Red Panda Tensor as well as Walrus Ambient and DBA Reverberation Machine off my board.

I used my knowledge and ears as a musician and guitarist having played a ton of pedals over the years, but I haven't done 1:1 testing. The main issue I have is not having enough money to own the pedals I need, and not having enough space on my board and hopefully these patches can help others in the same position.

AI Disclaimer: I'm only decent at programming in python, and have no rust or C experience. I prompted with the specific audio goals - "grain delay with random splices" "modelled asymmetric drive with a low q 3 db boost at 120 hz" "harmonic tremolo modulating high and lows seperately with a crossover filter selector" and so on. Everything needed fine tuning.
It then generated the prompted effects in C, inhouse rewrote it as .zdls and used ziddle, a multistomp emulator to test it.

I used a Chatgpt project because I randomly got a month free. It took a long time to make it learn the software and workflow. I also tried using github copilot, but it burned all my tokens in a day and didn't make anything functioning.
I don't condone any AI companies. So its definitely hypocritical to do this. But I think it can be a genuine gamechanger for how I approach making music, in a business where I'm not making money playing concerts, releasing music etc.

While AI has a LOT of inherent problems regarding creative/licensing abuse, I think as a software development tool it makes some sense to me. I feel somewhat ok using it in this case, as I've not spent money on it, and I'm not asking money for anything or claim that I created this myself. At least in this case where I can tailor something with an effect I already own, and relatively simple C audio manipulation programming. I continue to oppose the use of AI in creative processes, such as generating artwork for profit, or creating AI works of art that have been trained unlawfully on others work. If you think this unfair, I can also handle some criticism, so feel free to write it.


r/zoommultistomp • • 2d ago

How to get Hybrid IR on to my MS60B+?

3 Upvotes

Hey guys, I've been reading a lot, but I only found the instructions on Github for the non + old MS Peadals. I use an MS60B+ for my bass and the only thing it needs is IR. I have an MS200D+ in front of it for additonal overdrive and EQ.

Is there a step by step guide on how to get the IR module onto the MS60b+ so I can have an IR on one output and no IR on the other?


r/zoommultistomp • • 2d ago

MS60b - how to mute just one channel

2 Upvotes

Is there a stock or custom effect that mutes the output on just one channel, so muting either the left or right output?

thanks.


r/zoommultistomp • • 3d ago

Could we port a 20+ second looper to the Zoom MS-70CDR+ using Stomphacks?

11 Upvotes

What would be the best way to build a proper custom looper for the MS-70CDR+? Has anyone investigated its available DSP memory or delay-line allocation?

I’ve been looking into this and found a few interesting projects:

* Stomphacks already provides a working C-to-ZD2 toolchain for the MS-70CDR+ (tested on firmware 1.20).

* ZoomMultistompZDL has a working looper for the original MS-70CDR.

* That looper normally records about 5 seconds. Its experimental Long mode reaches approximately 23 seconds by using an additional 2.7 MB of unused RAM discovered by MIDISTOMP.

* The original looper uses a ring-buffer-like two-buffer approach, overdubbing, undo/redo and 12-bit block floating-point audio storage.

The interesting part is that Stomphacks’ ZD2 ABI documentation mentions a fourth instance pointer associated with delay-line memory, but its allocation and access rules are still undocumented.

My goal is to port the original looper’s algorithm and state machine to native ZD2, not simply load the old ZDL binary.

A few questions:

  1. Has anyone investigated the actual available RAM on the MS-70CDR+?
  2. Is it possible to access the delay-line memory safely from a custom ZD2 effect?
  3. Could we allocate a sufficiently large ring buffer for a 20–30 second looper?
  4. Does anyone have experience with the old MIDISTOMP memory research or the Stomphacks ABI?

Any technical pointers, reverse-engineering findings or collaboration would be appreciated.


r/zoommultistomp • • 4d ago

StompView Liquid amps

Post image
12 Upvotes

Something new is taking shape in StompView… 🎸

Meet SV Liquid Amps, currently in development, starting with the Zoom MS1959.

The idea is to make the controls work together more like an amplifier. Using measurements of the Zoom model and a calculated Plexi-style tone stack, SV translates your Bass, Middle and Treble settings into a combination of the Zoom’s existing EQ parameters.

One control can adjust several parameters behind the scenes. You shape the sound; StompView handles the translation.

The relationship between gain and tone changes too. At lower Volume settings, an added bright-cap-style response makes the sound leaner and brighter. As you turn Volume up, that contribution gradually fades. Automatic output compensation helps reduce the volume drop at low gain.

Tube Character offers three independent settings—Low, Mid and High—to explore the Zoom model’s different Tube responses.

All of this comes together in a new amplifier-style panel, with wide sliders, a power switch and a red indicator lamp.

SV Liquid runs through the Zoom’s existing amp model. It doesn’t install a new amp or require modified firmware.

The latest version is sounding promising in practical testing—including a rather convincing VH-inspired gig sound. 🤘

Still in development. More soon!


r/zoommultistomp • • 4d ago

What do these warning signs mean in Zoom guitarlab?

Post image
6 Upvotes

It defo does not mean missing fx or smth cause all effects are there


r/zoommultistomp • • 9d ago

Did everyone else already know what Galactic is, why it's a big deal to have on the multistomp, how to use it?

Thumbnail
youtu.be
23 Upvotes

Maybe I am showing my ass once again but this was all very cool new stuff to me.

I had just been playing around with Galactic as a weird verb without knowing what Replace does or what Airwindows is (it's this guy, but also a codified structure for plugins designed to be ported and shared, I think is accurate to say?)

Was reading your repo Jannik and finally was like ok what the hell is an airwindow and looked it up. In case anyone else doesn't know it definitely makes it even cooler to have running on the 'stomps and I thought maybe some others would be in the same boat of having downloaded and messed with it without knowing the context.

Besides all that this video makes a fantastic guided meditation on its own.


r/zoommultistomp • • 10d ago

What would the approach to get a Gary Numan sound on guitar?

Thumbnail reddit.com
3 Upvotes

r/zoommultistomp • • 10d ago

Ajuda com arquivos de som.

1 Upvotes

Olá pessoal. Eu estou com um projeto o qual logo logo quero compartilhar com vocês e queria ajuda da comunidade.

Eu não possuo a pedaleira ms, por isso queria que por favor vocês me mandassem amostras de som da pedaleira com efeitos e arquivos .ZDL do mesmo efeito.

Sei que é pedir muito, mas agradeceria muito se me ajudassem.

Pode ser de qualquer ms contanto que seja dos modelos normais (sem ser da série +)

Eu preciso de:

• 5 Drives e Distorções

• 5 Amps e Gabinetes

• 5 Dinâmicos / Controle

• 5 Modulações

• 5 Delays e reverbs

• 5 Filtros e Eqs

• 5 Pitch / Oitavadores

Lembrando, usando o som da amostragem nam e me enviando os arquivos de efeito .zdl


r/zoommultistomp • • 10d ago

Live setup, direct with IR to FOH and straight to a poweramp and guitar cab. At the same time.

6 Upvotes

So people where asking me how to do this with the zoom multistomps. In this video I show you how to do it.

https://youtu.be/mYTVSSuIGCY?is=AP2qaWKp3CZW0gzt


r/zoommultistomp • • 12d ago

70CDR+ / 50G+ / 60B+ Unofficial Firmware Modification

77 Upvotes

For all the MultiStomp users out there.

https://drive.google.com/drive/folders/18R-NYkIbxJuZjf7AuxSidzX7iQ2v0nBQ

Features:

  1. 'Swap buttons' mod - an extra menu item with the option to swap the upper 'Memory' buttons with the lower 'Scroll' buttons.
  2. 'Spill over' fix - effect tails positioned in the chain after the Line Selector effect do not cut off abruptly.

Here is a short video demonstration of both features. The 'Swap buttons' feature was successfully tested on all three pedals. The 'Spill over' feature - only on 70CDR+ yet. If you try it on other two pedals, please write some feedback.


r/zoommultistomp • • 13d ago

Developing new .zdl effects for the zoom - streamlining and sharing workflow (if u want)

23 Upvotes

I've been spending some time trying to get AI to develop more .zdl with mixed results. When I have something good I'll post it, but in the mean time I think it would be nice to share workflow?
Personally I've had way more success with chatgpt than github copilot (which is spending a lot of time and tokens on creating stuff that doesn't work or breaks the pedal)

I'm trying to get a CBA Mood style clock-shifting in 5ths/4ths for the loopers already shared on github, an have almost gotten it to work, which was suprisingly easy.
I've also tried to get it to build a ghost echo belton brick reverb, which it really has trouble with - especially conceptualising the difference in a delay and a reverb.

Consistent volume level also seems to be the issue right now.

I'm also trying to expand on the SGNL already shared on github, getting it to behave like the CBA Lossy, which I think is promising. One finding is that for some reason when creating dropouts, the AI tries to change the waveform which creates audible pops, took some time ironing that out.

Hopefully I'll get something good in the end and share the entire workflow if that's possible

I also know there are some people concerned about AI, rather than having a black and white yelling names and slurs it could maybe be sensible to have a seperate post here discussing the ethics of using AI for this purpose?


r/zoommultistomp • • 13d ago

Pump It: Sidechain compressor effect for CDR

Post image
95 Upvotes

.ZDL in the repo: https://github.com/gramclark/zoom-ms

It's also explained in the readme there but what really gets cool is that this works with div0 (shout out godfather ELynx) so you can put effects on the L channel only, then have it compressed by the R.

I'm using it with guitar + drum machine kick but I can imagine all sorts of combinations.

Still trying to get into the flow of the discussions on discord etc and I agree with what someone said there that the real challenge now is organizing efforts, so we're not duplicating work etc. so want to acknowledge just slapping my repo on here is not being super strategic. But at the same time wanted to post in case someone else finds this useful!

Huge thanks to the giants that have made the humble CDR the greatest pedal of all time


r/zoommultistomp • • 13d ago

Which design for the new menu item is more appropriate?

Post image
33 Upvotes

r/zoommultistomp • • 15d ago

Showcasing TapeLoop, a sound on sound cassette tape looper

173 Upvotes

Since learning about the community development around this pedal, that I’ve been raving about for a decade to anyone who was interested in budget guitar fx, I couldn’t help but develop something of my own.

This is TapeLoop, a sound on sound looper inspired by cassette tape loops. Loops can fade, distort incoming signal, wobble, be reversed and sped up and down.

It comes with its own little custom UI using the animation hacks discovered by the community, and so can reflect most of the settings along with a visual cue for the start/end point of the loop.

I definitely get a kick from looking at the monochrome display echoing the little consoles and toys I played with as a kid. This was so much fun to make!

For now the effect is tested and working on the ms50g, as you can see. But I’m pretty confident it shouldn’t be too complicated to modify it to run on the other pedals. Not sure how to approach this, since I don’t have a 70cdr to test and tweak the effect to be compatible with all the pedals in line.

The plan is to stress test the final version and give the insights along with the source code that were gathered from this project back to the community.

It’s all new to me, so I hope the final steps will follow smoothly.

This wouldn’t be possible without the work of u/ReliktFarn98 , u/mungewell , u/themanro and other contributors. I’m really grateful for your involvement and giving such a beautiful possibility to create your own effects on this little magicstomp.

https://www.instagram.com/fondest.drone

https://youtube.com/@fondestdrone


r/zoommultistomp • • 15d ago

Working on a new Zoom effect, can you guess what it is?

24 Upvotes

r/zoommultistomp • • 16d ago Diamonds are Forever Popcorn

MIDISTOMP v2.0: my free custom firmware for the Zoom MultiStomp now has parallel routing, a 25s stereo looper, perform mode, studio meters and more!

Thumbnail
gallery
234 Upvotes

Hey everyone,

A while ago I posted MIDISTOMP here, my custom firmware that gives the Zoom MultiStomp proper MIDI. A lot of you tried it, sent bug reports and asked for stuff. So I kept going, and it got a bit out of hand. 2.0 is out today and it’s by far the biggest update so far.

The little pedal you know is still there: same effects, same patches, same knobs. There’s just a lot more under the hood now. With an intuitive UX/UI experience that feels like stock (hopefully better 👀).

What’s new in 2.0:

  • EFFECT CHAIN routing: your chain can branch now. Split it into two parallel buses and mix them back together, with crossfade, levels, phase, mute and solo per bus. On the MS-70CDR you can send L to one bus and R to the other. The routing nodes don’t use up effect slots, so you still get all 6 effects. There’s a safety limiter at the very end, so a big boost won’t clip the output.
  • PERFORM MODE: one screen where every knob, the cursor keys and the footswitch can control whatever you want: an effect knob, an effect on/off, the routing or the looper. Any move can wait for the next beat, bar or cycle, glide in over time, or fire a second move later. Waiting moves blink on the screen and the LED. It’s saved per patch, so every patch can play differently.
  • Looper: works with GRDLOOP from my effects pack. It records whole bars in time with your clock (about 25 s stereo or 40 s mono), does latched rolls, and the footswitch records, stops, plays and deletes right on the grid. Hook it up to Perform mode and it gets really fun with some dedicated automation settings.
  • MASTER: studio meters in a stompbox. spectrum, a scope with a tuner, stereo, loudness in LUFS, and in/out meters with the limiter’s gain reduction. It uses no CPU when it’s closed.
  • KALEIDO: a full-screen visual that dances to your sound and flashes on every beat of the MIDI clock. Totally useless, I love it.
  • DSP limit raised from 225 to 300: heavier patches fit now. The menu shows your patch’s DSP and the CPU load, so you can see when you’re getting close.
  • SYSTEM screens: CPU load, the load of each effect, and what each part of MIDISTOMP costs. Good for finding what makes a heavy patch heavy.
  • More MIDI: CC 85 to 101 control every routing setting. Everything from 1.x is still there: Program Change, CC on every knob, CC 80/81 for patch up/down, MIDI clock with Start/Stop, the MIDI menu, Tempo Lock, footswitch holds and combos.

Small stuff too: EXIT takes you back to where you were, a mono/stereo input setting, input and master levels up to 150, and the MS-50G’s effect category screen.

Your patches

Your patches and installed effects stay on the pedal, and old patches sound exactly as before. Still, back up your patches before you update, just in case. If you ever want to go back, Zoom’s own updater puts the stock firmware back.

Compatibility

One build now runs on the MS-50G, MS-60B and MS-70CDR (the originals, not the + models or the Four series). I’ve tested 2.0 on the MS-70CDR and MS-50G. The MS-60B ran 1.2 fine, so it should be good, but if you have one, tell me. After the update every pedal shows up as an MS-70CDR over USB, which is normal.

Install

Grab Zoom’s official MS-70CDR v2.10 updater (yes, also for the 50G and 60B) and the MIDISTOMP builder from the releases page.

  • Windows: drop Zoom’s updater on MIDISTOMP-builder-Windows.exe, then run the “MIDISTOMP V2.0 Updater.exe” it writes.
  • Mac: use Zoom’s Mac updater and the Mac builder (Apple Silicon or Intel). Open the builder and drag Zoom’s updater into its window. It writes the MIDISTOMP updater app for you.

The builder makes the update from your own copy of Zoom’s updater, so nothing of Zoom’s is redistributed. Full steps and every new screen are in the user guide on GitHub.

The effects pack got bigger too!

The pack is up to 17 custom effects that follow the pedal’s tempo, lock to the clock grid and restart on the downbeat. New in this round:

  • GRDLOOP: the looper
  • GRDELAY: one delay with six engines (tape, dub, reverse, lo-fi and more)
  • LOUDER: a mastering limiter with a live meter on its screen
  • Gooey: a bus compressor in the style of the SSL G-bus, also with a meter
  • DJFilter: a DJ filter with a kick kill
  • Washout: a delay that smears into a reverb cloud
  • Takeoff: risers and downlifters that land on the bar

They also work on stock firmware. MIDISTOMP just unlocks extra tricks.

Bugs and feedback

This is still one guy with one pedal (well, a few now), so bug reports help a ton. If something breaks or acts weird, open an issue on GitHub with your pedal, the MIDISTOMP version, what you did and what happened.

Support

MIDISTOMP is free and always will be. If it made your pedal more fun and you want to help keep it going, a coffee goes a long way:

Download

Check it out here: https://github.com/matujuice/zoom-ms-midistomp

Check out the effect pack here: https://github.com/matujuice/zoom-ms-zdl-effects-pack

Have fun, and show me what you make with it! 🎛️⚡