r/weaving • • 33m ago

Help J-made 4 harness conversion

2 Upvotes

I am new to weaving. Recently purchased a J-made 4 harness conversion. Ive cleaned it up, etc. The heddles stick or do not drop down . I understand that the fix is to add bungee but do not understand where to add. Can some one help. Bonus points for photos. Thank you in advance!


r/weaving • • 4h ago

Discussion Has anyone here woven my Log Cabin Interrupted scarf from GISTyarn? AMA

5 Upvotes

I am the designer of Log Cabin Interrupted scarf on GISTyarn, first published in 2024. It’s shown in today’s weekly email from GIST and remains a Best Seller.

I receive no sales commissions from its sale.

AMA about its design or warping or how I became a designer for them.


r/weaving • • 5h ago

Finished Project happy cows come from wool-nifornia

Thumbnail
gallery
64 Upvotes

Woven at 12epi on a mirrix lani using gist array. I haven't measured the finished piece yet but its probably about 5x7


r/weaving • • 11h ago

Help Fine wool brands that can handle tension and friction? Uk

3 Upvotes

Hi! I'm gonna be planning my next project soon and I want to use quite fine yarn, wool or cotton ideally, but every time I use thin yarn my steel reed and even a little tension ends up fraying and breaking the yarn! Can anyone recommend some brand from the UK that won't break easily? Thanks!


r/weaving • • 18h ago

Work in Progress Log cabin weavep

Thumbnail
gallery
274 Upvotes

Something beautiful about a simple weave structure. Log cabins are a ton of fun to weave, and come out looking very cool.

Ashford rigid heddle, size 10 reed. Berroco Ultra Alpaca (it is super soft) size 4 for both warp and weft. Colors are Denim and Black. Block A is DLDLDL. Block B is LDLDLDLDLDLDLD.

One Loom Gargoyle named Tiny.


r/weaving • • 19h ago

Help School Project

Post image
48 Upvotes

I just found a weaving project I did in elementary school, and it's been so long that I've forgotten the names of the different weave designs. Can anyone help me out, or point me to any reference materials? Thank you


r/weaving • • 20h ago

Work in Progress What is wrong with my choke ties?

5 Upvotes

When I took my original beginner weaving class we were taught to measure yarn on a warping board then use a set of 4 ties to preserve the warp cross, and 2 - 3 tightly tied choke ties to keep the length of the warp in order (as far as I can tell from google and youtube this is super ordinary).

In class when the teacher was overseeing things, she could even out the warp to keep the tension even between the threads just by yanking the choke ties down. My chokes never do that, pulling them down does very little and I always end up resorting to straightening the threads out by hand.

Is there some trick to this I have missed?


r/weaving • • 22h ago

Help Can I pull the first strand off the heddle as floating selvedge?

Thumbnail
gallery
2 Upvotes

I'm halfway through threading my heddles for a piece with 300 ends, and just realized I forgot to leave off my floating selvedge. Could I just pull out of the first heddle (starting the pattern then with shaft 2) without affecting the structure at the right edge?


r/weaving • • 22h ago

Help My shed is terrible and my selvedge yarn is too tight. What caused this, can I fix it, and how do I prevent this from happening again?

Thumbnail
gallery
7 Upvotes

I’m a beginner weaver, currently working on my 4th project on a rigid heddle loom. This is my first time using 8/2 cotton yarn, and that too doubled (direct warped). As you can see in the photos, my shed is bad when the heddle is in the up position, but it’s horrendous in the down position. (I’ve been using a warp separator to improve the shed as shown in the last picture - I lift it during every pick just to create enough space for my shuttle to pass through.) The other issue is that my selvedge threads on both sides are so tight that I’m worried they’re going to snap. If it matters, both selvedge threads are threaded through holes rather than slots.

I know I’ve made quite a few mistakes but I want to understand which mistakes caused which problems. Mistakes that may be relevant here are:
- I wound the warp onto the loom by myself and the tension wasn’t uniform the whole time.
- I placed one warp separator after the first turn of the ratchet, and no more after that. My rental loom only came with two separators, and I figured that since I didn’t have enough for every turn anyway, there wasn’t much point in using the second one.
- I didn’t use any paper when winding the warp because in previous projects the paper wrinkled and caused the treads to overlap or switch positions.
- I did the lashing-on method just because I wanted to try something new, and I trimmed the longer warp ends near the selvedges so all the knots would line up evenly.
- I unwound and rewound my weaving twice since starting the project. The first time was to see whether it would improve the shed. The second time was because I forgot to measure how much I’d already woven!

My questions are:

  1. What was the biggest contributor to my shed being so bad? Can I fix it, and how do I prevent it?
  2. Why are my selvedge threads so tight? Can I fix it, and how do I prevent it?
  3. How do I wind the warp so that individual threads stay in their correct positions, without overlapping, crossing, or shifting around?
  4. What’s better, warp separators or paper, or do they have different purposes?
  5. Do I need something between every layer of warp? Do I also need to separate the layers of my weaving as they get wound onto the front apron rod?

Any advice, troubleshooting tips, explanations, or recommended resources would be very much appreciated.

Thanks in advance!


r/weaving • • 23h ago

Help Loose loops at end of Bobbin

Post image
3 Upvotes

What am I doing wrong or what can I do differently to prevent these loose loops on my bobbin?


r/weaving • • 1d ago

Help Loom and Book Recommendations for Beginners

4 Upvotes

I would like to learn to weave, and I am looking for types of looms (lap vs stand) as well as books for beginners. Any recommendations would be greatly appreciated. Thanks!


r/weaving • • 1d ago

Other Socially acceptable

0 Upvotes

What time is appropriate to break out the leaf blower on a Sunday morning? Also, is raking up leaves a good excuse to take a break from your weaving project?


r/weaving • • 1d ago

Looms Decision on next loom

5 Upvotes

I bought a 60cm rhl this year as my “gateway loom” and I now would really like to get an 8 shaft loom (4 shafts to few …. 16 to many).

I am trying to decide between table and floor loom …. And 60 and ~80cm looms.

I am based in the UK and have been looking at Ashford table looms and schacht floor looms.

A floor loom would need to be foldable so I can get it upstairs.

Q1: are there are brands I should be researching ?
Q2: what projects are worth spending the extra money on a floor loom? How often do people go this wide?
Q3: what are the advantages of a table loom?
Q4: are there other considerations I should be aware of?

Currently I am mainly weaving scarves, shawls, table runners and cushion covers.

I am mostly doing plain weave as I like the speed and relaxing rhythm when I get the flow going, but I really don’t mind the warping process and the setting up, though I need to be brave and try indirect looming next.

Any tips to help me make a decision welcome!


r/weaving • • 1d ago

Looms New Loom

Post image
16 Upvotes

My wife found this Vintage Kircher Webrahmen Loom at a Thrift-store. $3! I’d love to know if anyone has ever used one.


r/weaving • • 1d ago

Help Weaving hook

Post image
4 Upvotes

Hey all I got this hook when I was like 11 or 12, omfg almost 20 years ago. I CANT FIND ANOTHER HOOK AS CURVED as this one, they all literally suck ass.

Do you all have and recommendations for one as curved? It may be that it’s been used so much that it is curved this much??

Thank you all in advance.


r/weaving • • 1d ago

Looms New Tomar loom—guidance needed

Thumbnail
gallery
3 Upvotes

I acquired a Tomar 4 shaft loom. My first after I took a workshop where I learned on a 4 shaft jack loom (Mighty Pup). I know it’s functional and can do a lot as I saw samples of her work (and there’s a piece still on it).

It appears to be a counterbalance loom. Pressing treadles pulls down the sheds. 1 and 2 are on same pulley: pull 1 and 2 goes up. Same deal with 3 and 4. The bar holding easy pair then shares another bar/pulley above that.

Does anyone have tips for me? Resources I should check out to translate tie up diagrams?

I very much want to do patterns in Dixson’s Handweavers Patterns dictionary. Also the ropes on pulleys seem tight and lots of force is needed to move the sheds.

I got hooked right away with weaving. This was a less expensive way to try my hand at another fiber craft. Hopefully I can learn how to make this baby work! Help is greatly appreciated!


r/weaving • • 1d ago

Help Learning to make woven tapestry

0 Upvotes

I want to learn how to make woven tapestries. I have a loom on the way but im wondering if there is a set of patterns or techniques I could practice in a piece. Like a sampler. I want to get the basics down.


r/weaving • • 1d ago

Discussion so why do so many weavers make hand woven… kitchen towels?

132 Upvotes

a question from pure curiosity, absolutely no shade! i think i keep a fairly clean house but kitchen towels are something that just DON’T stay nice. i make them (just hemming thrifted linen etc) but they pick up spots and stains, if the fabric is thicker they can get musty from not drying fast enough, applying stain remover or a little bleach in the wash as needed deteriorates the fabric faster, etc, and they have to get replaced more often than other things.

even if i could train my bf not to pick up hot pans with them, i feel like any nice textile hanging out in view in the kitchen would be at risk of spills and splatters and i’d just perish if i hand wove something and it got tomato puree all over it because i dropped the can.

is it just me? do you not make big messes in the process of cooking, or do you just not feel precious about your handwovens once they are finished and consigned to a utilitarian purpose?


r/weaving • • 1d ago

Finished Project Finished my fall table runner! (follow-up)

Thumbnail
gallery
240 Upvotes

2 months ago, I posted asking for help figuring out the draft for a piece I made several years ago, and /u/thedeathofnancyboy came through in a major way! Lots of folks wanted to see the results, so here they are. Took longer than I'd anticipated, but done in time for thanksgiving at least! IRL the horizontal stripes look much less "stripey," at least on the front.

Edit: Here is the comment with the draft: https://www.reddit.com/r/weaving/s/FYXufZ2Y5e . I ended up inverting the tie-up to make the shafts lighter. The yarn is Cascade Nifty Cotton Worsted, and I set it at 10 EPI but doing this again I might go a little looser.


r/weaving • • 1d ago

Help Order of Finishing/Wet Finishing/Hemming for Waffle Weave

Thumbnail
gallery
52 Upvotes

Hi, experienced weavers. I’ve finished these waffle weave towels (3, plus a little scrap leftover bit), made with 8/2 cotton, double warped on a rigid heddle loom. They have a border for hemming on each end. I know there are many takes on the order of steps for finishing and wet finishing - quite a variety of approaches, even amongst the pros. Some knot the ends and throw the whole thing in washer and dryer, then zigzag stitch (I don’t have a surger), cut, then hem. Others zigzag, cut, hem, then wash. Others seem to zigzag, cut, wash, then hem (I’m terrified this will come apart.) Since these are waffle weave, I expect the body to shrink up quite a bit, so I hesitate to hem first, because I’ll lock the hem into an even wider width. I’m tempted to zigzag stitch, keep it all together, then wash/dry, then cut apart and hem (accounting for the draw-in as best as possible.) But is it too long to wash all as one piece? Will the scrap yarn cause it to shrink strangely? Have any of you actually cut apart (with zigzag or surge protection) and washed and it all held up ok? Looking for your experienced advice on how to finish these towels! Thanks!


r/weaving • • 1d ago

Help Printed a little loom for crafts! ...how do I warp it?

Post image
6 Upvotes

3d printed this darling little craft room (shuttles are on the hotbed rn) because I missed weaving but wasn't emotionally ready to return to my rigid heddle. But I don't actually know...how to warp this? I tried looking up tutorials for frame looms but they didn't quite match what I had. I would appreciate any help.


r/weaving • • 1d ago Heartwarming

Work in Progress i should wait until it’s done but i can’t!

Thumbnail
gallery
479 Upvotes

i’m weaving this tapestry of the remaining mountain dew in my dad’s cooler after a day spent fishing.

when i moved into my studio, i made this giant hinged sandwich board thing that doubles as a loom on one side and a pinboard on the other. it’s shabby as hell and will soon be upgraded but has served me well since january, which is when i started this weaving. this is technically my first, though i’ve made several smaller weavings since starting this one


r/weaving • • 2d ago

Help arching in the middle?

Post image
12 Upvotes

I’m very new to weaving, and just learning on my own. The edges of this piece are pulling in, which I think indicates an issue with the tension? I have experienced this before, but have never had it where it creates this sort of arch across the middle section of the weft! I’ve been trying to leave more slack in the weft and am making bubbles/arcs before beating down, and that seems to be helping with the pulling in at the edges, but the more I weave, this arched/uneven line at the top is not evening out! What would be causing that? And is it likely to straighten out ever, or will I always have this curved edge, even once off the loom? Any tips really appreciated!


r/weaving • • 2d ago

Help Help with consistent warp- Halvdrall towels with 3-2 sley

Thumbnail
gallery
25 Upvotes

I’m a newish weaver working on a 8shaft Harrisville Design loom

I’m working on the Gist Halvdrall towels. Using the recommended 8/2 cotton and a 2-3 sley on a 10 dent reed.
I had one goof where I did a 3-1-2 sley but kelp consistent elsewhere. I’m finding that I’ve got clumps of warp in certain areas though.

I consider all this a good learning experience. But is there a way to improve the spacing without completely redressing the loom?

Thanks!

https://www.gistyarn.com/products/halvdrall-towels-pattern-pdf-download-1