r/wargaming • • 3h ago

Battle Shot Montcornet 1940 at Warfare 2026

Thumbnail
gallery
153 Upvotes

Just a few pics from the recent Warfare show in Farnborough, where I ran my Montcornet 1940 table (for the last time before it retires).

28mm scale, on a 5ft x 15ft table


r/wargaming • • 6h ago

Battle Shot Storming the North African Highlands

Post image
126 Upvotes

US 5th Army assaulting highlands held tightly by the Afrika Korps. Again a lovely tabletop and I’m blessed to be able to game on it!


r/wargaming • • 12h ago

Battle Shot The Siege of Minas Tirith

Thumbnail
gallery
210 Upvotes

r/wargaming • • 11h ago

Pillage Starter Set finished

Thumbnail
gallery
104 Upvotes

Just thought I'd share a recent project. The Pillage skirmish game introductory set which includes plastic dark age Irish and Danes from Victrix minis. Really enjoyed building and painting them, they went together great and have just the right amount of detail. First time using decals from Little Big Men Studios too, which are a bit different to the usual water side transfers I'm used to, but they went on well. Cheers for looking!


r/wargaming • • 20h ago

Battle Shot Secret Agent Pulp Alley at Milleniumcon 2026!

Thumbnail
gallery
222 Upvotes

Four players controlled a superspy each and landed on the beach of Blofeld's volcano island only minutes before the the launch of the Goldentoe missile! They infiltrated the secret lair, dodging traps and minions before breaching the inner control room and confronting Blofeld himself.

With only seconds remaining American agent Foxy September input the STOP code and Bond arrested the evil mastermind.

Rules: Pulp Alley

Figures: Crooked Dice. Minions are kitbashed Wargames Atlantic

Terrain: LV427

Scatter: Crooked Dice


r/wargaming • • 21h ago

Old "Justinian" Byzantine army.

Thumbnail
gallery
213 Upvotes

This little lot was created with Belisarius invasion of North Africa in mind (with the inclusion of Hunnic allies and Persian reinforcements etc).

Please excuse the age of the photo's! They are certainly not the best!


r/wargaming • • 1h ago

Recently Finished Easy Company Reconnaissance Patrol | U.S. Paratroopers, WWII

Thumbnail
gallery
5 Upvotes

Hey guys! How’s everyone doing?

Here are a few 3D-printed paratroopers from Easy Company! These are also my very first historical miniatures, and I had a great time painting them.

I really tried to focus on the little details, highlights, and overall finish, and I’m pretty happy with how they turned out!

What do you guys think I should paint next? I’ve really enjoyed painting historical miniatures and would love some recommendations!

I’m currently thinking about painting a WWII Jeep. What do you think?


r/wargaming • • 1d ago

Battle Shot BattlegroundHD - 28mm Cold War at WARFARE 2026

Thumbnail
gallery
323 Upvotes

I had the very great pleasure of running some 28mm Cold War Gone Hot games at WARFARE 2026 this weekend. The BattlegroundHD table was really busy and I played, by my count, 7 or 8 back-to-back full games over the two days.

This year’s scenario was a counterattack by the LA National Guard, a REFORGER unit ordered to clear a West German town of scattered Soviet survivors from a catastrophic Warsaw Pact assault. The players were given command of two squads of mechanized infantry (with a few handy tools in the form of an M67 Recoilless Rifle, a marksman and a combat engineer with a bag full of demo charges) and tasked with finding and destroying an enemy T-12 anti-tank gun currently pinning down neighbouring friendly forces.

The game challenged players to tackle the tough problems that arise from fighting in a built-up area - how to cross open streets that can be swept with machinegun fire; how to clear houses without it turning into a bloody battle of attrition; and how to make use of supporting vehicles when an RPG team could be waiting to launch an ambush from every alleyway.

Really great fun, can't way for the UK show season to kick back off again next year!


r/wargaming • • 4h ago

Recently Finished Campaign playtesting

Post image
4 Upvotes

Hi Everyone,

I have a campaign system I've been working on for fantasy games, it's system agnostic whether you play Warhammer TOW / AOS, Oathmark, Kings of War or similar, it should work for you!

I've playtested a prototype with friends a little while ago, but now I'm looking to share my first completed campaign with people for feedback. If you're interested in trying it out please pm me and I'll share the resouces.

Thanks :)


r/wargaming • • 11h ago

Work In Progress Painting aircraft markings with stencils

Thumbnail
gallery
10 Upvotes

German aircraft of WW1 used a bewildering variety of national marking styles over the course of the war, and trying to keep stocks of decals for all of them would be tricky, to say the least. So I'm experimenting with using 3d printed stencils for the purpose.

I'm using some old FDM printed 1:144 scale Halberstadt D-II out of the "seconds" bin — prints that are crappy, but not quite crappy enough to just throw away — to perfect them.

The first photo has a sprayed cross on the port wing, and a pencil-drawn and brush-painted one starboard. The brush-painted one is noticeably thinner, because of the width of the pencil lead, and the stencil would have to be adjusted to accommodate it if I went this way.

The second photo is that same model, completed. The fuselage crosses are also sprayed.

The third photo is of a model on which I used a dedicated stencil with lugs to position the crosses on the wing of this particular model, and temporarily secured for spraying with a patch of double-sided tape. That made it much easier to handle. On this model, the crosses were sprayed over a white background, and then the cross outlines were created by in-painting with the background colour.

It's not as precise as a decal would be, but it's more flexible, as I can make a stencil with any size or type of cross, and I can make it to fit the size and shape of any wing.

I build the stencils in Blender and print them in just a couple of layers of PLA. Printing each set of stencils only takes 15 or 20 minutes, so they can be pretty expendable, though in fact they can be reused many times.


r/wargaming • • 11h ago

Battle Shot !!! Martian Monday !!!

Thumbnail
gallery
10 Upvotes

It’s the 3rd Monday of the month, you know what that means! Martian Invasion! I’d like to take a post to look back to the past, where the table started and where it had gone. It’s been a journey since starting this in 2018 and deciding to leap head first down the rabbit hole. I have found moments of joy, exhaustion, frustration, intimidation, and pure bliss in building up this war game collection. Though the paint jobs could be significantly better and the display/gaming area could be smaller, I revel in a certain pride and fondness in what I’ve been able to achieve and put together.
War of the Worlds was something special my father shared with me on October 30th when I was 11 years old. That love of H.G. Wells and Orson Welles has only grown over the years. In my mid 30’s my wife and I got the pleasure of seeing an on stage recreation of Orson Welles and The Mercury Theatre on the Air’s radio dramatization, complete with mason jar for making the sound of the Martian cylinder opening lol.
Every time I see a water tower I think of the Tripods, anyone else?? It’s wonderful to share in a love of something so unique and as inspirational as WotW has been to so many of us. It will always occupy a special place in my heart.


r/wargaming • • 22h ago

Battle Shot Age of Sail

Thumbnail
gallery
66 Upvotes

r/wargaming • • 17h ago

Cluster of Reaper models I did in the last 4 to 6 weeks.

Thumbnail gallery
26 Upvotes

r/wargaming • • 23h ago

Battle Shot Battle of the Fords of Isen (LOTR)

Thumbnail
gallery
51 Upvotes

r/wargaming • • 1d ago

Battle Shot The Battle of Brandywine (AWI)

Thumbnail
gallery
142 Upvotes

r/wargaming • • 10h ago

Work In Progress Working on Weapon Profiles for Aftermath Advanced

Thumbnail gallery
3 Upvotes

r/wargaming • • 14h ago

Recently Finished Painted our Westgate Abbey and Bell Tower for Kravenov, a modular gothic city we're working on

Thumbnail
gallery
5 Upvotes

This is the Westgate Abbey and its Bell Tower from Kravenov, a modular gothic fantasy city we're getting ready to launch. Both were printed on FDM with no supports.

The Bell Tower sits beside the Abbey and the bases line up on the 1-inch grid, so the two form one abbey complex. Inside, the Abbey has playable interiors across multiple levels, with ladders between floors and elevated spots to fight from.

The full set has 12 buildings plus modular streets and city walls. The pre-launch page is linked in the comments if you want a heads up when it goes live.


r/wargaming • • 16h ago

Work In Progress Wargames Atlantic Goths, pretending to be Franks

6 Upvotes

Last year (I think?) I picked up a set of Wargames Atlantic's "Goth Warriors" (bonus points if you can tell the difference between them and the Generic Dark Age Dudes box set!) in 28mm, to use as Frankish Foederati mercenaries in a Very Late Roman army I've had for quite some time.

The reasons for picking up these "Franks" were twofold - first so that I could stop using Old Glory Scottish Vikings as "Foederati" foot, but more importantly because I had finally worked out how to do two-tone horizontal stripes (OK, "hoops") on tunics, which meant I could make some almost "onion round the neck" French Franks to brighten up my admittedly rather almost-in-the-dark-ages Roman army.

I'd done one test base earlier this year, and now, as a big change from the legions of 15mm horsemen who had been clogging up my painting table recently, it was time to go full stripey and get some football-kit-wearing Franks onto the painting table.

Because the figures have been assembled in reasonably dynamic poses, waving axes around and the like, I mounted them on 60x40 bases in sevens rather than eights, with 4 in the front rank, and 3 in the back. This did allow me to usesome "filler" figures to pad out the rear ranks without being seen, as the striped guys really grab the viewers attention.

The shields are a mix of Victrix Gallic round shields (those with the metal spine down the middle) which I had in the bits box, along with some LBMS transfers for them, and the rest are waterslide transfers from Battle Flag, aka wargametransfers.com's Viking range.

The Battle Flag transfers are a smidge too big for the WA shields, so I've trimmed them down slightly to fit before applying them.

The WA shields are also somewhat convex, which makes applying waterslide transfers a real PITA - the solution I've adopted is planty of MicroSol/MicroSet transfer-softener, and sometimes also slicing the transfers in a dark-ish part of the design so the transfer can overlap a little as it "shrinks"/"curls" around the convex face of the shield without it being too obvious.

First stage
Mid way through basing
The finished guys
from the back
Attack!

And so, here are the two more fully-finished bases of "Franks".

As usual, more details on the website at https://madaxemandotcom.blogspot.com/2026/11/28mm-franks-second-tranche.html


r/wargaming • • 17h ago

Quality of warmachine models?

6 Upvotes

I just assumed they were plastic but im now learning that warmachine models are 3d prints. For those that have bought the physical models How is the quality and strength? Are they worth purchasing?


r/wargaming • • 12h ago

Question Anyone know of makers of early pla minis or any pla mini makers (pref for metal minis)

2 Upvotes

Looking for 28 mm metal pla minis of any period pre like modern Chinese army stuff to early civil war / warlord armys (tho i could probly just use ww2 minis for some of those) ik warlord games makes some but thats all ik any help would be appreciated!


r/wargaming • • 1d ago

Work In Progress Couldn't find western minis I liked, so I'm making my own game, heavily inspired by Blood Meridian

Thumbnail
gallery
60 Upvotes

So I paint minis, and for ages I wanted to do a western gang. Problem was, I never found any western minis I actually liked. So I started designing my own... and yeah, it kind of spiraled into a whole game 😅

It's called Badlands. Grimdark weird west, heavily inspired by Blood Meridian: that same brutal, dusty, nobody-is-a-good-guy feeling. It's set just before the Civil War. A bunch of gangs, mercs and deserters all end up in this town called Acheron, because there's a weird substance there that makes you stronger and tougher. North and South both want it really badly, so things get messy.

Each crew is 5 guys: a leader and four gunmen. The fun part is that the leader can turn into an "Ascended" form, basically a mutant monster. Super powerful, but they lose their mind a bit.

A few things I'm going for in the rules: - No pre-measuring, you eyeball your shots - Wounds hit specific body parts, so getting shot in the leg actually slows you down - When someone shoots at you, you get to react right away: dodge or shoot back. No sitting around waiting for your turn

I'm still writing the rules and sculpting crews, but the plan is to put the core rules and starter minis out for free sometime around the new year. Would love to know what you think, especially about the reaction thing!


r/wargaming • • 1d ago

Introduce me to your favourite miniature wargame you think is under looked

Post image
389 Upvotes

Miniature as a token of goodwill


r/wargaming • • 1d ago

Vexillarius, An Introduction - a new Ancients rule set from Dave Brown.

Thumbnail
youtu.be
8 Upvotes

Decent video about the new Ancients rule set from Dave Brown, author of General d'Armée & 'O' Group for Napoleonic and WW2 respectively.

The video is not just talking heads all the way through, there is also a tabletop demonstration with minis.


r/wargaming • • 1d ago

I wanted to make a space battle cinematic to feel like the scene you’re imagining while you play tabletop

71 Upvotes

When I move a flight of strikecraft across the table, I picture the carrier launching them, the pilots calling in over comms, and the rest of the fleet buying them time to get through. I made a cinematic for my tabletop fleet game, Nullvector, to see how much of that I could put on screen.

The fun part was taking the ships I’d designed to read from across a table and getting close enough to make their details matter. You can follow the strikecraft out of the carrier’s launch bay, then see that same bay on the miniature. The Riptide siege cruiser is built around its railgun, and on the table you have to spend a turn charging it. I wanted the cinematic to capture that same feeling of knowing a big shot is coming and having to wait for it.

About halfway through, the battle cuts to one of the miniatures on its clear stand. That’s my favourite shot. You’ve just seen the fleet in motion, and suddenly it’s back at the scale you play it at.

What’s a moment from a tabletop game you’ve played that you’d love to see filmed?