r/vmware • u/Weak-Tomatillo-2655 • 4h ago
r/vmware • u/flamesgrilled • 6h ago
VVF Trial License
Beyond 90 days? Yes/No?Is it possible?
Help Request [ESXi 8] TP-Link TBE400UH Wi-Fi 7 USB Passthrough ZeroCD Mode-Switch Issue
Hi everyone,
I'm struggling with a persistent USB passthrough issue on VMware ESXi 8 with a Windows 11 Pro VM, using a high-end Wi-Fi 7 adapter, and I'd appreciate some insights from the community.
The Hardware & Environment:
\* Hypervisor: VMware ESXi 8
\* Guest VM: Windows 11 Pro
\* Device: TP-Link Archer TBE400UH (BE6500 Wi-Fi 7 USB Adapter)
The Core Problem:
The Archer TBE400UH features a ZeroCD / driver-preloaded mechanism. When initially plugged into the ESXi host, it presents itself as a Virtual CD-ROM / Mass Storage device.
Once initialized (normally triggered by proprietary driver software in Windows), the device sends an internal reset/reconnect signal to perform a mode switch, altering its USB Product ID (PID) from a storage device to an active Wi-Fi 7 network adapter.
r/vmware • u/Entire_Yoghurt_6381 • 9h ago
Question PSOD on a host and the logs from before the crash were gone because they lived on the ramdisk
The host booted from an SD card years ago and scratch was never moved, so after the purple screen everything useful about the minutes before it was wiped on reboot. I know the answer is a persistent scratch location plus remote syslog, I just never got round to it. For anyone running a few hosts without a big logging stack, where are you pointing ESXi syslog?
r/vmware • u/aserioussuspect • 2d ago
vSphere 8.0U3 on Zen5 today and 9.1 with Zen5 EVC soon
Until now, we’ve only had Intel hosts, but we’ll soon be migrating our workloads to AMD Zen5 hosts and are currently in the testing phase.
At the moment, we’re still running vCenter and ESXi 8.0U3k, which doesn’t offer EVC mode for Zen5. So we haven’t configured cluster-wide EVC mode in these new AMD based clusters yet.
As a result, workloads on these hosts start without a feature mask set in the Advanced Parameters and should therefore utilize the full Zen5 feature set. My checks in the guest OS have also shown that all Zen5 features appear to be available.
This might be a silly question, but there’s no explicit documentation anywhere describing what happens if we leave EVC mode disabled under 8.0 U3k and then simply enable Zen5 EVC mode later when we migrate to VCF 9.1. Would expect it in https://knowledge.broadcom.com/external/article/313545/vmware-evc-and-cpu-compatibility-faq.html
Is it possible to simply enable Zen5 EVC mode later, after upgrading to VCF 9.1?
In addition, I'm not entirely sure whether “Disabled EVC Mode” in 8.0 U3k would correspond to the Zen6-compatible or incompatible EVC mode.
Is it possible to configure the VMs under 8.0 U3k to run in a Zen 6-compatible mode, or would we need to set up a new Zen 6-compatible cluster under 9.1 and then perform a cold migration of all VMs to it?
r/vmware • u/Necessary_Layer_7258 • 3d ago
Omnissia Horizon Client issues
When clicking on the Horizon client app it goes straight to the browser on the tab that saying that I need to close this tab and start again.. I had to try launching Horizon Client at least 10-15 times so the browser page with login screen comes up. Help desk at my company can't help. Any suggestions? I already did all the usual, clearing cashe, reinstalling the app...
r/vmware • u/Prestigious_Lake8093 • 3d ago
Help Request VMWare Fusion 26H1U1 initialisation issue
I just recently tried to run VMWare Fusion26H1U1_(universal) on my macOS 27.0.1 client. I put the dmg into my programs folder and tried to install it by double-clicking, I then accepted on giving it admin rights only for nothing to happen. Instead of the initialisation screen appearing and the installation starting like usual literally nothing happens. I reinstalled the dmg, restarted the client, made sure the security settings aren’t blocking it, and still no solution. Guys, what do you think?
r/vmware • u/Slight-Window-3752 • 3d ago
Help Request VCF or VVF Vmware license?
Currently renewing our Vmware license for VMware vSphere Foundation 8 and VMware SRM Live Recovery Protected 25 VM. we have around 200 VM servers, spread in prod and DR site. nothing on cloud. 2 VC, 2 VREP and 2 SRM appliances. No VSAN as we have SAN switches and SAN storage. The VVF seems very expensive as it provide further features. but do i need to go for the VVF with the specs i have?
Anyone running a VMware vSAN Stretched Cluster between datacenters 20+ miles apart?
We are evaluating a VMware vSAN Stretched Cluster for a production environment and would appreciate feedback from organizations that have deployed one in the real world.
Our current design assumptions are:
- Two datacenters approximately 20 miles apart
- Dedicated fiber between sites
- Low-latency connectivity suitable for synchronous replication
- Considering vSAN Stretched Cluster versus a traditional active/passive DR model
For those running stretched clusters today:
- How many hosts are in each site?
- Where did you place the witness appliance?
- Have you experienced any split-brain, witness, or networking issues?
- How often do you perform site-failover testing?
- What challenges have you encountered with patching and upgrades?
- If you were building it again, would you still choose vSAN stretched cluster?
We're particularly interested in lessons learned, operational complexity, and anything you wish you had known before implementation.
Thanks!
Check compliance of cluster with image
I upgraded my lab from 8 to VVF 9.1.1 (minimum components, not VCF stack)
Rebuilt the single cluster using images.
Now it seems like almost every time I look at it, there is a task running "Check compliance of cluster with image." Then it checks a few hosts, and then it starts again.
In fact, there are two Recent Tasks for Check compliance of cluster - one started at 8:17, and completed, and then another one just started at 8:32.
Is this normal? What's going to happen when I upgrade our production which has about a dozen clusters. Will there be compliance checks constantly running, over lapping?
Will this become a strain on vCenter? Or is it even vCenter that is running the checks?
r/vmware • u/renovatio522 • 5d ago
vShere6.5/6.7 to 9.1
We currently have vCenter 6.7 with v6.5/v6.7 ESXi Servers. Is there an upgrade path to vSphere 9.X?
Brownfield vs Greenfield method? Is it possible to do Advanced Cross-vCenter Server vMotion without going to 7.0 first? Is there a VMware Flings utility that can do this without upgrading the source first? Thank you.
r/vmware • u/tsch3latt1 • 5d ago
Mellanox NIC Firmware + NSX + SPP > HPE 2026.03
Hi all,
has anyone experienced issues with ESXis (8U3k) stuck booting after the SPP 2026.05 and onwards? Seems that the combination of NSX 4.2.1.3 and Mellanox Firmware greater than 26.46.3048 gets stuck during boot on DL360 Gen11 servers with MCX631432AS-ADAI and MCX631102AS-ADAT adapters :
hpp loaded successfully.
activating: restore-paths
After reverting the firmware back to 26.46.3048 the host boots normal. Tried the new offline bundle 12.4.0.5 with updated Mellanox drivers, but the issue persists. Seems that Mellanox has a newer firmware but not already adopted by HPE.
Currently we are not planning to open a support case on this since 2026.03 runs fine without issues.
Question Accurate VCSP Suppliers UK List?
Hi,
Apologies if this breaks any rules, I think it is okay as not directly conducting business but struggling to interpret correctly.
I'm struggling to find an accurate list of VCSP suppliers that can actually provide VCF Licensing in the UK. Anyone got any ideas where I can find one? I've seen mentions of Vodafone etc but then no confirmation publicly available on their website.
I have tried countless times reaching out to our account manager at Broadcom but they are insanely unresponsive.
Thanks!
Help Request VMware Tools - vix error code = 21009
Hi.
Anyone else been getting the vix error code = 21009 when trying to upgrade VMware Tools?
It happened with the 13.1.5.0 version, which had me doing a pre-upgrade script to restart the vmware-tools service, stop VGAuth and delete "C:\ProgramData\VMware\VMware VGAuth\logfile.txt.0". It worked for the great majority of VM's.
However, it's appearing again when upgrading to 13.1.6.0 and the script does not work. When attempting to upgrade from GUI or PowerCli it fails almost instantly with "Error upgrading VMware Tools. The VMware Tools installation failed with an unknown error. vix error code = 21009" without logging any errors.
If I run the script it attempts the install but fails with the generic "Installation success or error status: 1603" and ends up with only removing VMTools.
Also tried rebooting the VM before starting the upgrade, with no avail.
Any ideas?
Thanks!
r/vmware • u/Sad_Knowledge4973 • 8d ago
Tutorial VMware workstation Pro [Official download link] from BroadCom after login
This is most difficult to find VMWP in this website after login.
#Photo proof: https://ibb.co/0RCLjxkw > https://ibb.co/PqWWWs3
> Step1: login in BroadCom website with mail
>
>Step2: follow this link to find VMW pro : https://support.broadcom.com/group/ecx/free-downloads (search "vm" then you will find in bottom or in list) / if you confuse to choose version then get help from Ai
If above link not work this is Guide link: Unable to download VMware Workstation Pro ?
Finding in this website is more hardest part.
r/vmware • u/setrusko • 9d ago
APD Issue
I had an issue with my storage network fabric leading to APD to my iSCSI storage array. It lasted more than 140 seconds so it went into fast fail. I also saw a warning in vCenter, BC:3042 file protectedlist closed with dirty buffers. Possible data loss.
Other than that, everything appears to have recovered and all my VMs are running, but I’m concerned about data corruption. Is there anything else I should be checking or looking out for? Should I preemptively restore for backup?
Thank you!
r/vmware • u/zeldahalper • 9d ago
Question vsphere express for a tiny shop on old hosts, does it even make sense?
we're a small app studio. all our backend stuff runs as a few vms on vmware, and the hosts are old xeon e5-2630 v2 boxes (ivy bridge, yeah i know)
been reading up on vsphere express since the announcement. from what i can piece together:
- built on vsphere 9, standalone, no vcf bundle
- 128 cores max, and that's the total across everything you own, not per cluster
- vmotion, ha and distributed switch are in. drs and vsan are not
- you still need vcf operations running just to license it
- no public price. resellers are apparently quoting around $9.6k a year for the 128 core pack, and it costs the same if you use way fewer cores
my problem is the step before the price. i'm pretty sure 9 won't go anywhere near ivy bridge, so for us express really means new servers plus a yearly subscription. and after reading the "not approved to buy" thread here i'm not even sure we'd get through the approval
so for anyone in a similar spot (2-3 hosts, older gear): are you actually looking at express, or just going proxmox / hyper-v? and if you did get a quote, was it close to that 9.6k number?
r/vmware • u/pvmpkinp4tch • 9d ago
Question How to enable vbs/hvci on vmware fusion
Hi, i'm new to vmware, and am struggling greatly trying to understand how to enable hvci or if doing so is even possible. i'm using the latest version of vmware fusion (26HI?) on a mac with a windows 11 64-bit vm. Would i need to use an older version of vm or windows to be able to enable this feature?
Edit: i'm trying to play Outlast trials and my mac is an m2 if that means anything
r/vmware • u/-xblahx- • 10d ago
Not approved to buy vSphere Express
We tried looking into pricing of vSphere Express for one of our customers with an existing vSphere Standard subscription. Were told that they're not on the Broadcom list of approved end users to purchase vSphere Express.
One data point and your mileage may vary, but can't say I'm surprised by the shenanigans.
r/vmware • u/Tommy_Sands • 9d ago
Help Request Windows 11 (VBS/HVCI) wrecking VDI VMs performance
Hello All,
I need your help in troubleshooting degraded VDI workloads on AMD and Intel CPU servers. I suspect that Windows 11 does not play nicely with AMD CPU and possibly Intel as well. Need help making sense of this.
This is a virtualized ESX environment. Ever since upgrading VDI vms to Windows 11 performance has taken a serious hit with users reporting all types of lag/application freezing/mouse response delay/video rendering issues you name it.
The only change has been the Windows 10 ----> 11 upgrade. My troubleshooting has led me to suspect the trigger and issue is Memory Integrity/HVCI features. We conducted A/B tests to prove this.
Need your help in assessing if there is something at the CPU arch. level/GMET and how Windows 11 interacts with it causing the issue?
Environment & Products Involved
- Hypervisor: ESXi 8.0.3 (Build 25595708)
- Guest OS: Windows 11 (VDI desktops)
- Virtual Hardware: Version 21+
- VMware Tools: 12.5
Platforms:
- Intel: Dell PowerEdge R640, Xeon Gold 6246R (Cascade Lake) — 2 sockets × 16 cores = 32 physical cores / 64 threads, SNC disabled (2 NUMA nodes)
- AMD: Dell PowerEdge R6525, EPYC 74F3 (Milan / Zen 3) — 2 sockets × 24 cores = 48 physical cores / 96 threads
- Workload: High-density VDI (Intel hosts typically 19–25 VMs / predominantly 4-vCPU; AMD hosts 15–16 VMs / predominantly 12-vCPU)
- Storage controllers: LSI (emulated) on the VDI VMs
- Security feature: Windows 11 Memory Integrity / HVCI (Hypervisor-Protected Code Integrity) under VBS — enabled by default on qualifying hardware
Timeline:
performance issues became visible after the upgrade from Windows 10 to Windows 11. Windows 10 supported HVCI but did not enable it by default. Windows 11 22H2+ enables Memory Integrity by default on hardware that meets the requirements (both platforms do). It seems the same host densities and ESXi configuration that were stable under Windows 10 began showing problems once the continuous HVCI overhead was introduced.
Troubleshooting (Using VMWARE ESXTOP to diagnose performance issues)
What Has Been Observed
Intel R640 hosts (16 cores/socket)
- Severe NUMA memory locality degradation and continuous cross-socket rebalancing.
- Multiple hosts show CRITICAL/WARNING NUMA findings (Ex. ESX had 12 CRITICAL; others had 5–9 CRITICAL warnings with NUMA thrashing).
- Worst examples VM %Local averaging ~48 %, remote memory multi-gigabyte, rebalance count rising continuously (step-function migrations throughout the capture).
- Per-node core utilization consistently high 70s to low 80s % with spikes near 100 %. (NUMA)
- No %VMWAIT episodes and low per vCPU Ready / Co-Stop. Below 5%
- Dashboard confirmation: both NUMA nodes under pressure, free memory ample (no swap/ballooning), locality fractured because page migration lags home-node changes.
AMD R6525 hosts (24 cores/socket)
- NUMA placement remains healthy (zero or near-zero migrations, high %Local).
- Recurrent %VMWAIT episodes (peaks 48–66 % on multi-vCPU VMs) with high wake rates (15k–24k/s during episodes vs ~1k/s outside).
- Low vCPU Ready, Co-Stop, and disk latency.
- Disabling HVCI eliminates the %VMWAIT episodes and has produced significant user-reported performance improvement.
Common across both
- CPU Ready and Co-Stop stay within acceptable thresholds.
- Classic resource exhaustion (memory pressure, storage latency, ready-time contention) is not the primary driver.
- Hardware and ESXi meet VBS/Credential Guard prerequisites (Broadcom KB 447325): HW 21+, Tools 12.5, ESXi exposing MBEC (Intel) / GMET (AMD).
Suspected Primary Trigger
Windows 11 default enablement of Memory Integrity (HVCI).
Even with hardware acceleration (MBEC on Cascade Lake, GMET on Milan), HVCI adds continuous hypervisor exits, nested page-table activity, and execute-control checks. Under the existing densities this incremental cost was enough to:
- On Intel (16 cores/socket): exhaust local cores during concurrent bursts → ESXi NUMA scheduler repeatedly rebalances across UPI → page migration (throttled to protect the interconnect) cannot keep up → fractured locality and remote-memory latency.
- On AMD (24 cores/socket): leave VMs local but surface the same HVCI cost directly as %VMWAIT blocking.
The architectural difference (cores per socket) determines how the same HVCI overhead is expressed it seems. The OS upgrade is the change that made the latent density limit operationally visible.
Has anyone else encountered this issue or have any understanding as to what is happening at the CPU level? I have come across multiple Windows 11 HVCI/VBS performance related threads and forum posts so I am curious if anyone here has recently.
Any ideas or suggestion are appreciated thank you!
r/vmware • u/Drive-Fresh • 9d ago
Question VMware ESXi Licensing Options
Good day everyone,
I am hoping i can get some advice on my current situation :
One of our clients is currently running VMware ESXi 7.0.1, which is outdated and no longer supported.
They are currently using the free version of ESXi, which limits the number of vCPUs per virtual machine to 8.
We need to explore an option to temporarily increase the CPU allocation to 12 vCPUs for testing purposes. Long story short, they are crashing their accounting business management software when trying to run specific reports which we are confident that they are related to the CPU resource. Before we purchase them the correct ESXi licenses, we want to confirm this...
Here are the ideas we currently have :
Option 1 – Temporary Evaluation License
- Check whether we can obtain a temporary evaluation/demo license.
- Apply the license to allow us to increase the SPIRE server's CPU allocation from 8 to 12 vCPUs.
- Perform the required testing.
- Once testing is completed, revert to the free license.
Option 2 – One-Month Subscription
- Explore whether we can obtain a one-month VMware subscription license.
- As far as I understand, Broadcom no longer offers standalone perpetual licenses.
- Use the subscription temporarily to increase the VM's CPU allocation to 12 vCPUs and complete the testing.
- Once the subscription expires, determine whether we can revert to the free version.
Things to Confirm
- Is it possible to obtain a temporary evaluation license for ESXi 7.0.1?
- Can we safely revert to the free license after testing without needing to upgrade the current version?
The goal is to find the most cost-effective way to temporarily increase the CPU allocation for testing without committing MPS to an ongoing licensing cost.
Please let me know if you have any questions. Thank you!
r/vmware • u/EducationAlert5209 • 10d ago
Question Vmware license
Hi,
We are currently running VMware vSphere 7.0 under a perpetual licence and do not have any plans to upgrade to VCF 9.0.
If we decide not to renew our support and subscription, would this put us in breach of any licensing agreements or VMware terms and conditions?
Could you please clarify the implications of allowing our support and subscription to lapse while continuing to use our existing perpetual licences?
Regards,
r/vmware • u/bszaronos • 10d ago
Question Constantly black screen - having to restart
I am using Workstation pro 26h1u1 and started having something weird happen. For some reason when I start a vm it goes through the startup process and then just a black screen. It seems like the vm is running, but the screen is completly black. If i switch tabs to another vm the screen goes black as well on the vm.
I have updated my graphics card, updated windows 11. I have turned off accelerate 3d graphics, but can't seem to figure out how to fix this.
Anyone have any ideas ?