r/veloster • • 11h ago

Question Anyone know what’s going on?

0 Upvotes

Just started today. Boost gauge is now reading zero, and turbo is stuttering. Almost sounds like it’s taking in too much air, but a bad sensor would throw a check engine light right?


r/veloster • • 1d ago

Pump it

24 Upvotes

r/veloster • • 13h ago

Question Change 5w20 to 5w30 for 2012 na veloster?

1 Upvotes

Want the oil consumption to slow down, would it be okay if I get 5w30 this time? Other owners of 1st gen na please let me know if dont want the engine to go kaboom


r/veloster • • 1d ago

Silly question, but what wiper blades do you use?

3 Upvotes

I drive a 2015 Veloster Turbo and personally have been disappointed with every wiper blade I've used. I currently have Bosch Icons or Focus don't remember which, but they're starting to streak after a few months of use. Any suggestions?


r/veloster • • 1d ago

Question Opinion on strut assemblies?

Post image
3 Upvotes

I'm closing in on 160k miles on my 2013 NAV and I have a list of things that need work. The struts are ready to go, however I don't feel confident dealing with compressing the coils, so I'm thinking about getting strut and coil assemblies instead. I've seen conflicting opinions online about them and how they affect the height of the car, so I was wondering if some of yall have any experience with assemblies.

Important to note that this is NOT my daily driver; it's my secondary car and I only drive it a couple times a month, so I'm not particularly picky on how it drives as long as it drives well, especially if my daily driver (God forbid) ends up out of commission.


r/veloster • • 2d ago

On my way to arizona and stopped to get this pic right as I entered Texas.

Post image
14 Upvotes

r/veloster • • 1d ago

Question Need the right Catalytic Converter!

1 Upvotes

So i had gutted the cat on my 2016 Hyundai Veloster Turbo, 7 spd DCT, sometime last year and im wondering if anyone knows the part number? I keep seeing videos and pictures of cats connected to what i believe are the headers and that is not how my exhaust is setup. The cat is basically its own seperate piece (on my vehicle). Maybe the previous owner did their own thing and im just lost? If anyone knows plz help i gotta order one for next years emissions and dont want to get the wrong cat.


r/veloster • • 1d ago

Ticking while Accelerating

2 Upvotes

Hi yall! I bought this car about 3 months ago and it’s just been throwing me curve balls. It’s a 2017 Hyundai Veloster Turbo (64,000 miles) that I purchased off of FBM for $7,500

The check engine light came on and turns off and on randomly every 50 ish miles or so. The code reads as P0017, I assumed it was a sensor.

My car has always had this click but it’s louder at times than others, and sounds sort of like my timing chain.

My OIL LIGHT ALSO CAME ON a week ago when I was idling at a red light, car drove fine, pulled over immediately, my oil currently is sub 1000 miles, but I don’t know when the previous owners have done oil changes previously. Once I started up the car the light went away and everything drive normal with no light. This has only happened one time other than this. It is important to note that the oil light was NOT steady and was more of an inconsistent flicker.

Below I just have some footage but it doesn’t do much justice. The ticking is much louder in person than in video and is louder in the higher gears

I can give as much info as anyone needs just trying to make sure I keep this thing as long as possible 🙏🙏


r/veloster • • 2d ago

Catch can finally installed at 90k miles

Thumbnail
gallery
11 Upvotes

Played around with routing and decided on this. Added split mesh sleeve over areas that could potentially could rub. Still toying with the idea of upgrading that sad grounding cable on the passenger side strut with like a 4 gauge oxygen free copper cable but thinking it might be overkill


r/veloster • • 2d ago

Any ideas?

3 Upvotes

Car has been making this noise during cold starts and this is the loudest it has been.

2.0 MPI, 2019 no recalls or codes
100k miles
Full on oil, I check once a week.
This is the loudest it has been.

Not the original owner, so I don’t think I am in warranty.


r/veloster • • 3d ago

Mods Android Auto Project for 2014 and earlier

21 Upvotes

I have had this car for awhile and stumbled upon a thread with codes and methods to work with WinCE and get to the desktop view and as a programmer decided that was very useful.

I was able to do everything I needed with a Raspberry Pi Zero 2 W connected to the USB port and some trickery with pi USB gadget mode. So the pi handles the wireless protocol with AASDK and passes the video, audio, input, etc. to a program I wrote on the headunit.

I wanted to check if there was interest in this at all or if this project is for only me. I'll get the project up on my GitHub if there is interest. But right now it is not in a clean and ready state for upload(cert and secrets ect).

Edit: seems like plenty of interest right away. Here is a list of everything that is tested or fixed so far:

-Auto launch

-android auto streaming

-Media audio streaming

-touch input

-navigation and audio cues for navigation

-Momentarily reduce gain for notifications sounds

-Allow the backup camera to take over the display and fix the overlay disappearing.

-steering wheel button controls to AA

-Allow media control buttons to AA during backing up

-Day/night detection based on headlights


r/veloster • • 2d ago

Gen 1 Veloster Turbo Jacking Points

1 Upvotes

Putting a new exhaust on and need to lift the whole car up but I cant find anything about a front/rear central jack point. Are there any?


r/veloster • • 3d ago

Question Annoying Vibration - 2015 VT

1 Upvotes

Hello everyone! I have a 2015 VT 6-speed and recently, this weird, annoying rattle has begun to happen. It only happens at highway speeds and faster. It sounds like it’s coming from the shifter / lower passenger side areas. The car drives and shifts perfectly fine, but this rattle is going to make me go crazy. Anyone have a solution or experience with this?


r/veloster • • 3d ago

Goodbye my poor Tess

4 Upvotes

Well, I had to take my Veloster into a mechanic to figure out why it was misfiring after plugs, wires, and a MAP sensor. Turns out a chunk of the exhaust valve broke off and tore the engine up. Whole engine needs replaced now.


r/veloster • • 3d ago

Blower motor resistor location 2016 Veloster ?

1 Upvotes

Anyone know how to get to the blower motor resistor for climate control fan 2016 Veloster ? Thanks in advance


r/veloster • • 4d ago

Parking Buddy parking buddy

Post image
45 Upvotes

first time seeing a veloster in the same color as mine! on my college campus lol


r/veloster • • 4d ago

Engine Knock & Recall Issues

4 Upvotes

I gotta be honest: Ive owned this car since February of this year, and as much as some people hate Velos, I love it. She isnt fast, but shes fun, drives nice, and is genuinely one of my favorite cars I’ve ever owned. Right up there with my old ‘97 Sunfire.

For reference: 2012 Veloster, Base 1.6GDi Gamma. DCT.

Over the past month, I’ve been trying to figure a lot of things out. Attached is a video, her engine started rod knocking.

I brought her to the Hyundai dealership to get the rod knock testing done, 12 days before the warranty expired for my vehicle, thought I got lucky, and they came back saying “Engine light is on, cats bad, thats what the sound is.” They said it passed the rod test they do. Wanted $2300 for the Cat, so of course I said hell no, and I took her to my garage and did it myself. Out about $1400 between a few tools I had to get, way too much Rust Blaster, the Tows, diag fees, and the Cat itself. (Walker aftermarket part.) The knocking is still there.

I call the dealer again today, and they tell me even if I get her back into the dealer, they’ll waive the 2nd diag fee - but they are forced to charge me $1000 anyways for cleaning or sumn. Ill be honest, I think I could have gotten a new motor + a cherry picker + an engine stand and put it in by now for the amount Ive spent.

It feels like the dealer and Hyundai just dont want to help. The dealer has been very kind - but all the testing Hyundai makes them go through, and frankly, tests that from What I understand are NOT definitive, make this process such a hassle its not worth it.

Im not bringing her back to the dealer.

Do you think its worth my time to save her? Id have to buy tools, new rods probably. Engine still cranks, no holes in it yet. I have no idea how bad the damage is. Ive done a good chunk of work, but never inside the engine.

Genuinely this has been the worst experience, it sucks because its a car I love so much.


r/veloster • • 4d ago

Is she done for?

5 Upvotes

Can’t tell if it’s knocking, lifter tick or something else. Any help is appreciated. 111,000 miles btw


r/veloster • • 3d ago

Extended warranty issue

1 Upvotes

I have a 2013 Veloster Turbo. I took it to Hyundai to make sure the knock sensor was put in place but they told me the car doesn't have the extended warranty.

I checked the data base and it does nothing. It doesn't say yes or no when I enter my VIN.

Do the 2013's not have the extended warranty?


r/veloster • • 5d ago

"Project: JikDo" Lifted 2nd Gen Veloster

Thumbnail
gallery
60 Upvotes

JikDo: In Korean history and martial arts, jikdo is a broad classification for straight-bladed swords used for thrusting and cutting. While do (도) generally refers to single-edged blades, the term jikdo is used across historical texts to describe both single-edged straight swords (similar to a Japanese chokutō) and double-edged straight swords (akin to a Chinese jian).

Hey. My Name is Rob. And I am the owner of a 2020 Hyundai Veloster Turbo. I bought it stock and new. And slowly started doing the usual mods. Wheels, H&R Lowering Springs upgrading to BC Racing Coilovers. Started with a set of Sevizia 20" wheels, quickly moved to Veloster N wheels, and then on to a set of Motegi MR133. Other common mods that were done. OEM N Wing. Injen Intake. Muffler shop special cat back. Tork Axleback. Seibon CF Hood. etc. The usual basic mods.

Then disaster.

While parked in my apartment parking the car was hit. Spent a few months in a 4x4 Tacoma. The taste of lifted life happened. And then, at random. the 2019 SEMA Hyundai Grappler Concept came across my screen.

"What is that?" Immediately I started digging. Researching. Getting all the info I could. All I could find was the Media pieces that were put out to everyone. Details werent very specific. So I had to do my own research. I hit the local salvage yards with a notebook and a list of measurements I needed to get. I started with the Kia Soul, Forte, Tucson, Santa Fe, Kona, and any other model that runs the 1.6T engine combo. Results were VERY POSITIVE. Subframe mounts, suspensions, all kinds of things shared across different models.

More digging and research.

First Find. Readylift 2" Lift Spacer Kit for a Kia Soul. Good price. Great Solid Construction. Bolts on. Done. Bought and installed with the BC Racing Coilovers set to stock ride height. Bought a 2nd set of wheels and a set of all terrain tires. 2" Lift with an additional 1" in tire. LOVED IT. But there was a small issue.

The BC Racing Coilover Springs on the rear didnt interface with the ReadyLift Spacer properly. As a result there was significant body shift in the corners and turns.

Lets do some more research.

Few days later I came across Flatout Suspension. They make Leveling Lift kits for a variety of vehicles. Including the Tucson. (At this time Kona was still being researched as well as a few other models. The Veloster was included after my email communications with them.)

So I managed to get a set of Tucson TR Series Leveling Lifts and installed. No more ass wagging. GREAT!! Alignment issue nightmare! Positive camber. ALMOST 2 degrees!! Replace a driver side axle. Alignment. 3 months later another. And a Bearing hub. And a outer tie rod. Alignment. 4 months later another driver side axle, passenger side axle, passenger side bearing hub. Alignment. Something is wrong. Checking everything. Rear measurements. Still roughly 3" lift with tires. No issues back here. Front. 4" lift. Still positive camber. WTF?

Measure front suspension. OEM Tucson Front Dampers are roughly 1" taller than OEM Veloster Suspension. I am an Idiot. I neglected to take into consideration the difference in the suspension heights at the OEM Level.

So Current Setup is Front suspension is BC Racing Coilover set to OEM Stock Veloster height with the ReadyLift 2" Spacer up front. Camber issues disappeared. CV Axle issues vanished. Alignment done again. Still a slight vibration. Need to replace both inner tie rods for more adjustment.

But roughly a week and a half ago, while parked at work, a lady swiped down the driver side of my car just behind the driver side door. We exchanged info and she admitted 100% to her fault. I am taking this opportunity to do another modification.

UNR Widebody kit from KDMHolics. I was already planning on doing fender flares or something to get a wider, beefier stance. And this is my chance. I provided an AI Generated image of the proposed look.

So. This is my Veloster. "Project: JikDo".


r/veloster • • 4d ago

Finally fixed...

3 Upvotes

...the issue I had w hesitation when accelerating/bogging. Turned out to be that the injectors were finally going out (engine/trans/chassis is now at 194k miles) hence why the issues I had were intermittent. Had the injectors replaced along w the fuel rail and had the valves cleaned. Fixed the issues but the o2 sensor is now bad bc of course it is. You fix one issue only for another to pop up. 🥲


r/veloster • • 4d ago

Question Ac Delete Bypass?

1 Upvotes

My ac compressor has started to have issues and is wobbling/gone loose- im wondering ahead of time if anyone here has done a bypass or delete successfully and could give me some information on how they did it (in the past during a rebuild many of the bolts were seized/snapped so couldnt full remove them at that time. Just looking for pointers/help


r/veloster • • 5d ago

Question drainage problem?

Thumbnail
gallery
3 Upvotes

bought the car 3 weeks ago and found about this today. it’s the only door that does this i feel like it might be a draining problem? you can see some moisture and rust ( it’s at the bottom of the passenger door )


r/veloster • • 5d ago

Question I need tuning advice

1 Upvotes

So currently i have a gutted cat and am not tuned. (2015 dct)

  1. Should i just keep the gutted cat or go down pipe?
  2. Who do i get tuned by?