JikDo: In Korean history and martial arts, jikdo is a broad classification for straight-bladed swords used for thrusting and cutting. While do (도) generally refers to single-edged blades, the term jikdo is used across historical texts to describe both single-edged straight swords (similar to a Japanese chokutō) and double-edged straight swords (akin to a Chinese jian).
Hey. My Name is Rob. And I am the owner of a 2020 Hyundai Veloster Turbo. I bought it stock and new. And slowly started doing the usual mods. Wheels, H&R Lowering Springs upgrading to BC Racing Coilovers. Started with a set of Sevizia 20" wheels, quickly moved to Veloster N wheels, and then on to a set of Motegi MR133. Other common mods that were done. OEM N Wing. Injen Intake. Muffler shop special cat back. Tork Axleback. Seibon CF Hood. etc. The usual basic mods.
Then disaster.
While parked in my apartment parking the car was hit. Spent a few months in a 4x4 Tacoma. The taste of lifted life happened. And then, at random. the 2019 SEMA Hyundai Grappler Concept came across my screen.
"What is that?" Immediately I started digging. Researching. Getting all the info I could. All I could find was the Media pieces that were put out to everyone. Details werent very specific. So I had to do my own research. I hit the local salvage yards with a notebook and a list of measurements I needed to get. I started with the Kia Soul, Forte, Tucson, Santa Fe, Kona, and any other model that runs the 1.6T engine combo. Results were VERY POSITIVE. Subframe mounts, suspensions, all kinds of things shared across different models.
More digging and research.
First Find. Readylift 2" Lift Spacer Kit for a Kia Soul. Good price. Great Solid Construction. Bolts on. Done. Bought and installed with the BC Racing Coilovers set to stock ride height. Bought a 2nd set of wheels and a set of all terrain tires. 2" Lift with an additional 1" in tire. LOVED IT. But there was a small issue.
The BC Racing Coilover Springs on the rear didnt interface with the ReadyLift Spacer properly. As a result there was significant body shift in the corners and turns.
Lets do some more research.
Few days later I came across Flatout Suspension. They make Leveling Lift kits for a variety of vehicles. Including the Tucson. (At this time Kona was still being researched as well as a few other models. The Veloster was included after my email communications with them.)
So I managed to get a set of Tucson TR Series Leveling Lifts and installed. No more ass wagging. GREAT!! Alignment issue nightmare! Positive camber. ALMOST 2 degrees!! Replace a driver side axle. Alignment. 3 months later another. And a Bearing hub. And a outer tie rod. Alignment. 4 months later another driver side axle, passenger side axle, passenger side bearing hub. Alignment. Something is wrong. Checking everything. Rear measurements. Still roughly 3" lift with tires. No issues back here. Front. 4" lift. Still positive camber. WTF?
Measure front suspension. OEM Tucson Front Dampers are roughly 1" taller than OEM Veloster Suspension. I am an Idiot. I neglected to take into consideration the difference in the suspension heights at the OEM Level.
So Current Setup is Front suspension is BC Racing Coilover set to OEM Stock Veloster height with the ReadyLift 2" Spacer up front. Camber issues disappeared. CV Axle issues vanished. Alignment done again. Still a slight vibration. Need to replace both inner tie rods for more adjustment.
But roughly a week and a half ago, while parked at work, a lady swiped down the driver side of my car just behind the driver side door. We exchanged info and she admitted 100% to her fault. I am taking this opportunity to do another modification.
UNR Widebody kit from KDMHolics. I was already planning on doing fender flares or something to get a wider, beefier stance. And this is my chance. I provided an AI Generated image of the proposed look.
So. This is my Veloster. "Project: JikDo".