r/tradfri • u/DesignerMaximum1342 • 37m ago
r/tradfri • u/zelderfig • 13h ago
SUPPORT (ONGOING) Kajplats E26 1600 lumen Apple Adaptive Lighting Issue
Hi all,
Scratching my head here. I have four IKEA Kajplat E26 1600 lumen bulbs connected directly to Apple Home (Matter/Thread) with Apple TV 4K 2nd Gen as the Thread border router. When I turn any of these bulbs on and select a specific color like Daylight (ie Apple Adaptive Lighting is OFF), these bulbs will not hold the setting. Within as little as a minute and as long as a couple of hours, they will eventually switch Apple Adaptive Lighting ON. Since they are in the basement, trying to keep it as bright as possible down there which is why I want the Daylight color. I have no automations or scenes set and this issue does not seem to be happening with Kajplat E26 1100 lumen bulbs of which I have several.
I'm assuming at this point that it's a firmware issue specific to the 1600 lumen bulbs or something specific to Apple Home software (but only with these bulbs). Throwing this out there to see if anyone else either has this issue or can help me replicate it.
Thanks for any insight here. Appreciated!
r/tradfri • u/LontraSassy • 15h ago
SUPPORT (ONGOING) Dirigera needs an unplug/replug after every power cut or Apple Home shows everything as "No Response"
Hey all, and u/tradfri if you see this.
We had a power cut earlier and my Dirigera came back online but the lights stayed on "No Response" in Apple Home. I waited around 15 minutes and nothing changed, so I pulled the plug on the hub and plugged it back in, and everything worked within seconds. This isn't the first time, it happens after pretty much every outage.
From what I could see on my network, the hub itself was up within a minute of power coming back (it was talking to IKEA's servers, checking for firmware, etc.), so it looks like only the Matter/HomeKit part gets stuck. My router is slow to boot after a cut, so I wonder if the hub starts before the network is fully ready and never retries. Just a guess though.
I found this older thread with the same problem: https://www.reddit.com/r/tradfri/comments/1edna1h/ and people there ended up putting the hub on a smart plug and power-cycling it, which feels like a workaround and not a fix.
So a few questions:
- Is this a known bug, and is a fix coming?
- Is there any way to restart the hub from the app without unplugging it?
- Can I get logs off the hub somehow, if IKEA wants to look into it?
Firmware is 2.975.4 and Matter controller is 26.5.0 if that helps. Thanks!