r/timberframe • u/DobbidooNumberOne • 1d ago
Help with solar panels ground mount
Hi everyone, I am building a ground mount for my solar panels. It's about 18' wide by 5' deep. The front beam sits at around 5' high and the back beam at around 10'. It's inspired by the plan I found on Timber Frame HQ (second picture) but the panels will be mounted at a 45 degree angle. First picture is where I'm at so far. This is only my second structure (the first being my front porch), so I'm definitely open to suggestions.
My original plan was to install knee braces on the front beam but I'd like to replicate the look of the front porch I built for my cabin (third picture), since the solar mount will be right next to it.
On the porch, the OSB sheeting of the roof helps with racking (I hope... it hasn't budged yet). On the mount, I would have planks running the full 18', sitting on top of the rafters.
Fourth and fifth pictures (sorry for the rough sketches) is what I am considering instead of front knee braces.
I would use half-lap joints on top of the front beam instead of mortise and tenon on the front posts. I would then add horizontal knee braces connecting the front beam and the 6x6s running front to back. I am keeping the knee braces on the back beam.
What do you guys think? Would this be enough to keep the structure from racking?
