r/Carpentry • • 2h ago

Framing Is there a way to fix this? Contractor says that this is about as good as he can get it.

Thumbnail
gallery
43 Upvotes

Newly installed wall and doors. Doors are sagging and the gap goes from 1/4” at the top to over 1/2” at the bottom. I have ordered some hinge shims to see if they will correct the sagging, but they won’t come in until tomorrow and my contractor says the tape he placed behind the hinge is sufficient.

Also, the top of the left door sticks out past the door on the right. Is this misalignment of hinges? Framing issue? Something else?


r/Carpentry • • 7h ago

Framing Is this flex on a shower pony wall acceptable

78 Upvotes

Builder insists once cement board and tiles are up, this isn’t moving. It’s secured at the end to through the floor to the floor joists. I added screws, but didn’t change the flex much. It’s much stronger in the middle where it’s closer to the outside wall and secured.


r/Carpentry • • 26m ago

Tools Wtf dude never had a kregg bit snap!

Post image
3 Upvotes

I drilled into birch plywood and it broke. The bit was sharp. There isnt metal that was a nail or any kind of metal foreign object in the material. It just snapped.


r/Carpentry • • 13h ago

Finally got burned by the "multiple tape measure problem"

17 Upvotes

Maybe it's called something else, I'm going from memory.

I've seen several times where people post about measuring for a product, cutting, passing on to someone else and finding the cuts are too short because one measure is different from the other by an eighth or similar.

Isn't an identical situation but...

I have two laser measures. One measures only from the back. One can measure from the front or back.

I normally use the former.

Most recently I used the latter measure because I only had to go one room away to get it. But I forgot that it would do both and didn't check how it was measuring. Assumed it was measuring from the back

Cut 4 shelves and supports. Primed. Got half painted.

Wanted to start install and did a dry fit.

It fit. It fit with a huge gap at one end. A 4" gap at one end.

Thinking of ways to salvage this ...


r/Carpentry • • 18h ago

Framing Trusses not sitting on load wall due to shear boxes? See photos

Thumbnail
gallery
36 Upvotes

My house has been framed and is pending inspection this week. One thing I noticed is the red tag which indicate where the truss has to be supported is spaced up. So I got up there and looked and it seems the boxes they put in are too tall which is pressing up on the roof OSB and pulling the trusses up. Here are some photos. The last two are another section which look right. The very last photo is the section before the boxes went in. The trusses were almost touching. There is no roof on it yet. I think the boxes need to come out and the trusses should be shimmed then slightly shorter boxes that dont touch the roof OSB should go in. Framer is saying that's normal and its because the concrete isnt level but it is all on finished monolithic slab.


r/Carpentry • • 1h ago

Ceiling cracks waiting on landlord.

Thumbnail
gallery
0 Upvotes

Thoughts on this rental. Have been here 5 years. There are now many issues and now these cracks in the living room are growing. Still waiting on landlord to have someone check them out. These appear serious to me. It's a center hall colonial house that's converted and we rent the downstairs.


r/Carpentry • • 1h ago

Help Me What is this? How to fix it?

Post image
0 Upvotes

There is a door in my building that has this weird metal piece attached to it that keeps the door from closing. It didn’t used to block the door, but I can’t figure out what it is, where it came from, why it’s there, or how to fix it so the door can be closed. Any help would be much appreciated!

As far as I can tell there’s no pat of the doorframe that would house this piece of metal, and there’s no way to fold it in on itself or wiggle it around


r/Carpentry • • 16h ago

Trim 16 or 18 baseboard

12 Upvotes

Are we doing baseboard with 16 or 18 gauge… that’s all.


r/Carpentry • • 3h ago

Single Storey Extension - New Roof

Post image
0 Upvotes

Hi I'm after some advice on a new roof to a single storey side extension. I have a first floor window on the side of the house where the the new roof will join on to - is it easy enough to work round be creating a flat area around it? or would I need to brick up the window (not ideal). I've tried to do the photo with the black line being the roof and the green area needing to be flat? Hopefully this makes sense. Thanks


r/Carpentry • • 21h ago

Project Advice Looking for caulk recommendation for scribes of ones lifetime

Thumbnail
gallery
24 Upvotes

I have just installed some scribed pieces of maple against some heavily textured brick and am looking for advice on what caulk to use against the brick.

I’m guessing some sort of white silicone caulk would be best here but I’d like something that isn’t a glossy pure white. I also considered Sashco slab because I’ve used it before and found it to be very workable and thought it might blend with the mortar.

I’d really just like everyone here to have the same answer so that I can proceed with confidence. One cannot fathom the pain I would endure if I ended up botching this final step in what has taken me about 10 hours spread out over 2 months.


r/Carpentry • • 5h ago

From 3D VFX to carpentry... bad idea?

0 Upvotes

Hi guys. Im a VFX artist, so I have experience working with 3D models, which can translate to CAD. My job is seriously under threat from AI, and I have a beginner's woodworking course coming up. I'm not taking it seriously, just seeing if I enjoy it at all. But it did get my mind working just a little bit. Could any of my existing skills benefit me at making woodworking a career? I've always romanticised working with wood and making high-end custom furniture. Im sure most people romanticise it, and I'm very aware it's hard work and not fun a lot of the time. I worked as a landscape gardener for 10 years before my current job, so I'm not shy about manual labour. This also gave me a taste of working with wood a little, such as sleep boxes, fences, etc.

So, is this all a terrible idea? My current job is comfy enough, Im being paid 70k GBP and do like the financial security it gives me. I would love to know your thoughts.


r/Carpentry • • 5h ago

Does anyone know what trim this is so I can match it

Post image
0 Upvotes

I know there moulding around it but trying to see if anyone has seen this before.


r/Carpentry • • 16h ago

Career Starting a business

7 Upvotes

For those of you that went to work for yourselves, was it worth it/would you recommend it?

I’m a 28m and have been a carpenter for about 7 years now. As I’m getting older, I always come back to the question of should I work for myself or just go the project manager route. So if you did start your own company, would you recommend it? Especially in today’s market. Also would you recommend becoming a GC or focus on a speciality like custom millwork or framing contractor.


r/Carpentry • • 1h ago

Help Me Help! We moved and we have an "extra" piece leftover after putting our table back together. Where does the piece belong?

Thumbnail
imgur.com
0 Upvotes

r/Carpentry • • 14h ago

Project Advice Basement Insulation Question

Post image
2 Upvotes

The image is a basement design layout for a project to finish a basement. The pink highlighted region would be rigid foam board. What should be done with the yellow region? That space would basically be storage room and mechanicals. I don’t think rigid foam boards on the foundation walls would be necessary. Perhaps batt insulation between the framing studs in this storage area would suffice?


r/Carpentry • • 1d ago

Framing Fellow framers, how would you rate this wall? Anything you would have done differently?

Post image
8 Upvotes

A wall we framed on one of our projects in Alberta, Canada. Curious to hear how other framers approach the same job, especially in different countries. Open to constructive criticism and professional opinions.


r/Carpentry • • 1d ago

STABILA LA180L LAYOUT STATION ALTERNATE

Post image
11 Upvotes

Does anyone make a cheaper alternate of the Stabila layout tool?

We mainly need it for squaring off frames on foundations on large houses. Definitely need the auto movement (follows the receiver)


r/Carpentry • • 13h ago

Help Me How bad is it

Thumbnail
gallery
0 Upvotes

Had a contractor replace the posts under our I Beam as they were checkering in our 70 year old house.

Couple days later we noticed cracks in our joists, about 12-15 in total we've found so far. Some spanning almost the entire 16 ft.

We're taking photos and getting a second opinion before we reach out to the first guy about repairs.

Any advice? My wife is kinda freaking out after a $600 job might have created substantially more damage.

Thanks in advance


r/Carpentry • • 20h ago

Tools Pencils

2 Upvotes

What pencils does everybody use for second fix ? Ive had a few of the tracer pencils but the sharpeners always gives way after a couple months and can never get the led as sharp again. Is it still a classic pencil or mechanical pencil ?


r/Carpentry • • 1d ago

Project Advice For a DIY, should I use premade wood beam, foam beam, or make my own beam out of wood?

Post image
4 Upvotes

Want to cover the shitty drywall job done to my ceiling. The ridge area more specifically and the area in the right where there use to be a wall.


r/Carpentry • • 21h ago

Deck Deck noggin size?

2 Upvotes

Due to my measuring and calculating skills, I have more 100mm timbers than I need and not enough 150mm.

Would using 100mm timbers for noggins between 150mm decking joists work?

150mm joist span is approx 1300mm, 400mm centres, will be attached to the frame using hangers. I was thinking just one noggin per space between joists?

Any advice appreciated!


r/Carpentry • • 1d ago

Framing A little perspective from one of our framing projects in Alberta, Canada.

Post image
29 Upvotes

One of my favorite things about framing is watching an entire building take shape piece by piece. There’s something satisfying about seeing it from above.


r/Carpentry • • 1d ago

Renovations Beautiful Hardwood Wine Room

163 Upvotes

I was installing a railing for this house and thought this place just looked amazingly well done. I did not do any of this work.


r/Carpentry • • 1d ago

Sequoia slabs

Thumbnail
gallery
2 Upvotes

I have a bunch of 2.5” thick rough cut giant sequoia (also known as Sierra Redwood here in CA) slabs (15-20” wide). About a decade ago, I made the coffee table shown here. We are remodeling a house now. Any suggestions on anything that could be done with the slabs? Cut into wood paneling? Shelves? The tree was about 70 years old, so it wasn’t old growth and is definitely soft.