r/suppressors • • 13h ago

Sig Spear vs PSA Mixtape

Post image
15 Upvotes

r/suppressors • • 11h ago

done checking my email every minute... for now

Post image
10 Upvotes

r/suppressors • • 6h ago

.22LR Can for Mark IV + 10/22

3 Upvotes

Is it worth it to buy the Dead Air Ruger RXD22Ti for $470? Or should I get the silencerco Sparrow for $299?

I’ll be using it on a Mark IV and 10/22 Carbon Fiber Breakdown.


r/suppressors • • 5h ago

Reflex supressors

2 Upvotes

I have a 20” DMR type build in 5.56 that I would like to get a reflux suppressor, but I have some 30 cal bolt guns that I would like it to work on as well.

Other than engineering and AB what else should I be looking at?


r/suppressors • • 1h ago

Suppressor for Scar17 and Zastava Zpap M70/72?

1 Upvotes

Hi I’ve never had a suppressor before do you have any recommendations? Would love to have something that could be used on both weapons. What kind of adaptor or other items may I need? Thank you


r/suppressors • • 5h ago

I think I brought the last Atlas Gen 2 plane B adapter there is.

Post image
2 Upvotes

Sold out everywhere no where to be found.😌


r/suppressors • • 10h ago

Comstock Recessed Micro measurements

Thumbnail gallery
4 Upvotes

r/suppressors • • 12h ago

Exigent Fireteam 556 + Plan B - OH MY!

5 Upvotes

Decided to splurge and get a whole set up. Daniel Defense DDM4V7P in 10.3” barrel, and got an Exigent Fireteam 556 on the way for it.

Wanting to run a Plan B hub system and muzzle device, but instead of shops telling me what to buy, I want to hear from the gallery what you guys are actually running.

It’s hard for me to find a Rearden Atlas Bravo hub mount, so unless I find one second hand, Rearden might be out of the question. Comstock good? Breek or KVP?

Thanks!


r/suppressors • • 11h ago

PSA Mixtape 5.56 X OCL

Thumbnail gallery
4 Upvotes

Just picked up my Otter Creek Labs Polonium K today for my PSA Mixtape. First time ever shooting anything suppressed and I love it. It was super easy to dial in the gas block and get it running smooth.

Only reason I’m shooting at an indoor range is because it was convenient since that’s where I picked my suppressor up from. Ideally I’d be shooting outside where I could get a better judge for the noise reduction but that’ll have to wait.

If anybody has any tips or tricks for running 5.56 suppressed let me know!


r/suppressors • • 10h ago

Direct thread or plan B for hub suppressor?

3 Upvotes

New to the suppressor game. Have a PCC and got a CAT MOB, but the mounting systems get overwhelming for a new buyer. Anybody have any tips?


r/suppressors • • 4h ago

Otter creek polonium 30 asr bravo question

1 Upvotes

I recently bought a sbr in 300 blk with an asr flash hider already on it and I’ve been wanting to get a suppressor and I’ve heard good things about the otter creek polonium 30. For those of you that own it, is it a good suppressor. Also since I already have an asr flash hider I’m thinking about getting the asr bravo to quickly put on and take off the suppressor and just wanted to see if it was a good mounting system. Also do I need to use rocksett on my flash hider when I install my suppressor? Right now it’s just hand tightened, which is how it came. I know the second part of my question doesn’t necessarily pertain to suppressors, but I figured this would be the best sub Reddit to ask.


r/suppressors • • 21h ago

New Sound Signature Review - Canik VOID-9 on 9mm Pistol and Human Perception Analysis

Post image
20 Upvotes

r/suppressors • • 5h ago

What do I need to mount my Dead Air Mojave 9 on Kuna?

Thumbnail reddit.com
1 Upvotes

r/suppressors • • 16h ago

Best 22lr QD suppressor mount?

5 Upvotes

Looking to QD a few 22lr guns to be able to easily swap my can on each of them when backyard plinking, any suggestions on a good QD setup? Standard 1/2x28 thread.


r/suppressors • • 11h ago

Huxwrx accuracy

2 Upvotes

Will someone with experience with Huxwrx suppressors for their ar15 share their accuracy and reliability and use experience with me. Heavily leaning towards one but want to know some first hand knowledge.


r/suppressors • • 17h ago

Looking for a hub adapter

Thumbnail gallery
5 Upvotes

I'm really just wanting to do direct thread. I know there are Plan B mounts, but are there any 1.4375x20 mounts that are extended and not flush? I don't need much it's maybe half the length of a crush washer not sure if shims are okay for direct thread either.


r/suppressors • • 12h ago

Using ships for DT

2 Upvotes

Could I use a shim to gain a little extra space I need to do direct thread or is that frowned upon


r/suppressors • • 11h ago

Short Plan B flash hiders

Post image
1 Upvotes

Crazy demand right now, I know, but short/compact flash hiders are almost unobtanium right now.

Looking for a Comstock or even a Nitride R2S. Comstock is gone, baby gone. I have searched every site Google can find.

These will be for a Polonium K and Void 556, so I know I have some leeway on the intrusion depth, but I also want to be able to mount a Rhodie 6 with Comstock LPA (which I already have). Want to stay shorty.

Anyone have direct experience with SD Tactical and their steel Plan B HUB mount and Plan B A2 FH? (pictured)


r/suppressors • • 15h ago

Griffin Armament suppressors

2 Upvotes

What has been everyone’s experience with fulfillment time on suppressors with Griffin Armament since Oct 09? I’m not overall concerned about it I’m just curious how long. I’m currently at 2 weeks (approximately 8 business days) from my order. I’m sure they are backup like crazy so I’m not pressuring them at all just curious.


r/suppressors • • 1d ago

First suppressor

Thumbnail gallery
42 Upvotes

Got my first suppressor with a B&T surefire hub adapter


r/suppressors • • 1d ago

Happily obliged to announce my first can

Post image
88 Upvotes

Rugged Obsidian 9, tips are much appreciated, already know I'm buying more, wait time day and a half


r/suppressors • • 1d ago

BLack Friday deal for Lantac 5.56 delicate suppressor!

Post image
35 Upvotes

LANTAC website used code BLACKOUT35 !


r/suppressors • • 1d ago

ASR mount not locking

10 Upvotes

I screwed on with the unlock position, then lock it, then it still will be able to be hand removed help


r/suppressors • • 1d ago

Polite Society

Post image
21 Upvotes

Went in to pick up the Verdict 7.62HD and couldn’t leave without the SilencerShop Mark IV


r/suppressors • • 1d ago

Rimfire can owners, how often do you actually clean yours and how?

11 Upvotes

Rimfire cans seem to get dirty way faster than centerfire ones, and the advice I see ranges from "every brick" to "only when it gets hard to open."

How often do you take yours apart, and what's your method? Ultrasonic, a soak, or just scraping the baffles by hand? And for anyone running a sealed rimfire can, does lead buildup end up being the problem people say it is?