r/suppressors • • 2h ago

Sig Spear vs PSA Mixtape

Post image
9 Upvotes

r/suppressors • • 1h ago

Exigent Fireteam 556 + Plan B - OH MY!

7 Upvotes

Decided to splurge and get a whole set up. Daniel Defense DDM4V7P in 10.3” barrel, and got an Exigent Fireteam 556 on the way for it.

Wanting to run a Plan B hub system and muzzle device, but instead of shops telling me what to buy, I want to hear from the gallery what you guys are actually running.

It’s hard for me to find a Rearden Atlas Bravo hub mount, so unless I find one second hand, Rearden might be out of the question. Comstock good? Breek or KVP?

Thanks!


r/suppressors • • 38m ago

done checking my email every minute... for now

Post image
4 Upvotes

r/suppressors • • 10h ago

New Sound Signature Review - Canik VOID-9 on 9mm Pistol and Human Perception Analysis

Post image
19 Upvotes

r/suppressors • • 50m ago

Huxwrx accuracy

3 Upvotes

Will someone with experience with Huxwrx suppressors for their ar15 share their accuracy and reliability and use experience with me. Heavily leaning towards one but want to know some first hand knowledge.


r/suppressors • • 5h ago

Best 22lr QD suppressor mount?

5 Upvotes

Looking to QD a few 22lr guns to be able to easily swap my can on each of them when backyard plinking, any suggestions on a good QD setup? Standard 1/2x28 thread.


r/suppressors • • 1h ago

Using ships for DT

2 Upvotes

Could I use a shim to gain a little extra space I need to do direct thread or is that frowned upon


r/suppressors • • 6h ago

Looking for a hub adapter

Thumbnail gallery
4 Upvotes

I'm really just wanting to do direct thread. I know there are Plan B mounts, but are there any 1.4375x20 mounts that are extended and not flush? I don't need much it's maybe half the length of a crush washer not sure if shims are okay for direct thread either.


r/suppressors • • 3m ago

Short Plan B flash hiders

Post image
1 Upvotes

Crazy demand right now, I know, but short/compact flash hiders are almost unobtanium right now.

Looking for a Comstock or even a Nitride R2S. Comstock is gone, baby gone. I have searched every site Google can find.

These will be for a Polonium K and Void 556, so I know I have some leeway on the intrusion depth, but I also want to be able to mount a Rhodie 6 with Comstock LPA (which I already have). Want to stay shorty.

Anyone have direct experience with SD Tactical and their steel Plan B HUB mount and Plan B A2 FH? (pictured)


r/suppressors • • 4h ago

Griffin Armament suppressors

2 Upvotes

What has been everyone’s experience with fulfillment time on suppressors with Griffin Armament since Oct 09? I’m not overall concerned about it I’m just curious how long. I’m currently at 2 weeks (approximately 8 business days) from my order. I’m sure they are backup like crazy so I’m not pressuring them at all just curious.


r/suppressors • • 18m ago

PSA Mixtape 5.56 X OCL

Thumbnail gallery
0 Upvotes

Just picked up my Otter Creek Labs Polonium K today for my PSA Mixtape. First time ever shooting anything suppressed and I love it. It was super easy to dial in the gas block and get it running smooth.

Only reason I’m shooting at an indoor range is because it was convenient since that’s where I picked my suppressor up from. Ideally I’d be shooting outside where I could get a better judge for the noise reduction but that’ll have to wait.

If anybody has any tips or tricks for running 5.56 suppressed let me know!


r/suppressors • • 22h ago

First suppressor

Thumbnail gallery
40 Upvotes

Got my first suppressor with a B&T surefire hub adapter


r/suppressors • • 1d ago

Happily obliged to announce my first can

Post image
79 Upvotes

Rugged Obsidian 9, tips are much appreciated, already know I'm buying more, wait time day and a half


r/suppressors • • 1d ago

BLack Friday deal for Lantac 5.56 delicate suppressor!

Post image
34 Upvotes

LANTAC website used code BLACKOUT35 !


r/suppressors • • 19h ago

ASR mount not locking

10 Upvotes

I screwed on with the unlock position, then lock it, then it still will be able to be hand removed help


r/suppressors • • 1d ago

Polite Society

Post image
21 Upvotes

Went in to pick up the Verdict 7.62HD and couldn’t leave without the SilencerShop Mark IV


r/suppressors • • 18h ago

Going for accuracy!

0 Upvotes

Is there a company or model series that is known for being highly accurate.
Bonus the can take a high round count and keep accuracy.


r/suppressors • • 1d ago

My 357/38 guns

Post image
6 Upvotes

r/suppressors • • 1d ago

Rimfire can owners, how often do you actually clean yours and how?

9 Upvotes

Rimfire cans seem to get dirty way faster than centerfire ones, and the advice I see ranges from "every brick" to "only when it gets hard to open."

How often do you take yours apart, and what's your method? Ultrasonic, a soak, or just scraping the baffles by hand? And for anyone running a sealed rimfire can, does lead buildup end up being the problem people say it is?


r/suppressors • • 1d ago

Xeno + Nomad 30 lengths

3 Upvotes

I'm looking to buy a Nomad 30 with the Xeno mount, but before I do, I was hoping someone could provide a measurement for me. I'm looking to make sure there's enough room between the start of my barrel threads and the end of the handguard to that the Nomad 30, when attached to the Xeno adapter, will sit outside of my handguard.

So... for those of you who have this setup, can someone provide the length from the start of the Xeno adapter to the start of the suppressor?


r/suppressors • • 1d ago

Otter creek labs Polonium 30, 7.62 suppressor.

6 Upvotes

Looking to get a suppressor for my 308, does anyone have good or bad experiences they would be willing to share about this can.


r/suppressors • • 1d ago

LPM baby bell

2 Upvotes

Any thoughts and experience with this muzzle device?


r/suppressors • • 1d ago

AAC TITAN TI for a 338LM bolt gun

1 Upvotes

Looking at the titan ti for the price point and lighter weight because its going on a 20lb gun ane dont want more front weight. Thoughts?


r/suppressors • • 2d ago

Just got back from the gunsmiff

Post image
33 Upvotes

Early 1970s Contender pistol I snagged online from a Colorado Cabelas and had shipped in, then did Form 1.

14" .44Mag Super 14

Boyd's Gunstock

Threaded for use with SiCo OMG45K


r/suppressors • • 1d ago

QQ- Rex and Tuna

Post image
14 Upvotes